Alexander Larsson
5 exploits
Active since Feb 2018
Flatpak < 0.8.9 - Interpretation Conflict
In dbus-proxy/flatpak-proxy.c in Flatpak before 0.8.9, and 0.9.x and 0.10.x before 0.10.3, crafted D-Bus messages to the host can be used to break out of the sandbox, because whitespace handling in the proxy is not identical to whitespace handling in the daemon.
CVSS 8.8
Bubblewrap <0.4.1 - Privilege Escalation
Bubblewrap (bwrap) before version 0.4.1, if installed in setuid mode and the kernel supports unprivileged user namespaces, then the `bwrap --userns2` option can be used to make the setuid process keep running as root while being traceable. This can in turn be used to gain root permissions. Note that this only affects the combination of bubblewrap in setuid mode (which is typically used when unprivileged user namespaces are not supported) and the support of unprivileged user namespaces. Known to be affected are: * Debian testing/unstable, if unprivileged user namespaces enabled (not default) * Debian buster-backports, if unprivileged user namespaces enabled (not default) * Arch if using `linux-hardened`, if unprivileged user namespaces enabled (not default) * Centos 7 flatpak COPR, if unprivileged user namespaces enabled (not default) This has been fixed in the 0.4.1 release, and all affected users should update.
CVSS 7.2
Flatpak < 1.10.7 - Path Traversal
Flatpak is a Linux application sandboxing and distribution framework. A path traversal vulnerability affects versions of Flatpak prior to 1.12.3 and 1.10.6. flatpak-builder applies `finish-args` last in the build. At this point the build directory will have the full access that is specified in the manifest, so running `flatpak build` against it will gain those permissions. Normally this will not be done, so this is not problem. However, if `--mirror-screenshots-url` is specified, then flatpak-builder will launch `flatpak build --nofilesystem=host appstream-utils mirror-screenshots` after finalization, which can lead to issues even with the `--nofilesystem=host` protection. In normal use, the only issue is that these empty directories can be created wherever the user has write permissions. However, a malicious application could replace the `appstream-util` binary and potentially do something more hostile. This has been resolved in Flatpak 1.12.3 and 1.10.6 by changing the behaviour of `--nofilesystem=home` and `--nofilesystem=host`.
CVSS 7.7
Flatpak <1.14.0-1.15.10 - Info Disclosure
Flatpak is a Linux application sandboxing and distribution framework. Prior to versions 1.14.0 and 1.15.10, a malicious or compromised Flatpak app using persistent directories could access and write files outside of what it would otherwise have access to, which is an attack on integrity and confidentiality.
When `persistent=subdir` is used in the application permissions (represented as `--persist=subdir` in the command-line interface), that means that an application which otherwise doesn't have access to the real user home directory will see an empty home directory with a writeable subdirectory `subdir`. Behind the scenes, this directory is actually a bind mount and the data is stored in the per-application directory as `~/.var/app/$APPID/subdir`. This allows existing apps that are not aware of the per-application directory to still work as intended without general home directory access.
However, the application does have write access to the application directory `~/.var/app/$APPID` where this directory is stored. If the source directory for the `persistent`/`--persist` option is replaced by a symlink, then the next time the application is started, the bind mount will follow the symlink and mount whatever it points to into the sandbox.
Partial protection against this vulnerability can be provided by patching Flatpak using the patches in commits ceec2ffc and 98f79773. However, this leaves a race condition that could be exploited by two instances of a malicious app running in parallel. Closing the race condition requires updating or patching the version of bubblewrap that is used by Flatpak to add the new `--bind-fd` option using the patch and then patching Flatpak to use it. If Flatpak has been configured at build-time with `-Dsystem_bubblewrap=bwrap` (1.15.x) or `--with-system-bubblewrap=bwrap` (1.14.x or older), or a similar option, then the version of bubblewrap that needs to be patched is a system copy that is distributed separately, typically `/usr/bin/bwrap`. This configuration is the one that is typically used in Linux distributions. If Flatpak has been configured at build-time with `-Dsystem_bubblewrap=` (1.15.x) or with `--without-system-bubblewrap` (1.14.x or older), then it is the bundled version of bubblewrap that is included with Flatpak that must be patched. This is typically installed as `/usr/libexec/flatpak-bwrap`. This configuration is the default when building from source code.
For the 1.14.x stable branch, these changes are included in Flatpak 1.14.10. The bundled version of bubblewrap included in this release has been updated to 0.6.3. For the 1.15.x development branch, these changes are included in Flatpak 1.15.10. The bundled version of bubblewrap in this release is a Meson "wrap" subproject, which has been updated to 0.10.0. The 1.12.x and 1.10.x branches will not be updated for this vulnerability. Long-term support OS distributions should backport the individual changes into their versions of Flatpak and bubblewrap, or update to newer versions if their stability policy allows it. As a workaround, avoid using applications using the `persistent` (`--persist`) permission.
CVSS 10.0
Flatpak <1.14.0-1.15.10 - Info Disclosure
Flatpak is a Linux application sandboxing and distribution framework. Prior to versions 1.14.0 and 1.15.10, a malicious or compromised Flatpak app using persistent directories could access and write files outside of what it would otherwise have access to, which is an attack on integrity and confidentiality.
When `persistent=subdir` is used in the application permissions (represented as `--persist=subdir` in the command-line interface), that means that an application which otherwise doesn't have access to the real user home directory will see an empty home directory with a writeable subdirectory `subdir`. Behind the scenes, this directory is actually a bind mount and the data is stored in the per-application directory as `~/.var/app/$APPID/subdir`. This allows existing apps that are not aware of the per-application directory to still work as intended without general home directory access.
However, the application does have write access to the application directory `~/.var/app/$APPID` where this directory is stored. If the source directory for the `persistent`/`--persist` option is replaced by a symlink, then the next time the application is started, the bind mount will follow the symlink and mount whatever it points to into the sandbox.
Partial protection against this vulnerability can be provided by patching Flatpak using the patches in commits ceec2ffc and 98f79773. However, this leaves a race condition that could be exploited by two instances of a malicious app running in parallel. Closing the race condition requires updating or patching the version of bubblewrap that is used by Flatpak to add the new `--bind-fd` option using the patch and then patching Flatpak to use it. If Flatpak has been configured at build-time with `-Dsystem_bubblewrap=bwrap` (1.15.x) or `--with-system-bubblewrap=bwrap` (1.14.x or older), or a similar option, then the version of bubblewrap that needs to be patched is a system copy that is distributed separately, typically `/usr/bin/bwrap`. This configuration is the one that is typically used in Linux distributions. If Flatpak has been configured at build-time with `-Dsystem_bubblewrap=` (1.15.x) or with `--without-system-bubblewrap` (1.14.x or older), then it is the bundled version of bubblewrap that is included with Flatpak that must be patched. This is typically installed as `/usr/libexec/flatpak-bwrap`. This configuration is the default when building from source code.
For the 1.14.x stable branch, these changes are included in Flatpak 1.14.10. The bundled version of bubblewrap included in this release has been updated to 0.6.3. For the 1.15.x development branch, these changes are included in Flatpak 1.15.10. The bundled version of bubblewrap in this release is a Meson "wrap" subproject, which has been updated to 0.10.0. The 1.12.x and 1.10.x branches will not be updated for this vulnerability. Long-term support OS distributions should backport the individual changes into their versions of Flatpak and bubblewrap, or update to newer versions if their stability policy allows it. As a workaround, avoid using applications using the `persistent` (`--persist`) permission.
CVSS 10.0