Arm Ltd.

8 exploits Active since Apr 2024
CVE-2026-42627 WRITEUP MEDIUM WRITEUP
Arm ArmNN through 2026-03-27 - Heap-Based Buffer Over-Read via Integer Overflow in TensorShape::GetNumElements()
In Arm ArmNN through 2026-03-27, an integer overflow in TensorShape::GetNumElements() in armnn/Tensor.cpp allows a crafted TFLite model file to bypass buffer size validation and trigger a heap-based buffer over-read during model optimization. The overflow occurs when multiplying tensor dimensions using 32-bit unsigned arithmetic without overflow detection, causing GetNumBytes() to return an understated allocation size. During Optimize()->InferOutputShapes(), the BatchToSpaceNdLayer reads beyond the allocated buffer.
CVSS 6.2
CVE-2024-22905 WRITEUP HIGH WRITEUP
ARM mbed-os 6.17.0 - Buffer Overflow via hciTrSerialRxIncoming Function
Buffer Overflow vulnerability in ARM mbed-os v.6.17.0 allows a remote attacker to execute arbitrary code via a crafted script to the hciTrSerialRxIncoming function.
CVSS 7.0
CVE-2024-48981 WRITEUP HIGH WRITEUP
MBed OS 6.16.0 - Buffer Overflow via HCI Packet Header Parsing
An issue was discovered in MBed OS 6.16.0. During processing of HCI packets, the software dynamically determines the length of the packet header by looking up the identifying first byte and matching it against a table of possible lengths. The initial parsing function, hciTrSerialRxIncoming does not drop packets with invalid identifiers but also does not set a safe default for the length of unknown packets' headers, leading to a buffer overflow. This can be leveraged into an arbitrary write by an attacker. It is possible to overwrite the pointer to a not-yet-allocated buffer that is supposed to receive the contents of the packet body. One can then overwrite the state variable used by the function to determine which state of packet parsing is currently occurring. Because the buffer is allocated when the last byte of the header has been copied, the combination of having a bad header length variable that will never match the counter variable and being able to overwrite the state variable with the resulting buffer overflow can be used to advance the function to the next step while skipping the buffer allocation and resulting pointer write. The next 16 bytes from the packet body are then written wherever the corrupted data pointer is pointing.
CVSS 7.5
CVE-2024-48982 WRITEUP HIGH WRITEUP
MBed OS 6.16.0 - Buffer Overflow in HCI Packet Length Parsing
An issue was discovered in MBed OS 6.16.0. Its hci parsing software dynamically determines the length of certain hci packets by reading a byte from its header. This value is assumed to be greater than or equal to 3, but the software doesn't ensure that this is the case. Supplying a length less than 3 leads to a buffer overflow in a buffer that is allocated later. It is simultaneously possible to cause another integer overflow by supplying large length values because the provided length value is increased by a few bytes to account for additional information that is supposed to be stored there. This bug is trivial to exploit for a denial of service but is not certain to suffice to bring the system down and can generally not be exploited further because the exploitable buffer is dynamically allocated.
CVSS 7.5
CVE-2024-48983 WRITEUP HIGH WRITEUP
MBed OS 6.16.0 - Integer Overflow to Buffer Overflow in HCI Packet Processing
An issue was discovered in MBed OS 6.16.0. During processing of HCI packets, the software dynamically determines the length of the packet data by reading 2 bytes from the packet header. A buffer is then allocated to contain the entire packet, the size of which is calculated as the length of the packet body determined earlier plus the header length. WsfMsgAlloc then increments this again by sizeof(wsfMsg_t). This may cause an integer overflow that results in the buffer being significantly too small to contain the entire packet. This may cause a buffer overflow of up to 65 KB . This bug is trivial to exploit for a denial of service but can generally not be exploited further because the exploitable buffer is dynamically allocated.
CVSS 7.5
CVE-2024-48984 WRITEUP CRITICAL WRITEUP
MBed OS 6.16.0 - Buffer Overflow in HCI Event Report Parsing
An issue was discovered in MBed OS 6.16.0. When parsing hci reports, the hci parsing software dynamically determines the length of a list of reports by reading a byte from an input stream. It then fetches the length of the first report, uses it to calculate the beginning of the second report, etc. In doing this, it tracks the largest report so it can later allocate a buffer that fits every individual report (but only one at a time). It does not, however, validate that these addresses are all contained within the buffer passed to hciEvtProcessLeExtAdvReport. It is then possible, though unlikely, that the buffer designated to hold the reports is allocated in such a way that one of these out-of-bounds length fields is contained within the new buffer. When the (n-1)th report is copied, it overwrites the length field of the nth report. This now corrupted length field is then used for a memcpy into the new buffer, which may lead to a buffer overflow.
CVSS 9.8
CVE-2024-48985 WRITEUP HIGH WRITEUP
MBed OS 6.16.0 - Buffer Overflow via HCI Packet Processing
An issue was discovered in MBed OS 6.16.0. During processing of HCI packets, the software dynamically determines the length of the packet data by reading 2 bytes from the packet data. A buffer is then allocated to contain the entire packet, the size of which is calculated as the length of the packet body determined earlier and the header length. If the allocate fails because the specified packet is too large, no exception handling occurs and hciTrSerialRxIncoming continues to write bytes into the 4-byte large temporary header buffer, leading to a buffer overflow. This can be leveraged into an arbitrary write by an attacker. It is possible to overwrite the pointer to the buffer that is supposed to receive the contents of the packet body but which couldn't be allocated. One can then overwrite the state variable used by the function to determine which step of the parsing process is currently being executed. This advances the function to the next state, where it proceeds to copy data to that arbitrary location. The packet body is then written wherever the corrupted data pointer is pointing.
CVSS 7.5
CVE-2024-48986 WRITEUP HIGH WRITEUP
MBed OS 6.16.0 - Buffer Overflow in HCI Event Packet Parsing
An issue was discovered in MBed OS 6.16.0. Its hci parsing software dynamically determines the length of certain hci packets by reading a byte from its header. Certain events cause a callback, the logic for which allocates a buffer (the length of which is determined by looking up the event type in a table). The subsequent write operation, however, copies the amount of data specified in the packet header, which may lead to a buffer overflow. This bug is trivial to exploit for a denial of service but is not certain to suffice to bring the system down and can generally not be exploited further because the exploitable buffer is dynamically allocated.
CVSS 7.5