Luboslav Pivarc

12 exploits Active since Nov 2025
CVE-2025-64432 WRITEUP MEDIUM WRITEUP
KubeVirt < 1.5.3 and 1.6.0 - Improper Certificate Validation in mTLS Authentication
KubeVirt is a virtual machine management add-on for Kubernetes. Versions 1.5.3 and below, and 1.6.0 contained a flawed implementation of the Kubernetes aggregation layer's authentication flow which could enable bypass of RBAC controls. It was discovered that the virt-api component fails to correctly authenticate the client when receiving API requests over mTLS. In particular, it fails to validate the CN (Common Name) field in the received client TLS certificates against the set of allowed values defined in the extension-apiserver-authentication configmap. Failre to validate certain fields in the client TLS certificate may allow an attacker to bypass existing RBAC controls by directly communicating with the aggregated API server, impersonating the Kubernetes API server and its aggregator component. This issue is fixed in versions 1.5.3 and 1.6.1.
CVSS 4.7
CVE-2025-64433 WRITEUP MEDIUM WRITEUP
KubeVirt < 1.5.3 - Path Traversal and Arbitrary File Read via PVC Disk Mount
KubeVirt is a virtual machine management add-on for Kubernetes. Prior to 1.5.3 and 1.6.1, a vulnerability was discovered that allows a VM to read arbitrary files from the virt-launcher pod's file system. This issue stems from improper symlink handling when mounting PVC disks into a VM. Specifically, if a malicious user has full or partial control over the contents of a PVC, they can create a symbolic link that points to a file within the virt-launcher pod's file system. Since libvirt can treat regular files as block devices, any file on the pod's file system that is symlinked in this way can be mounted into the VM and subsequently read. Although a security mechanism exists where VMs are executed as an unprivileged user with UID 107 inside the virt-launcher container, limiting the scope of accessible resources, this restriction is bypassed due to a second vulnerability. The latter causes the ownership of any file intended for mounting to be changed to the unprivileged user with UID 107 prior to mounting. As a result, an attacker can gain access to and read arbitrary files located within the virt-launcher pod's file system or on a mounted PVC from within the guest VM. This vulnerability is fixed in 1.5.3 and 1.6.1.
CVSS 6.5
CVE-2025-64434 WRITEUP MEDIUM WRITEUP
kubevirt < 1.5.3 - Improper Authentication via Shared Credentials
KubeVirt is a virtual machine management add-on for Kubernetes. Prior to 1.5.3 and 1.6.1, due to the peer verification logic in virt-handler (via verifyPeerCert), an attacker who compromises a virt-handler instance, could exploit these shared credentials to impersonate virt-api and execute privileged operations against other virt-handler instances potentially compromising the integrity and availability of the VM managed by it. This vulnerability is fixed in 1.5.3 and 1.6.1.
CVSS 4.7
CVE-2025-64437 WRITEUP MEDIUM WRITEUP
KubeVirt < 1.5.3 and 1.6.1 - Symlink Attack via Launcher-Sock File
KubeVirt is a virtual machine management add-on for Kubernetes. In versions before 1.5.3 and 1.6.1, the virt-handler does not verify whether the launcher-sock is a symlink or a regular file. This oversight can be exploited, for example, to change the ownership of arbitrary files on the host node to the unprivileged user with UID 107 (the same user used by virt-launcher) thus, compromising the CIA (Confidentiality, Integrity and Availability) of data on the host. To successfully exploit this vulnerability, an attacker should be in control of the file system of the virt-launcher pod. This vulnerability is fixed in 1.5.3 and 1.6.1.
CVSS 5.0
CVE-2025-64432 WRITEUP MEDIUM WRITEUP
KubeVirt < 1.5.3 and 1.6.0 - Improper Certificate Validation in mTLS Authentication
KubeVirt is a virtual machine management add-on for Kubernetes. Versions 1.5.3 and below, and 1.6.0 contained a flawed implementation of the Kubernetes aggregation layer's authentication flow which could enable bypass of RBAC controls. It was discovered that the virt-api component fails to correctly authenticate the client when receiving API requests over mTLS. In particular, it fails to validate the CN (Common Name) field in the received client TLS certificates against the set of allowed values defined in the extension-apiserver-authentication configmap. Failre to validate certain fields in the client TLS certificate may allow an attacker to bypass existing RBAC controls by directly communicating with the aggregated API server, impersonating the Kubernetes API server and its aggregator component. This issue is fixed in versions 1.5.3 and 1.6.1.
CVSS 4.7
CVE-2025-64433 WRITEUP MEDIUM WRITEUP
KubeVirt < 1.5.3 - Path Traversal and Arbitrary File Read via PVC Disk Mount
KubeVirt is a virtual machine management add-on for Kubernetes. Prior to 1.5.3 and 1.6.1, a vulnerability was discovered that allows a VM to read arbitrary files from the virt-launcher pod's file system. This issue stems from improper symlink handling when mounting PVC disks into a VM. Specifically, if a malicious user has full or partial control over the contents of a PVC, they can create a symbolic link that points to a file within the virt-launcher pod's file system. Since libvirt can treat regular files as block devices, any file on the pod's file system that is symlinked in this way can be mounted into the VM and subsequently read. Although a security mechanism exists where VMs are executed as an unprivileged user with UID 107 inside the virt-launcher container, limiting the scope of accessible resources, this restriction is bypassed due to a second vulnerability. The latter causes the ownership of any file intended for mounting to be changed to the unprivileged user with UID 107 prior to mounting. As a result, an attacker can gain access to and read arbitrary files located within the virt-launcher pod's file system or on a mounted PVC from within the guest VM. This vulnerability is fixed in 1.5.3 and 1.6.1.
CVSS 6.5
CVE-2025-64434 WRITEUP MEDIUM WRITEUP
kubevirt < 1.5.3 - Improper Authentication via Shared Credentials
KubeVirt is a virtual machine management add-on for Kubernetes. Prior to 1.5.3 and 1.6.1, due to the peer verification logic in virt-handler (via verifyPeerCert), an attacker who compromises a virt-handler instance, could exploit these shared credentials to impersonate virt-api and execute privileged operations against other virt-handler instances potentially compromising the integrity and availability of the VM managed by it. This vulnerability is fixed in 1.5.3 and 1.6.1.
CVSS 4.7
CVE-2025-64437 WRITEUP MEDIUM WRITEUP
KubeVirt < 1.5.3 and 1.6.1 - Symlink Attack via Launcher-Sock File
KubeVirt is a virtual machine management add-on for Kubernetes. In versions before 1.5.3 and 1.6.1, the virt-handler does not verify whether the launcher-sock is a symlink or a regular file. This oversight can be exploited, for example, to change the ownership of arbitrary files on the host node to the unprivileged user with UID 107 (the same user used by virt-launcher) thus, compromising the CIA (Confidentiality, Integrity and Availability) of data on the host. To successfully exploit this vulnerability, an attacker should be in control of the file system of the virt-launcher pod. This vulnerability is fixed in 1.5.3 and 1.6.1.
CVSS 5.0
CVE-2025-64432 WRITEUP MEDIUM WRITEUP
KubeVirt < 1.5.3 and 1.6.0 - Improper Certificate Validation in mTLS Authentication
KubeVirt is a virtual machine management add-on for Kubernetes. Versions 1.5.3 and below, and 1.6.0 contained a flawed implementation of the Kubernetes aggregation layer's authentication flow which could enable bypass of RBAC controls. It was discovered that the virt-api component fails to correctly authenticate the client when receiving API requests over mTLS. In particular, it fails to validate the CN (Common Name) field in the received client TLS certificates against the set of allowed values defined in the extension-apiserver-authentication configmap. Failre to validate certain fields in the client TLS certificate may allow an attacker to bypass existing RBAC controls by directly communicating with the aggregated API server, impersonating the Kubernetes API server and its aggregator component. This issue is fixed in versions 1.5.3 and 1.6.1.
CVSS 4.7
CVE-2025-64433 WRITEUP MEDIUM WRITEUP
KubeVirt < 1.5.3 - Path Traversal and Arbitrary File Read via PVC Disk Mount
KubeVirt is a virtual machine management add-on for Kubernetes. Prior to 1.5.3 and 1.6.1, a vulnerability was discovered that allows a VM to read arbitrary files from the virt-launcher pod's file system. This issue stems from improper symlink handling when mounting PVC disks into a VM. Specifically, if a malicious user has full or partial control over the contents of a PVC, they can create a symbolic link that points to a file within the virt-launcher pod's file system. Since libvirt can treat regular files as block devices, any file on the pod's file system that is symlinked in this way can be mounted into the VM and subsequently read. Although a security mechanism exists where VMs are executed as an unprivileged user with UID 107 inside the virt-launcher container, limiting the scope of accessible resources, this restriction is bypassed due to a second vulnerability. The latter causes the ownership of any file intended for mounting to be changed to the unprivileged user with UID 107 prior to mounting. As a result, an attacker can gain access to and read arbitrary files located within the virt-launcher pod's file system or on a mounted PVC from within the guest VM. This vulnerability is fixed in 1.5.3 and 1.6.1.
CVSS 6.5
CVE-2025-64434 WRITEUP MEDIUM WRITEUP
kubevirt < 1.5.3 - Improper Authentication via Shared Credentials
KubeVirt is a virtual machine management add-on for Kubernetes. Prior to 1.5.3 and 1.6.1, due to the peer verification logic in virt-handler (via verifyPeerCert), an attacker who compromises a virt-handler instance, could exploit these shared credentials to impersonate virt-api and execute privileged operations against other virt-handler instances potentially compromising the integrity and availability of the VM managed by it. This vulnerability is fixed in 1.5.3 and 1.6.1.
CVSS 4.7
CVE-2025-64437 WRITEUP MEDIUM WRITEUP
KubeVirt < 1.5.3 and 1.6.1 - Symlink Attack via Launcher-Sock File
KubeVirt is a virtual machine management add-on for Kubernetes. In versions before 1.5.3 and 1.6.1, the virt-handler does not verify whether the launcher-sock is a symlink or a regular file. This oversight can be exploited, for example, to change the ownership of arbitrary files on the host node to the unprivileged user with UID 107 (the same user used by virt-launcher) thus, compromising the CIA (Confidentiality, Integrity and Availability) of data on the host. To successfully exploit this vulnerability, an attacker should be in control of the file system of the virt-launcher pod. This vulnerability is fixed in 1.5.3 and 1.6.1.
CVSS 5.0