Gitlab Exploits
479 exploits tracked across all sources.
Umbraco CMS < 8.5.4 - Authenticated Remote Code Execution via Install Package File Upload
Umbraco CMS 8.5.3 allows an authenticated file upload (and consequently Remote Code Execution) via the Install Package functionality.
by eLeN3Re
CVSS 6.5
Apache Tomcat 7.0.0-7.0.99, 8.5.0-8.5.50, 9.0.0.M1-9.0.0.30 - Remote Code Execution via AJP File Read and JSP Processing
When using the Apache JServ Protocol (AJP), care must be taken when trusting incoming connections to Apache Tomcat. Tomcat treats AJP connections as having higher trust than, for example, a similar HTTP connection. If such connections are available to an attacker, they can be exploited in ways that may be surprising. In Apache Tomcat 9.0.0.M1 to 9.0.0.30, 8.5.0 to 8.5.50 and 7.0.0 to 7.0.99, Tomcat shipped with an AJP Connector enabled by default that listened on all configured IP addresses. It was expected (and recommended in the security guide) that this Connector would be disabled if not required. This vulnerability report identified a mechanism that allowed: - returning arbitrary files from anywhere in the web application - processing any file in the web application as a JSP Further, if the web application allowed file upload and stored those files within the web application (or the attacker was able to control the content of the web application by some other means) then this, along with the ability to process a file as a JSP, made remote code execution possible. It is important to note that mitigation is only required if an AJP port is accessible to untrusted users. Users wishing to take a defence-in-depth approach and block the vector that permits returning arbitrary files and execution as JSP may upgrade to Apache Tomcat 9.0.31, 8.5.51 or 7.0.100 or later. A number of changes were made to the default AJP Connector configuration in 9.0.31 to harden the default configuration. It is likely that users upgrading to 9.0.31, 8.5.51 or 7.0.100 or later will need to make small changes to their configurations.
by CaptCrypto
CVSS 9.8
Windows 10 and Windows Server - Certificate Spoofing via ECC Certificate Validation
A spoofing vulnerability exists in the way Windows CryptoAPI (Crypt32.dll) validates Elliptic Curve Cryptography (ECC) certificates.An attacker could exploit the vulnerability by using a spoofed code-signing certificate to sign a malicious executable, making it appear the file was from a trusted, legitimate source, aka 'Windows CryptoAPI Spoofing Vulnerability'.
by gavz
CVSS 8.1
Windows 10 1903/1909 and Windows Server 1903/1909 - Remote Code Execution via SMBv3 Compression Buffer Overflow
A remote code execution vulnerability exists in the way that the Microsoft Server Message Block 3.1.1 (SMBv3) protocol handles certain requests, aka 'Windows SMBv3 Client/Server Remote Code Execution Vulnerability'.
by gavz
CVSS 10.0
Rapid7 Metasploit < 5.0.85 - OS Command Injection via libnotify Hostname or Service Name
Rapid7 Metasploit Framework versions before 5.0.85 suffers from an instance of CWE-78: OS Command Injection, wherein the libnotify plugin accepts untrusted user-supplied data via a remote computer's hostname or service name. An attacker can create a specially-crafted hostname or service name to be imported by Metasploit from a variety of sources and trigger a command injection on the operator's terminal. Note, only the Metasploit Framework and products that expose the plugin system is susceptible to this issue -- notably, this does not include Rapid7 Metasploit Pro. Also note, this vulnerability cannot be triggered through a normal scan operation -- the attacker would have to supply a file that is processed with the db_import command.
by pastaoficial
CVSS 6.1
Zoho ManageEngine Service Plus <11.1.11112 - Info Disclosure
Zoho ManageEngine Service Plus before 11.1 build 11112 allows low-privilege authenticated users to discover the File Protection password via a getFileProtectionSettings call to AjaxServlet.
by eLeN3Re
CVSS 6.5
ManageEngine ServiceDesk Plus < 11.1 build 11115 - Unauthenticated Agent Installation Status Manipulation
Zoho ManageEngine ServiceDesk Plus before 11.1 build 11115 allows remote unauthenticated attackers to change the installation status of deployed agents.
by eLeN3Re
CVSS 7.5
TP-Link Archer C50 V3 - Denial of Service via Crafted HTTP Referer Header
TP-Link Archer C50 V3 devices before Build 200318 Rel. 62209 allows remote attackers to cause a denial of service via a crafted HTTP Header containing an unexpected Referer field.
by takertao
CVSS 7.5
Windows Server 2012, 2016, 2019 - Unauthenticated Remote Code Execution via RD Gateway
A remote code execution vulnerability exists in Windows Remote Desktop Gateway (RD Gateway) when an unauthenticated attacker connects to the target system using RDP and sends specially crafted requests, aka 'Windows Remote Desktop Gateway (RD Gateway) Remote Code Execution Vulnerability'. This CVE ID is unique from CVE-2020-0610.
by ind3p3nd3nt
CVSS 9.8
Rails <5.2.4.3-6.0.3.1 - Deserialization
A deserialization of untrusted data vulnernerability exists in rails < 5.2.4.3, rails < 6.0.3.1 that can allow an attacker to unmarshal user-provided objects in MemCacheStore and RedisCacheStore potentially resulting in an RCE.
by gonzoyumo
CVSS 9.8
Netlogon Weak Cryptographic Authentication
An elevation of privilege vulnerability exists when an attacker establishes a vulnerable Netlogon secure channel connection to a domain controller, using the Netlogon Remote Protocol (MS-NRPC). An attacker who successfully exploited the vulnerability could run a specially crafted application on a device on the network.
To exploit the vulnerability, an unauthenticated attacker would be required to use MS-NRPC to connect to a domain controller to obtain domain administrator access.
Microsoft is addressing the vulnerability in a phased two-part rollout. These updates address the vulnerability by modifying how Netlogon handles the usage of Netlogon secure channels.
For guidelines on how to manage the changes required for this vulnerability and more information on the phased rollout, see How to manage the changes in Netlogon secure channel connections associated with CVE-2020-1472 (updated September 28, 2020).
When the second phase of Windows updates become available in Q1 2021, customers will be notified via a revision to this security vulnerability. If you wish to be notified when these updates are released, we recommend that you register for the security notifications mailer to be alerted of content changes to this advisory. See Microsoft Technical Security Notifications.
by NdFeB
CVSS 5.5
Zoho ManageEngine Apps Mgr <14780 - RCE
Zoho ManageEngine Applications Manager 14780 and before allows a remote unauthenticated attacker to register managed servers via AAMRequestProcessor servlet.
by eLeN3Re
CVSS 7.5
Windows 10 1903/1909 and Windows Server 1903/1909 - Remote Code Execution via SMBv3 Compression Buffer Overflow
A remote code execution vulnerability exists in the way that the Microsoft Server Message Block 3.1.1 (SMBv3) protocol handles certain requests, aka 'Windows SMBv3 Client/Server Remote Code Execution Vulnerability'.
by darthploit
CVSS 10.0
Netlogon Weak Cryptographic Authentication
An elevation of privilege vulnerability exists when an attacker establishes a vulnerable Netlogon secure channel connection to a domain controller, using the Netlogon Remote Protocol (MS-NRPC). An attacker who successfully exploited the vulnerability could run a specially crafted application on a device on the network.
To exploit the vulnerability, an unauthenticated attacker would be required to use MS-NRPC to connect to a domain controller to obtain domain administrator access.
Microsoft is addressing the vulnerability in a phased two-part rollout. These updates address the vulnerability by modifying how Netlogon handles the usage of Netlogon secure channels.
For guidelines on how to manage the changes required for this vulnerability and more information on the phased rollout, see How to manage the changes in Netlogon secure channel connections associated with CVE-2020-1472 (updated September 28, 2020).
When the second phase of Windows updates become available in Q1 2021, customers will be notified via a revision to this security vulnerability. If you wish to be notified when these updates are released, we recommend that you register for the security notifications mailer to be alerted of content changes to this advisory. See Microsoft Technical Security Notifications.
by darthploit
CVSS 5.5
Windows 10 1903/1909 and Windows Server 1903/1909 - Remote Code Execution via SMBv3 Compression Buffer Overflow
A remote code execution vulnerability exists in the way that the Microsoft Server Message Block 3.1.1 (SMBv3) protocol handles certain requests, aka 'Windows SMBv3 Client/Server Remote Code Execution Vulnerability'.
by darthploit
CVSS 10.0
Kubernetes API Server - Traffic Interception via Service externalIPs
Kubernetes API server in all versions allow an attacker who is able to create a ClusterIP service and set the spec.externalIPs field, to intercept traffic to that IP address. Additionally, an attacker who is able to patch the status (which is considered a privileged operation and should not typically be granted to users) of a LoadBalancer service can set the status.loadBalancer.ingress.ip to similar effect.
by mike-ensor
CVSS 6.3
fs.com S3900 24T4S < 1.7.0 - Cross-Site Request Forgery
An issue was discovered in fs.com S3900 24T4S 1.7.0 and earlier. The form does not have an authentication or token authentication mechanism that allows remote attackers to forge requests on behalf of a site administrator to change all settings including deleting users, creating new users with escalated privileges.
by M0NsTeRRR
CVSS 8.8
Netlogon Weak Cryptographic Authentication
An elevation of privilege vulnerability exists when an attacker establishes a vulnerable Netlogon secure channel connection to a domain controller, using the Netlogon Remote Protocol (MS-NRPC). An attacker who successfully exploited the vulnerability could run a specially crafted application on a device on the network.
To exploit the vulnerability, an unauthenticated attacker would be required to use MS-NRPC to connect to a domain controller to obtain domain administrator access.
Microsoft is addressing the vulnerability in a phased two-part rollout. These updates address the vulnerability by modifying how Netlogon handles the usage of Netlogon secure channels.
For guidelines on how to manage the changes required for this vulnerability and more information on the phased rollout, see How to manage the changes in Netlogon secure channel connections associated with CVE-2020-1472 (updated September 28, 2020).
When the second phase of Windows updates become available in Q1 2021, customers will be notified via a revision to this security vulnerability. If you wish to be notified when these updates are released, we recommend that you register for the security notifications mailer to be alerted of content changes to this advisory. See Microsoft Technical Security Notifications.
by null-p4n
CVSS 5.5
BIND 9.5.0-9.11.27, 9.12.0-9.16.11, 9.17.0-9.17.1 - Buffer Overflow via GSS-TSIG Configuration
BIND servers are vulnerable if they are running an affected version and are configured to use GSS-TSIG features. In a configuration which uses BIND's default settings the vulnerable code path is not exposed, but a server can be rendered vulnerable by explicitly setting valid values for the tkey-gssapi-keytab or tkey-gssapi-credentialconfiguration options. Although the default configuration is not vulnerable, GSS-TSIG is frequently used in networks where BIND is integrated with Samba, as well as in mixed-server environments that combine BIND servers with Active Directory domain controllers. The most likely outcome of a successful exploitation of the vulnerability is a crash of the named process. However, remote code execution, while unproven, is theoretically possible. Affects: BIND 9.5.0 -> 9.11.27, 9.12.0 -> 9.16.11, and versions BIND 9.11.3-S1 -> 9.11.27-S1 and 9.16.8-S1 -> 9.16.11-S1 of BIND Supported Preview Edition. Also release versions 9.17.0 -> 9.17.1 of the BIND 9.17 development branch
by aouadjaout
CVSS 8.1
BIG-IP 11.6.1-11.6.5.1 - Remote Code Execution via TMUI Undisclosed Pages
In BIG-IP versions 15.0.0-15.1.0.3, 14.1.0-14.1.2.5, 13.1.0-13.1.3.3, 12.1.0-12.1.5.1, and 11.6.1-11.6.5.1, the Traffic Management User Interface (TMUI), also referred to as the Configuration utility, has a Remote Code Execution (RCE) vulnerability in undisclosed pages.
by yingweizhao
CVSS 9.8
Windows 10 1903/1909 and Windows Server 1903/1909 - Remote Code Execution via SMBv3 Compression Buffer Overflow
A remote code execution vulnerability exists in the way that the Microsoft Server Message Block 3.1.1 (SMBv3) protocol handles certain requests, aka 'Windows SMBv3 Client/Server Remote Code Execution Vulnerability'.
by vanlam2001
CVSS 10.0
Tiki 16.3-21.1 - Authentication Bypass via Excessive Login Attempts
tiki-login.php in Tiki before 21.2 sets the admin password to a blank value after 50 invalid login attempts.
by securitystuffbackup
CVSS 9.8
Android 8.0-9 - Local Information Disclosure via Unsafe PendingIntent in BeamTransferManager
In updateNotification of BeamTransferManager.java, there is a possible permission bypass due to an unsafe PendingIntent. This could lead to local information disclosure with User execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-9 Android-8.0 Android-8.1Android ID: A-159060474
by nanopathi
CVSS 5.5
Linux Kernel < 5.10.0 - UDP Port Scan via ICMP Packet Source Port Prediction
A flaw in ICMP packets in the Linux kernel may allow an attacker to quickly scan open UDP ports. This flaw allows an off-path remote attacker to effectively bypass source port UDP randomization. Software that relies on UDP source port randomization are indirectly affected as well on the Linux Based Products (RUGGEDCOM RM1224: All versions between v5.0 and v6.4, SCALANCE M-800: All versions between v5.0 and v6.4, SCALANCE S615: All versions between v5.0 and v6.4, SCALANCE SC-600: All versions prior to v2.1.3, SCALANCE W1750D: v8.3.0.1, v8.6.0, and v8.7.0, SIMATIC Cloud Connect 7: All versions, SIMATIC MV500 Family: All versions, SIMATIC NET CP 1243-1 (incl. SIPLUS variants): Versions 3.1.39 and later, SIMATIC NET CP 1243-7 LTE EU: Version
by nanopathi
CVSS 7.4
Android - Out-of-bounds Read in Bluetooth SDP Server
In sdp_server_handle_client_req of sdp_server.cc, there is a possible out of bounds read due to a missing bounds check. This could lead to remote information disclosure from the bluetooth server with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-10 Android-11 Android-8.0 Android-8.1 Android-9Android ID: A-169342531
by nanopathi
CVSS 7.5
By Source