Nomisec Exploits
21,119 exploits tracked across all sources.
Rack::Session::Cookie secrets: decrypt failure fallback enables secretless session forgery and Marshal deserialization
Rack::Session is a session management implementation for Rack. From 2.0.0 to before 2.1.2, Rack::Session::Cookie incorrectly handles decryption failures when configured with secrets:. If cookie decryption fails, the implementation falls back to a default decoder instead of rejecting the cookie. This allows an unauthenticated attacker to supply a crafted session cookie that is accepted as valid session data without knowledge of any configured secret. Because this mechanism is used to load session state, an attacker can manipulate session contents and potentially gain unauthorized access. This vulnerability is fixed in 2.1.2.
by sm1ee
CVSS 9.8
Paessler Prtg Network Monitor < 18.2.39 - OS Command Injection
An issue was discovered in PRTG Network Monitor before 18.2.39. An attacker who has access to the PRTG System Administrator web console with administrative privileges can exploit an OS command injection vulnerability (both on the server and on devices) by sending malformed parameters in sensor or notification management scenarios.
by AC8999
CVSS 7.2
EAR vulnerability in Progress ShareFile Storage Zones Controller (SZC)
Customer Managed ShareFile Storage Zones Controller (SZC) allows an unauthenticated attacker to access restricted configuration pages. This leads to changing system configuration and potential remote code execution.
by 0xBlackash
CVSS 9.8
Ietf HTTP < 1.57.0 - Denial of Service
The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023.
by TLevente20
CVSS 7.5
Google Chrome < 146.0.7680.178 - Use After Free
Use after free in Dawn in Google Chrome prior to 146.0.7680.178 allowed a remote attacker who had compromised the renderer process to execute arbitrary code via a crafted HTML page. (Chromium security severity: High)
by TheMalwareGuardian
Twonky Server Log Leak Authentication Bypass
Twonky Server 8.5.2 on Linux and Windows is vulnerable to an access control flaw. An unauthenticated attacker can bypass web service API authentication controls to leak a log file and read the administrator's username and encrypted password.
by 0xBlackash
CVSS 9.8
Under Some Conditions Spring Security HTTP Headers Are not Written
When applications specify HTTP response headers for servlet applications using Spring Security, there is the possibility that the HTTP Headers will not be written.
This issue affects Spring Security Servlet applications using lazy (default) writing of HTTP Headers:
: from 5.7.0 through 5.7.21, from 5.8.0 through 5.8.23, from 6.3.0 through 6.3.14, from 6.4.0 through 6.4.14, from 6.5.0 through 6.5.8, from 7.0.0 through 7.0.3.
by semgrep
CVSS 9.1
Rarlab Winrar < 7.13 - Path Traversal
A path traversal vulnerability affecting the Windows version of WinRAR allows the attackers to execute arbitrary code by crafting malicious archive files. This vulnerability was exploited in the wild and was discovered by Anton Cherepanov, Peter Košinár, and Peter Strýček
from ESET.
by shaheeryasirofficial
CVSS 8.8
Gravity Forms <= 2.9.30 - Reflected Cross-Site Scripting via 'form_ids' Parameter
The Gravity Forms plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the `form_ids` parameter in the `gform_get_config` AJAX action in all versions up to, and including, 2.9.30. This is due to the `GFCommon::send_json()` method outputting JSON-encoded data wrapped in HTML comment delimiters using `echo` and `wp_die()`, which serves the response with a `Content-Type: text/html` header instead of `application/json`. The `wp_json_encode()` function does not HTML-encode angle brackets within JSON string values, allowing injected HTML/script tags in `form_ids` array values to be parsed and executed by the browser. The required `config_nonce` is generated with `wp_create_nonce('gform_config_ajax')` and is publicly embedded on every page that renders a Gravity Forms form, making it identical for all unauthenticated visitors within the same 12-hour nonce tick. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. This vulnerability cannot be exploited against users who are authenticated on the target system, but could be used to alter the target page.
by Hann1bl3L3ct3r
CVSS 4.7
Laravel Reverb <1.6.3 - RCE
Laravel Reverb provides a real-time WebSocket communication backend for Laravel applications. In versions 1.6.3 and below, Reverb passes data from the Redis channel directly into PHP’s unserialize() function without restricting which classes can be instantiated, which leaves users vulnerable to Remote Code Execution. The exploitability of this vulnerability is increased because Redis servers are commonly deployed without authentication, but only affects Laravel Reverb when horizontal scaling is enabled (REVERB_SCALING_ENABLED=true). This issue has been fixed in version 1.7.0. As a workaround, require a strong password for Redis access and ensure the service is only accessible via a private network or local loopback, and/or set REVERB_SCALING_ENABLED=false to bypass the vulnerable logic entirely (if the environment uses only one Reverb node).
by rockmelodies
CVSS 9.8
Openssl < 3.0.19 - Out-of-Bounds Write
Issue summary: Parsing CMS AuthEnvelopedData or EnvelopedData message with
maliciously crafted AEAD parameters can trigger a stack buffer overflow.
Impact summary: A stack buffer overflow may lead to a crash, causing Denial
of Service, or potentially remote code execution.
When parsing CMS (Auth)EnvelopedData structures that use AEAD ciphers such as
AES-GCM, the IV (Initialization Vector) encoded in the ASN.1 parameters is
copied into a fixed-size stack buffer without verifying that its length fits
the destination. An attacker can supply a crafted CMS message with an
oversized IV, causing a stack-based out-of-bounds write before any
authentication or tag verification occurs.
Applications and services that parse untrusted CMS or PKCS#7 content using
AEAD ciphers (e.g., S/MIME (Auth)EnvelopedData with AES-GCM) are vulnerable.
Because the overflow occurs prior to authentication, no valid key material
is required to trigger it. While exploitability to remote code execution
depends on platform and toolchain mitigations, the stack-based write
primitive represents a severe risk.
The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this
issue, as the CMS implementation is outside the OpenSSL FIPS module
boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3 and 3.0 are vulnerable to this issue.
OpenSSL 1.1.1 and 1.0.2 are not affected by this issue.
by WostGit
CVSS 8.8
Windows Notepad App - Command Injection
Improper neutralization of special elements used in a command ('command injection') in Windows Notepad App allows an unauthorized attacker to execute code locally.
by whiskeylab
CVSS 7.8
Amelia <= 2.1.3 - Insecure Direct Object Reference to Authenticated (Employee+) Privilege Escalation via 'externalId' Parameter
The Booking for Appointments and Events Calendar – Amelia plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 2.1.3. This is due to the `UpdateProviderCommandHandler` failing to validate changes to the `externalId` field when a Provider (Employee) user updates their own profile. The `externalId` maps directly to a WordPress user ID and is passed to `wp_set_password()` and `wp_update_user()` without authorization checks. This makes it possible for authenticated attackers, with Provider-level (Employee) access and above, to take over any WordPress account — including Administrator — by injecting an arbitrary `externalId` value when updating their own provider profile.
by kaleth4
CVSS 8.8
fontTools <4.60.2 - RCE
fontTools is a library for manipulating fonts, written in Python. In versions from 4.33.0 to before 4.60.2, the fonttools varLib (or python3 -m fontTools.varLib) script has an arbitrary file write vulnerability that leads to remote code execution when a malicious .designspace file is processed. The vulnerability affects the main() code path of fontTools.varLib, used by the fonttools varLib CLI and any code that invokes fontTools.varLib.main(). This issue has been patched in version 4.60.2.
by jwsly12
CVSS 6.3
Apache Geode < 7.0.100 - Remote Code Execution
When using the Apache JServ Protocol (AJP), care must be taken when trusting incoming connections to Apache Tomcat. Tomcat treats AJP connections as having higher trust than, for example, a similar HTTP connection. If such connections are available to an attacker, they can be exploited in ways that may be surprising. In Apache Tomcat 9.0.0.M1 to 9.0.0.30, 8.5.0 to 8.5.50 and 7.0.0 to 7.0.99, Tomcat shipped with an AJP Connector enabled by default that listened on all configured IP addresses. It was expected (and recommended in the security guide) that this Connector would be disabled if not required. This vulnerability report identified a mechanism that allowed: - returning arbitrary files from anywhere in the web application - processing any file in the web application as a JSP Further, if the web application allowed file upload and stored those files within the web application (or the attacker was able to control the content of the web application by some other means) then this, along with the ability to process a file as a JSP, made remote code execution possible. It is important to note that mitigation is only required if an AJP port is accessible to untrusted users. Users wishing to take a defence-in-depth approach and block the vector that permits returning arbitrary files and execution as JSP may upgrade to Apache Tomcat 9.0.31, 8.5.51 or 7.0.100 or later. A number of changes were made to the default AJP Connector configuration in 9.0.31 to harden the default configuration. It is likely that users upgrading to 9.0.31, 8.5.51 or 7.0.100 or later will need to make small changes to their configurations.
by With-fate
CVSS 9.8
lodash vulnerable to Code Injection via `_.template` imports key names
Impact:
The fix for CVE-2021-23337 (https://github.com/advisories/GHSA-35jh-r3h4-6jhm) added validation for the variable option in _.template but did not apply the same validation to options.imports key names. Both paths flow into the same Function() constructor sink.
When an application passes untrusted input as options.imports key names, an attacker can inject default-parameter expressions that execute arbitrary code at template compilation time.
Additionally, _.template uses assignInWith to merge imports, which enumerates inherited properties via for..in. If Object.prototype has been polluted by any other vector, the polluted keys are copied into the imports object and passed to Function().
Patches:
Users should upgrade to version 4.18.0.
Workarounds:
Do not pass untrusted input as key names in options.imports. Only use developer-controlled, static key names.
by SvenLie
CVSS 8.1
Samsung Mobile/Wearable Processor - Buffer Overflow
An issue was discovered in Samsung Mobile Processor and Wearable Processor Exynos 980, 990, 850, 1080, 2100, 1280, 2200, 1330, 1380, 1480, 2400, W920, W930, W1000. The lack of a length check leads to out-of-bounds writes via malformed USB packets to the target.
by Creeeeger
CVSS 7.5
Windmill <1.603.3 - Path Traversal
Windmill is an open-source developer platform for internal code: APIs, background jobs, workflows and UIs. Prior to version 1.603.3, an unauthenticated path traversal vulnerability exists in Windmill's get_log_file endpoint "(/api/w/{workspace}/jobs_u/get_log_file/{filename})". The filename parameter is concatenated into a file path without sanitization, allowing an attacker to read arbitrary files on the server using ../ sequences. This issue has been patched in version 1.603.3.
by Chocapikk
Docker Desktop - Privilege Escalation
A vulnerability was identified in Docker Desktop that allows local running Linux containers to access the Docker Engine API via the configured Docker subnet, at 192.168.65.7:2375 by default. This vulnerability occurs with or without Enhanced Container Isolation (ECI) enabled, and with or without the "Expose daemon on tcp://localhost:2375 without TLS" option enabled.
This can lead to execution of a wide range of privileged commands to the engine API, including controlling other containers, creating new ones, managing images etc. In some circumstances (e.g. Docker Desktop for Windows with WSL backend) it also allows mounting the host drive with the same privileges as the user running Docker Desktop.
by chernandez321
Vsftpd - OS Command Injection
vsftpd 2.3.4 downloaded between 20110630 and 20110703 contains a backdoor which opens a shell on port 6200/tcp.
by RinAliyeva
CVSS 9.8
NocoBase Affected by Sandbox Escape to RCE via console._stdout Prototype Chain Traversal in Workflow Script Node
NocoBase is an AI-powered no-code/low-code platform for building business applications and enterprise solutions. Prior to version 2.0.28, NocoBase's Workflow Script Node executes user-supplied JavaScript inside a Node.js vm sandbox with a custom require allowlist (controlled by WORKFLOW_SCRIPT_MODULES env var). However, the console object passed into the sandbox context exposes host-realm WritableWorkerStdio stream objects via console._stdout and console._stderr. An authenticated attacker can traverse the prototype chain to escape the sandbox and achieve Remote Code Execution as root. This issue has been patched in version 2.0.28.
by franckboumendil
CVSS 9.9
Git - Info Disclosure
Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals. When reading a config value, Git strips any trailing carriage return and line feed (CRLF). When writing a config entry, values with a trailing CR are not quoted, causing the CR to be lost when the config is later read. When initializing a submodule, if the submodule path contains a trailing CR, the altered path is read resulting in the submodule being checked out to an incorrect location. If a symlink exists that points the altered path to the submodule hooks directory, and the submodule contains an executable post-checkout hook, the script may be unintentionally executed after checkout. This vulnerability is fixed in v2.43.7, v2.44.4, v2.45.4, v2.46.4, v2.47.3, v2.48.2, v2.49.1, and v2.50.1.
by sathish46-lab
CVSS 8.0
Node.js <8.2 - DoS
Node.js v4.0 through v4.8.3, all versions of v5.x, v6.0 through v6.11.0, v7.0 through v7.10.0, and v8.0 through v8.1.3 was susceptible to hash flooding remote DoS attacks as the HashTable seed was constant across a given released version of Node.js. This was a result of building with V8 snapshots enabled by default which caused the initially randomized seed to be overwritten on startup.
by dajneem23
CVSS 7.5
Cisco FMC - Deserialization
A vulnerability in the web-based management interface of Cisco Secure Firewall Management Center (FMC) Software could allow an unauthenticated, remote attacker to execute arbitrary Java code as root on an affected device.
This vulnerability is due to insecure deserialization of a user-supplied Java byte stream. An attacker could exploit this vulnerability by sending a crafted serialized Java object to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary code on the device and elevate privileges to root.
Note: If the FMC management interface does not have public internet access, the attack surface that is associated with this vulnerability is reduced.
by Hassan-Pouladi
CVSS 10.0
PJSIP <2.16 - Buffer Overflow
PJSIP is a free and open source multimedia communication library written in C. In 2.16 and earlier, a buffer overflow vulnerability exists in PJNATH ICE Session when processing credentials with excessively long usernames.
by VABISMO
By Source