Nomisec Exploits
21,376 exploits tracked across all sources.
Linux PAM - Privilege Escalation
A Local Privilege Escalation (LPE) vulnerability has been discovered in pam-config within Linux Pluggable Authentication Modules (PAM). This flaw allows an unprivileged local attacker (for example, a user logged in via SSH) to obtain the elevated privileges normally reserved for a physically present, "allow_active" user. The highest risk is that the attacker can then perform all allow_active yes Polkit actions, which are typically restricted to console users, potentially gaining unauthorized control over system configurations, services, or other sensitive operations.
by iamgithubber
Sudo < 1.9.17 - Incorrect Authorization
Sudo before 1.9.17p1, when used with a sudoers file that specifies a host that is neither the current host nor ALL, allows listed users to execute commands on unintended machines.
by CryingN
Voltronic Power ViewPower <1.04-21353 & PowerShield Netguard <1.04-...
Voltronic Power ViewPower through 1.04-21353 and PowerShield Netguard before 1.04-23292 allows a remote attacker to configure the system via an unspecified web interface. An unauthenticated remote attacker can make changes to the system including: changing the web interface admin password, view/change system configuration, enumerate connected UPS devices and shut down connected UPS devices. This extends to being able to configure operating system commands that should run if the system detects a connected UPS shutting down.
by ready2disclose
CVSS 9.8
Voltronic Power ViewPower <1.04-24215, ViewPower Pro <2.0-22165, Po...
Voltronic Power ViewPower through 1.04-24215, ViewPower Pro through 2.0-22165, and PowerShield Netguard before 1.04-23292 allows a remote attacker to run arbitrary code via an unspecified web interface related to detection of a managed UPS shutting down. An unauthenticated attacker can use this to run arbitrary code immediately regardless of any managed UPS state or presence.
by ready2disclose
CVSS 10.0
RARLAB WinRAR - RCE
RARLAB WinRAR Directory Traversal Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of RARLAB WinRAR. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the handling of file paths within archive files. A crafted file path can cause the process to traverse to unintended directories. An attacker can leverage this vulnerability to execute code in the context of the current user. Was ZDI-CAN-27198.
by mulwareX
Sudo <1.9.17p1 - Privilege Escalation
Sudo before 1.9.17p1 allows local users to obtain root access because /etc/nsswitch.conf from a user-controlled directory is used with the --chroot option.
by Mikivirus0
Cisco ISE - RCE
A vulnerability in a specific API of Cisco ISE and Cisco ISE-PIC could allow an unauthenticated, remote attacker to execute arbitrary code on the underlying operating system as root. The attacker does not require any valid credentials to exploit this vulnerability.
This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by submitting a crafted API request. A successful exploit could allow the attacker to obtain root privileges on an affected device.
by grupooruss
Log4Shell HTTP Header Injection
Apache Log4j2 2.0-beta9 through 2.15.0 (excluding security releases 2.12.2, 2.12.3, and 2.3.1) JNDI features used in configuration, log messages, and parameters do not protect against attacker controlled LDAP and other JNDI related endpoints. An attacker who can control log messages or log message parameters can execute arbitrary code loaded from LDAP servers when message lookup substitution is enabled. From log4j 2.15.0, this behavior has been disabled by default. From version 2.16.0 (along with 2.12.2, 2.12.3, and 2.3.1), this functionality has been completely removed. Note that this vulnerability is specific to log4j-core and does not affect log4net, log4cxx, or other Apache Logging Services projects.
by axisops
CVSS 10.0
Wing FTP Server NULL-byte Authentication Bypass (CVE-2025-47812)
In Wing FTP Server before 7.4.4. the user and admin web interfaces mishandle '\0' bytes, ultimately allowing injection of arbitrary Lua code into user session files. This can be used to execute arbitrary system commands with the privileges of the FTP service (root or SYSTEM by default). This is thus a remote code execution vulnerability that guarantees a total server compromise. This is also exploitable via anonymous FTP accounts.
by 0xgh057r3c0n
Apache 2.4.49/2.4.50 Traversal RCE
A flaw was found in a change made to path normalization in Apache HTTP Server 2.4.49. An attacker could use a path traversal attack to map URLs to files outside the directories configured by Alias-like directives. If files outside of these directories are not protected by the usual default configuration "require all denied", these requests can succeed. If CGI scripts are also enabled for these aliased pathes, this could allow for remote code execution. This issue is known to be exploited in the wild. This issue only affects Apache 2.4.49 and not earlier versions. The fix in Apache HTTP Server 2.4.50 was found to be incomplete, see CVE-2021-42013.
by blu3ming
CVSS 9.8
Google Chrome < 137.0.7151.68 - Out-of-Bounds Write
Out of bounds read and write in V8 in Google Chrome prior to 137.0.7151.68 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High)
by itsShotgun
Sudo <1.9.17p1 - Privilege Escalation
Sudo before 1.9.17p1 allows local users to obtain root access because /etc/nsswitch.conf from a user-controlled directory is used with the --chroot option.
by robbert1978
CVSS 9.3
Sudo <1.9.17p1 - Privilege Escalation
Sudo before 1.9.17p1 allows local users to obtain root access because /etc/nsswitch.conf from a user-controlled directory is used with the --chroot option.
by zhaduchanhzz
CVSS 9.3
Opal Estate Pro - Property Management and Submission <=1.7.5 - Privilege Escalation
The Opal Estate Pro – Property Management and Submission plugin for WordPress, used by the FullHouse - Real Estate Responsive WordPress Theme, is vulnerable to privilege escalation via in all versions up to, and including, 1.7.5. This is due to a lack of role restriction during registration in the 'on_regiser_user' function. This makes it possible for unauthenticated attackers to arbitrarily choose the role, including the Administrator role, assigned when registering.
by MrjHaxcore
Microsoft 365 Apps - Use After Free
Use after free in Microsoft Office PowerPoint allows an unauthorized attacker to execute code locally.
by mbanyamer
Cacti 1.2.22 unauthenticated command injection
Cacti is an open source platform which provides a robust and extensible operational monitoring and fault management framework for users. In affected versions a command injection vulnerability allows an unauthenticated user to execute arbitrary code on a server running Cacti, if a specific data source was selected for any monitored device. The vulnerability resides in the `remote_agent.php` file. This file can be accessed without authentication. This function retrieves the IP address of the client via `get_client_addr` and resolves this IP address to the corresponding hostname via `gethostbyaddr`. After this, it is verified that an entry within the `poller` table exists, where the hostname corresponds to the resolved hostname. If such an entry was found, the function returns `true` and the client is authorized. This authorization can be bypassed due to the implementation of the `get_client_addr` function. The function is defined in the file `lib/functions.php` and checks serval `$_SERVER` variables to determine the IP address of the client. The variables beginning with `HTTP_` can be arbitrarily set by an attacker. Since there is a default entry in the `poller` table with the hostname of the server running Cacti, an attacker can bypass the authentication e.g. by providing the header `Forwarded-For: <TARGETIP>`. This way the function `get_client_addr` returns the IP address of the server running Cacti. The following call to `gethostbyaddr` will resolve this IP address to the hostname of the server, which will pass the `poller` hostname check because of the default entry. After the authorization of the `remote_agent.php` file is bypassed, an attacker can trigger different actions. One of these actions is called `polldata`. The called function `poll_for_data` retrieves a few request parameters and loads the corresponding `poller_item` entries from the database. If the `action` of a `poller_item` equals `POLLER_ACTION_SCRIPT_PHP`, the function `proc_open` is used to execute a PHP script. The attacker-controlled parameter `$poller_id` is retrieved via the function `get_nfilter_request_var`, which allows arbitrary strings. This variable is later inserted into the string passed to `proc_open`, which leads to a command injection vulnerability. By e.g. providing the `poller_id=;id` the `id` command is executed. In order to reach the vulnerable call, the attacker must provide a `host_id` and `local_data_id`, where the `action` of the corresponding `poller_item` is set to `POLLER_ACTION_SCRIPT_PHP`. Both of these ids (`host_id` and `local_data_id`) can easily be bruteforced. The only requirement is that a `poller_item` with an `POLLER_ACTION_SCRIPT_PHP` action exists. This is very likely on a productive instance because this action is added by some predefined templates like `Device - Uptime` or `Device - Polling Time`.
This command injection vulnerability allows an unauthenticated user to execute arbitrary commands if a `poller_item` with the `action` type `POLLER_ACTION_SCRIPT_PHP` (`2`) is configured. The authorization bypass should be prevented by not allowing an attacker to make `get_client_addr` (file `lib/functions.php`) return an arbitrary IP address. This could be done by not honoring the `HTTP_...` `$_SERVER` variables. If these should be kept for compatibility reasons it should at least be prevented to fake the IP address of the server running Cacti. This vulnerability has been addressed in both the 1.2.x and 1.3.x release branches with `1.2.23` being the first release containing the patch.
by alv-david
CVSS 9.8
Linux kernel - Use After Free
In the Linux kernel, the following vulnerability has been resolved:
sunrpc: handle SVC_GARBAGE during svc auth processing as auth error
tianshuo han reported a remotely-triggerable crash if the client sends a
kernel RPC server a specially crafted packet. If decoding the RPC reply
fails in such a way that SVC_GARBAGE is returned without setting the
rq_accept_statp pointer, then that pointer can be dereferenced and a
value stored there.
If it's the first time the thread has processed an RPC, then that
pointer will be set to NULL and the kernel will crash. In other cases,
it could create a memory scribble.
The server sunrpc code treats a SVC_GARBAGE return from svc_authenticate
or pg_authenticate as if it should send a GARBAGE_ARGS reply. RFC 5531
says that if authentication fails that the RPC should be rejected
instead with a status of AUTH_ERR.
Handle a SVC_GARBAGE return as an AUTH_ERROR, with a reason of
AUTH_BADCRED instead of returning GARBAGE_ARGS in that case. This
sidesteps the whole problem of touching the rpc_accept_statp pointer in
this situation and avoids the crash.
by keymaker-arch
Sudo <1.9.17p1 - Privilege Escalation
Sudo before 1.9.17p1 allows local users to obtain root access because /etc/nsswitch.conf from a user-controlled directory is used with the --chroot option.
by neko205-mx
CVSS 9.3
Angularjs - XSS
All versions of the package angular; all versions of the package angularjs.core; all versions of the package angularjs are vulnerable to Cross-site Scripting (XSS) due to insecure page caching in the Internet Explorer browser, which allows interpolation of <textarea> elements.
by neverendingsupport
Sudo <1.9.17p1 - Privilege Escalation
Sudo before 1.9.17p1 allows local users to obtain root access because /etc/nsswitch.conf from a user-controlled directory is used with the --chroot option.
by kh4sh3i
Fortinet Fortiproxy < 7.0.14 - Format String Vulnerability
A use of externally-controlled format string in Fortinet FortiOS versions 7.4.0 through 7.4.2, 7.2.0 through 7.2.6, 7.0.0 through 7.0.13, FortiProxy versions 7.4.0 through 7.4.2, 7.2.0 through 7.2.8, 7.0.0 through 7.0.14, FortiPAM versions 1.2.0, 1.1.0 through 1.1.2, 1.0.0 through 1.0.3, FortiSwitchManager versions 7.2.0 through 7.2.3, 7.0.0 through 7.0.3 allows attacker to execute unauthorized code or commands via specially crafted packets.
by MAVRICK-1
OTRS <6.0.1-4.0.26 - Command Injection
In OTRS 6.0.x up to and including 6.0.1, OTRS 5.0.x up to and including 5.0.24, and OTRS 4.0.x up to and including 4.0.26, an attacker who is logged into OTRS as an agent can manipulate form parameters (related to PGP) and execute arbitrary shell commands with the permissions of the OTRS or web server user.
by Smarttfoxx
CVSS 8.8
Google Chrome <128.0.6613.113 - Buffer Overflow
Heap buffer overflow in Skia in Google Chrome prior to 128.0.6613.113 allowed a remote attacker who had compromised the renderer process to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High)
by HyHy100
CVSS 8.8
Google Chrome <128.0.6613.113 - Buffer Overflow
Heap buffer overflow in Skia in Google Chrome prior to 128.0.6613.113 allowed a remote attacker who had compromised the renderer process to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High)
by HyHy100
CVSS 8.8
Google Chrome < 128.0.6613.84 - Memory Corruption
Out of bounds memory access in Skia in Google Chrome prior to 128.0.6613.84 allowed a remote attacker who had compromised the renderer process to perform out of bounds memory access via a crafted HTML page. (Chromium security severity: High)
by HyHy100
CVSS 8.8
By Source