Nomisec Exploits
22,664 exploits tracked across all sources.
OpenSMTPD 6.6 - Remote Code Execution via MAIL FROM Field
smtp_mailaddr in smtp_session.c in OpenSMTPD 6.6, as used in OpenBSD 6.6 and other products, allows remote attackers to execute arbitrary commands as root via a crafted SMTP session, as demonstrated by shell metacharacters in a MAIL FROM field. This affects the "uncommented" default configuration. The issue exists because of an incorrect return value upon failure of input validation.
by minhluannguyen
xml-crypto 4.0.0-5.9.9 - Improper Verification of Cryptographic Signature via KeyInfo Element
xml-crypto is an xml digital signature and encryption library for Node.js. In affected versions the default configuration does not check authorization of the signer, it only checks the validity of the signature per section 3.2.2 of the w3 xmldsig-core-20080610 spec. As such, without additional validation steps, the default configuration allows a malicious actor to re-sign an XML document, place the certificate in a `<KeyInfo />` element, and pass `xml-crypto` default validation checks. As a result `xml-crypto` trusts by default any certificate provided via digitally signed XML document's `<KeyInfo />`. `xml-crypto` prefers to use any certificate provided via digitally signed XML document's `<KeyInfo />` even if library was configured to use specific certificate (`publicCert`) for signature verification purposes. An attacker can spoof signature verification by modifying XML document and replacing existing signature with signature generated with malicious private key (created by attacker) and by attaching that private key's certificate to `<KeyInfo />` element. This vulnerability is combination of changes introduced to `4.0.0` on pull request 301 / commit `c2b83f98` and has been addressed in version 6.0.0 with pull request 445 / commit `21201723d`. Users are advised to upgrade. Users unable to upgrade may either check the certificate extracted via `getCertFromKeyInfo` against trusted certificates before accepting the results of the validation or set `xml-crypto's getCertFromKeyInfo` to `() => undefined` forcing `xml-crypto` to use an explicitly configured `publicCert` or `privateKey` for signature verification.
by absholi7ly
CVSS 10.0
File Away < 3.9.9.0.1 - Unauthenticated Arbitrary File Upload via upload() Function
The File Away plugin for WordPress is vulnerable to arbitrary file uploads due to a missing capability check and missing file type validation in the upload() function in all versions up to, and including, 3.9.9.0.1. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected site's server which may make remote code execution possible.
by whattheslime
CVSS 9.8
Windows File Explorer - Exposure of Sensitive Information to an Unauthorized Actor
Exposure of sensitive information to an unauthorized actor in Windows File Explorer allows an unauthorized attacker to perform spoofing over a network.
by aleongx
CVSS 6.5
Apache 2.4.49/2.4.50 Traversal RCE
A flaw was found in a change made to path normalization in Apache HTTP Server 2.4.49. An attacker could use a path traversal attack to map URLs to files outside the directories configured by Alias-like directives. If files outside of these directories are not protected by the usual default configuration "require all denied", these requests can succeed. If CGI scripts are also enabled for these aliased pathes, this could allow for remote code execution. This issue is known to be exploited in the wild. This issue only affects Apache 2.4.49 and not earlier versions. The fix in Apache HTTP Server 2.4.50 was found to be incomplete, see CVE-2021-42013.
by javaamo
CVSS 9.8
Tenda AC9 v1.0 V15.03.05.14_multi - Stack Overflow via wanMTU Parameter
In Tenda AC9 v1.0 V15.03.05.14_multi, the wanMTU parameter of /goform/AdvSetMacMtuWan has a stack overflow vulnerability, which can lead to remote arbitrary code execution.
by Otsmane-Ahmed
Tomcat Partial PUT Java Deserialization
Path Equivalence: 'file.Name' (Internal Dot) leading to Remote Code Execution and/or Information disclosure and/or malicious content added to uploaded files via write enabled Default Servlet in Apache Tomcat.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.2, from 10.1.0-M1 through 10.1.34, from 9.0.0.M1 through 9.0.98.
The following versions were EOL at the time the CVE was created but are
known to be affected: 8.5.0 though 8.5.100. Other, older, EOL versions
may also be affected.
If all of the following were true, a malicious user was able to view security sensitive files and/or inject content into those files:
- writes enabled for the default servlet (disabled by default)
- support for partial PUT (enabled by default)
- a target URL for security sensitive uploads that was a sub-directory of a target URL for public uploads
- attacker knowledge of the names of security sensitive files being uploaded
- the security sensitive files also being uploaded via partial PUT
If all of the following were true, a malicious user was able to perform remote code execution:
- writes enabled for the default servlet (disabled by default)
- support for partial PUT (enabled by default)
- application was using Tomcat's file based session persistence with the default storage location
- application included a library that may be leveraged in a deserialization attack
Users are recommended to upgrade to version 11.0.3, 10.1.35 or 9.0.99, which fixes the issue.
by michael-david-fry
CVSS 9.8
ImageMagick 7.0.11-13-7.1.1-36 - Uncontrolled Search Path Element via MAGICK_CONFIGURE_PATH and LD_LIBRARY_PATH
ImageMagick is a free and open-source software suite, used for editing and manipulating digital images. The `AppImage` version `ImageMagick` might use an empty path when setting `MAGICK_CONFIGURE_PATH` and `LD_LIBRARY_PATH` environment variables while executing, which might lead to arbitrary code execution by loading malicious configuration files or shared libraries in the current working directory while executing `ImageMagick`. The vulnerability is fixed in 7.11-36.
by Dxsk
tj-actions changed-files < 46 - Unauthenticated Secret Exposure via Malicious Commit
tj-actions changed-files before 46 allows remote attackers to discover secrets by reading actions logs. (The tags v1 through v45.0.7 were affected on 2025-03-14 and 2025-03-15 because they were modified by a threat actor to point at commit 0e58ed8, which contained malicious updateFeatures code.)
by Checkmarx
Koha < 24.11.02 - SQL Injection via lateissues-export.pl supplierid or serialid Parameter
GetLateOrMissingIssues in C4/Serials.pm in Koha before 24.11.02 allows SQL Injection in /serials/lateissues-export.pl via the supplierid or serialid parameter.
by RandomRobbieBF
GibbonEdu Gibbon <25.0.1 - Arbitrary File Write
GibbonEdu Gibbon version 25.0.1 and before allows Arbitrary File Write because rubrics_visualise_saveAjax.phps does not require authentication. The endpoint accepts the img, path, and gibbonPersonID parameters. The img parameter is expected to be a base64 encoded image. If the path parameter is set, the defined path is used as the destination folder, concatenated with the absolute path of the installation directory. The content of the img parameter is base64 decoded and written to the defined file path. This allows creation of PHP files that permit Remote Code Execution (unauthenticated).
by dgoorden
CVSS 9.8
Exim 4.98 - Remote SQL Injection via SQLite Hints and ETRN Serialization
Exim 4.98 before 4.98.1, when SQLite hints and ETRN serialization are used, allows remote SQL injection. (Resolving SQL injection requires an update to 4.99.1 in certain non-default rate-limit configurations.)
by OscarBataille
Redis 6.2.0-6.2.16 - Authenticated Remote Code Execution via Lua Script Garbage Collector Manipulation
Redis is an open source, in-memory database that persists on disk. An authenticated user may use a specially crafted Lua script to manipulate the garbage collector and potentially lead to remote code execution. The problem is fixed in 7.4.2, 7.2.7, and 6.2.17. An additional workaround to mitigate the problem without patching the redis-server executable is to prevent users from executing Lua scripts. This can be done using ACL to restrict EVAL and EVALSHA commands.
by publicqi
Redis 6.2.0-6.2.16 - Authenticated Remote Code Execution via Lua Script Garbage Collector Manipulation
Redis is an open source, in-memory database that persists on disk. An authenticated user may use a specially crafted Lua script to manipulate the garbage collector and potentially lead to remote code execution. The problem is fixed in 7.4.2, 7.2.7, and 6.2.17. An additional workaround to mitigate the problem without patching the redis-server executable is to prevent users from executing Lua scripts. This can be done using ACL to restrict EVAL and EVALSHA commands.
by xsshk
CVSS 7.0
Drupal Drupalgeddon 2 Forms API Property Injection
Drupal before 7.58, 8.x before 8.3.9, 8.4.x before 8.4.6, and 8.5.x before 8.5.1 allows remote attackers to execute arbitrary code because of an issue affecting multiple subsystems with default or common module configurations.
by tpdlshdmlrkfmcla
CVSS 9.8
WordPress LiteSpeed Cache - Unauthenticated Privilege Escalation to Admin
Incorrect Privilege Assignment vulnerability in LiteSpeed Technologies LiteSpeed Cache litespeed-cache.This issue affects LiteSpeed Cache: from n/a through <= 6.3.0.1.
by JohnDoeAnonITA
Linux Kernel - Use After Free
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Fix use-after-free bugs caused by sco_sock_timeout
When the sco connection is established and then, the sco socket
is releasing, timeout_work will be scheduled to judge whether
the sco disconnection is timeout. The sock will be deallocated
later, but it is dereferenced again in sco_sock_timeout. As a
result, the use-after-free bugs will happen. The root cause is
shown below:
Cleanup Thread | Worker Thread
sco_sock_release |
sco_sock_close |
__sco_sock_close |
sco_sock_set_timer |
schedule_delayed_work |
sco_sock_kill | (wait a time)
sock_put(sk) //FREE | sco_sock_timeout
| sock_hold(sk) //USE
The KASAN report triggered by POC is shown below:
[ 95.890016] ==================================================================
[ 95.890496] BUG: KASAN: slab-use-after-free in sco_sock_timeout+0x5e/0x1c0
[ 95.890755] Write of size 4 at addr ffff88800c388080 by task kworker/0:0/7
...
[ 95.890755] Workqueue: events sco_sock_timeout
[ 95.890755] Call Trace:
[ 95.890755] <TASK>
[ 95.890755] dump_stack_lvl+0x45/0x110
[ 95.890755] print_address_description+0x78/0x390
[ 95.890755] print_report+0x11b/0x250
[ 95.890755] ? __virt_addr_valid+0xbe/0xf0
[ 95.890755] ? sco_sock_timeout+0x5e/0x1c0
[ 95.890755] kasan_report+0x139/0x170
[ 95.890755] ? update_load_avg+0xe5/0x9f0
[ 95.890755] ? sco_sock_timeout+0x5e/0x1c0
[ 95.890755] kasan_check_range+0x2c3/0x2e0
[ 95.890755] sco_sock_timeout+0x5e/0x1c0
[ 95.890755] process_one_work+0x561/0xc50
[ 95.890755] worker_thread+0xab2/0x13c0
[ 95.890755] ? pr_cont_work+0x490/0x490
[ 95.890755] kthread+0x279/0x300
[ 95.890755] ? pr_cont_work+0x490/0x490
[ 95.890755] ? kthread_blkcg+0xa0/0xa0
[ 95.890755] ret_from_fork+0x34/0x60
[ 95.890755] ? kthread_blkcg+0xa0/0xa0
[ 95.890755] ret_from_fork_asm+0x11/0x20
[ 95.890755] </TASK>
[ 95.890755]
[ 95.890755] Allocated by task 506:
[ 95.890755] kasan_save_track+0x3f/0x70
[ 95.890755] __kasan_kmalloc+0x86/0x90
[ 95.890755] __kmalloc+0x17f/0x360
[ 95.890755] sk_prot_alloc+0xe1/0x1a0
[ 95.890755] sk_alloc+0x31/0x4e0
[ 95.890755] bt_sock_alloc+0x2b/0x2a0
[ 95.890755] sco_sock_create+0xad/0x320
[ 95.890755] bt_sock_create+0x145/0x320
[ 95.890755] __sock_create+0x2e1/0x650
[ 95.890755] __sys_socket+0xd0/0x280
[ 95.890755] __x64_sys_socket+0x75/0x80
[ 95.890755] do_syscall_64+0xc4/0x1b0
[ 95.890755] entry_SYSCALL_64_after_hwframe+0x67/0x6f
[ 95.890755]
[ 95.890755] Freed by task 506:
[ 95.890755] kasan_save_track+0x3f/0x70
[ 95.890755] kasan_save_free_info+0x40/0x50
[ 95.890755] poison_slab_object+0x118/0x180
[ 95.890755] __kasan_slab_free+0x12/0x30
[ 95.890755] kfree+0xb2/0x240
[ 95.890755] __sk_destruct+0x317/0x410
[ 95.890755] sco_sock_release+0x232/0x280
[ 95.890755] sock_close+0xb2/0x210
[ 95.890755] __fput+0x37f/0x770
[ 95.890755] task_work_run+0x1ae/0x210
[ 95.890755] get_signal+0xe17/0xf70
[ 95.890755] arch_do_signal_or_restart+0x3f/0x520
[ 95.890755] syscall_exit_to_user_mode+0x55/0x120
[ 95.890755] do_syscall_64+0xd1/0x1b0
[ 95.890755] entry_SYSCALL_64_after_hwframe+0x67/0x6f
[ 95.890755]
[ 95.890755] The buggy address belongs to the object at ffff88800c388000
[ 95.890755] which belongs to the cache kmalloc-1k of size 1024
[ 95.890755] The buggy address is located 128 bytes inside of
[ 95.890755] freed 1024-byte region [ffff88800c388000, ffff88800c388400)
[ 95.890755]
[ 95.890755] The buggy address belongs to the physical page:
[ 95.890755] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88800c38a800 pfn:0xc388
[ 95.890755] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 95.890755] ano
---truncated---
by secunnix
HUSKY Products Filter Professional for WooCommerce <= 1.3.6.5 - Local File Inclusion via 'template'
The HUSKY – Products Filter Professional for WooCommerce plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 1.3.6.5 via the 'template' parameter of the woof_text_search AJAX action. This makes it possible for unauthenticated attackers to include and execute arbitrary files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where images and other “safe” file types can be uploaded and included.
by shahwarshah
CVSS 9.8
HUSKY Products Filter Professional for WooCommerce <= 1.3.6.5 - Local File Inclusion via 'template'
The HUSKY – Products Filter Professional for WooCommerce plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 1.3.6.5 via the 'template' parameter of the woof_text_search AJAX action. This makes it possible for unauthenticated attackers to include and execute arbitrary files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where images and other “safe” file types can be uploaded and included.
by MuhammadWaseem29
CVSS 9.8
Windows File Explorer - Exposure of Sensitive Information to an Unauthorized Actor
Exposure of sensitive information to an unauthorized actor in Windows File Explorer allows an unauthorized attacker to perform spoofing over a network.
by FOLKS-iwd
pwndoc < 1.2.0 - Authenticated Path Traversal and Remote Code Execution via Backup Restore
PwnDoc is a penetration test reporting application. Prior to version 1.2.0, the backup restore functionality is vulnerable to path traversal in the TAR entry's name, allowing an attacker to overwrite any file on the system with their content. By overwriting an included `.js` file and restarting the container, this allows for Remote Code Execution as an administrator. The remote code execution occurs because any user with the `backups:create` and `backups:update` (only administrators by default) is able to overwrite any file on the system. Version 1.2.0 fixes the issue.
by shreyas-malhotra
CVSS 6.5
iPadOS < 16.7 and iPhone OS < 16.7 - Certificate Validation Bypass
A certificate validation issue was addressed. This issue is fixed in macOS Ventura 13.6, iOS 16.7 and iPadOS 16.7. A malicious app may be able to bypass signature validation. Apple is aware of a report that this issue may have been actively exploited against versions of iOS before iOS 16.7.
by dmytrozykov
CVSS 5.5
GitLab 16.0-16.8.1 Path Traversal & Arbitrary File Write via Workspace
An issue has been discovered in GitLab CE/EE affecting all versions from 16.0 prior to 16.6.6, 16.7 prior to 16.7.4, and 16.8 prior to 16.8.1 which allows an authenticated user to write files to arbitrary locations on the GitLab server while creating a workspace.
by doyensec
Tomcat Partial PUT Java Deserialization
Path Equivalence: 'file.Name' (Internal Dot) leading to Remote Code Execution and/or Information disclosure and/or malicious content added to uploaded files via write enabled Default Servlet in Apache Tomcat.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.2, from 10.1.0-M1 through 10.1.34, from 9.0.0.M1 through 9.0.98.
The following versions were EOL at the time the CVE was created but are
known to be affected: 8.5.0 though 8.5.100. Other, older, EOL versions
may also be affected.
If all of the following were true, a malicious user was able to view security sensitive files and/or inject content into those files:
- writes enabled for the default servlet (disabled by default)
- support for partial PUT (enabled by default)
- a target URL for security sensitive uploads that was a sub-directory of a target URL for public uploads
- attacker knowledge of the names of security sensitive files being uploaded
- the security sensitive files also being uploaded via partial PUT
If all of the following were true, a malicious user was able to perform remote code execution:
- writes enabled for the default servlet (disabled by default)
- support for partial PUT (enabled by default)
- application was using Tomcat's file based session persistence with the default storage location
- application included a library that may be leveraged in a deserialization attack
Users are recommended to upgrade to version 11.0.3, 10.1.35 or 9.0.99, which fixes the issue.
by msadeghkarimi
Android 13 - Unauthenticated Local Information Disclosure via DataUsageList.java
In multiple methods of DataUsageList.java, there is a possible way to learn about admin user's network activities due to a missing permission check. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-13Android ID: A-262741858
by vesu-nights
CVSS 5.5
By Source