Writeup Exploits
46,637 exploits tracked across all sources.
Stack Buffer Overflow in wolfSSL PKCS7 wc_PKCS7_DecryptOri() via Oversized OID
A stack buffer overflow exists in wolfSSL's PKCS7 implementation in the wc_PKCS7_DecryptOri() function in wolfcrypt/src/pkcs7.c. When processing a CMS EnvelopedData message containing an OtherRecipientInfo (ORI) recipient, the function copies an ASN.1-parsed OID into a fixed 32-byte stack buffer (oriOID[MAX_OID_SZ]) via XMEMCPY without first validating that the parsed OID length does not exceed MAX_OID_SZ. A crafted CMS EnvelopedData message with an ORI recipient containing an OID longer than 32 bytes triggers a stack buffer overflow. Exploitation requires the library to be built with --enable-pkcs7 (disabled by default) and the application to have registered an ORI decrypt callback via wc_PKCS7_SetOriDecryptCb().
URI nameConstraints not enforced in ConfirmNameConstraints()
URI nameConstraints from constrained intermediate CAs are parsed but not enforced during certificate chain verification in wolfcrypt/src/asn.c. A compromised or malicious sub-CA could issue leaf certificates with URI SAN entries that violate the nameConstraints of the issuing CA, and wolfSSL would accept them as valid.
wolfSSL ECDSA Certificate Verification
Missing hash/digest size and OID checks allow digests smaller than allowed when verifying ECDSA certificates, or smaller than is appropriate for the relevant key type, to be accepted by signature verification functions. This could lead to reduced security of ECDSA certificate-based authentication if the public CA key used is also known. This affects ECDSA/ECC verification when EdDSA or ML-DSA is also enabled.
CVSS 9.1
Heap Out-of-Bounds Write in DecodeObjectId() in wolfSSL
Two potential heap out-of-bounds write locations existed in DecodeObjectId() in wolfcrypt/src/asn.c. First, a bounds check only validates one available slot before writing two OID arc values (out[0] and out[1]), enabling a 2-byte out-of-bounds write when outSz equals 1. Second, multiple callers pass sizeof(decOid) (64 bytes on 64-bit platforms) instead of the element count MAX_OID_SZ (32), causing the function to accept crafted OIDs with 33 or more arcs that write past the end of the allocated buffer.
CVSS 9.8
Wolfssl < 5.6.2 - Improper Certificate Validation
If a TLS 1.3 client gets neither a PSK (pre shared key) extension nor a KSE (key share extension) when connecting to a malicious server, a default predictable buffer gets used for the IKM (Input Keying Material) value when generating the session master secret. Using a potentially known IKM value when generating the session master secret key compromises the key generated, allowing an eavesdropper to reconstruct it and potentially allowing access to or meddling with message contents in the session. This issue does not affect client validation of connected servers, nor expose private key information, but could result in an insecure TLS 1.3 session when not controlling both sides of the connection. wolfSSL recommends that TLS 1.3 client side users update the version of wolfSSL used.
CVSS 9.1
Wolfssl < 5.5.0 - Improper Authorization
An issue was discovered in wolfSSL before 5.5.0. A fault injection attack on RAM via Rowhammer leads to ECDSA key disclosure. Users performing signing operations with private ECC keys, such as in server-side TLS connections, might leak faulty ECC signatures. These signatures can be processed via an advanced technique for ECDSA key recovery. (In 5.5.0 and later, WOLFSSL_CHECK_SIG_FAULTS can be used to address the vulnerability.)
CVSS 5.3
Wolfssl < 5.5.2 - Out-of-Bounds Read
In wolfSSL before 5.5.2, if callback functions are enabled (via the WOLFSSL_CALLBACKS flag), then a malicious TLS 1.3 client or network attacker can trigger a buffer over-read on the heap of 5 bytes. (WOLFSSL_CALLBACKS is only intended for debugging.)
CVSS 9.1
Wolfssl < 5.5.2 - Out-of-Bounds Read
In wolfSSL before 5.5.2, if callback functions are enabled (via the WOLFSSL_CALLBACKS flag), then a malicious TLS 1.3 client or network attacker can trigger a buffer over-read on the heap of 5 bytes. (WOLFSSL_CALLBACKS is only intended for debugging.)
CVSS 9.1
Wolfssl < 5.5.1 - Out-of-Bounds Write
In wolfSSL before 5.5.1, malicious clients can cause a buffer overflow during a TLS 1.3 handshake. This occurs when an attacker supposedly resumes a previous TLS session. During the resumption Client Hello a Hello Retry Request must be triggered. Both Client Hellos are required to contain a list of duplicate cipher suites to trigger the buffer overflow. In total, two Client Hellos have to be sent: one in the resumed session, and a second one as a response to a Hello Retry Request message.
CVSS 7.5
wolfSSL <5.5.0 - DoS
An issue was discovered in wolfSSL before 5.5.0 (when --enable-session-ticket is used); however, only version 5.3.0 is exploitable. Man-in-the-middle attackers or a malicious server can crash TLS 1.2 clients during a handshake. If an attacker injects a large ticket (more than 256 bytes) into a NewSessionTicket message in a TLS 1.2 handshake, and the client has a non-empty session cache, the session cache frees a pointer that points to unallocated memory, causing the client to crash with a "free(): invalid pointer" message. NOTE: It is likely that this is also exploitable during TLS 1.3 handshakes between a client and a malicious server. With TLS 1.3, it is not possible to exploit this as a man-in-the-middle.
CVSS 5.9
wolfSSL <5.5.0 - DoS
An issue was discovered in wolfSSL before 5.5.0 (when --enable-session-ticket is used); however, only version 5.3.0 is exploitable. Man-in-the-middle attackers or a malicious server can crash TLS 1.2 clients during a handshake. If an attacker injects a large ticket (more than 256 bytes) into a NewSessionTicket message in a TLS 1.2 handshake, and the client has a non-empty session cache, the session cache frees a pointer that points to unallocated memory, causing the client to crash with a "free(): invalid pointer" message. NOTE: It is likely that this is also exploitable during TLS 1.3 handshakes between a client and a malicious server. With TLS 1.3, it is not possible to exploit this as a man-in-the-middle.
CVSS 5.9
wolfSSL <5.5.0 - Use After Free
An issue was discovered in wolfSSL before 5.5.0. When a TLS 1.3 client connects to a wolfSSL server and SSL_clear is called on its session, the server crashes with a segmentation fault. This occurs in the second session, which is created through TLS session resumption and reuses the initial struct WOLFSSL. If the server reuses the previous session structure (struct WOLFSSL) by calling wolfSSL_clear(WOLFSSL* ssl) on it, the next received Client Hello (that resumes the previous session) crashes the server. Note that this bug is only triggered when resuming sessions using TLS session resumption. Only servers that use wolfSSL_clear instead of the recommended SSL_free; SSL_new sequence are affected. Furthermore, wolfSSL_clear is part of wolfSSL's compatibility layer and is not enabled by default. It is not part of wolfSSL's native API.
CVSS 7.5
wolfSSL <5.5.0 - Use After Free
An issue was discovered in wolfSSL before 5.5.0. When a TLS 1.3 client connects to a wolfSSL server and SSL_clear is called on its session, the server crashes with a segmentation fault. This occurs in the second session, which is created through TLS session resumption and reuses the initial struct WOLFSSL. If the server reuses the previous session structure (struct WOLFSSL) by calling wolfSSL_clear(WOLFSSL* ssl) on it, the next received Client Hello (that resumes the previous session) crashes the server. Note that this bug is only triggered when resuming sessions using TLS session resumption. Only servers that use wolfSSL_clear instead of the recommended SSL_free; SSL_new sequence are affected. Furthermore, wolfSSL_clear is part of wolfSSL's compatibility layer and is not enabled by default. It is not part of wolfSSL's native API.
CVSS 7.5
Wolfssl < 5.4.0 - Denial of Service
wolfSSL before 5.4.0 allows remote attackers to cause a denial of service via DTLS because a check for return-routability can be skipped.
CVSS 7.5
Wolfssl < 5.2.0 - Improper Certificate Validation
In wolfSSL before 5.2.0, a TLS 1.3 server cannot properly enforce a requirement for mutual authentication. A client can simply omit the certificate_verify message from the handshake, and never present a certificate.
CVSS 7.5
Wolfssl < 5.2.0 - Improper Certificate Validation
In wolfSSL before 5.2.0, certificate validation may be bypassed during attempted authentication by a TLS 1.3 client to a TLS 1.3 server. This occurs when the sig_algo field differs between the certificate_verify message and the certificate message.
CVSS 6.5
wolfSSL <5.1.1 - Info Disclosure
wolfSSL 5.x before 5.1.1 uses non-random IV values in certain situations. This affects connections (without AEAD) using AES-CBC or DES3 with TLS 1.1 or 1.2 or DTLS 1.1 or 1.2. This occurs because of misplaced memory initialization in BuildMessage in internal.c.
CVSS 9.1
Wolfssl < 5.0.0 - Infinite Loop
wolfSSL through 5.0.0 allows an attacker to cause a denial of service and infinite loop in the client component by sending crafted traffic from a Machine-in-the-Middle (MITM) position. The root cause is that the client module accepts TLS messages that normally are only sent to TLS servers.
CVSS 5.9
wolfSSL <4.8.0 - Info Disclosure
wolfSSL 4.6.x through 4.7.x before 4.8.0 does not produce a failure outcome when the serial number in an OCSP request differs from the serial number in the OCSP response.
CVSS 9.8
wolfSSL <4.8.0 - Info Disclosure
wolfSSL 4.6.x through 4.7.x before 4.8.0 does not produce a failure outcome when the serial number in an OCSP request differs from the serial number in the OCSP response.
CVSS 9.8
Wolfssl < 4.7.0 - Improper Certificate Validation
DoTls13CertificateVerify in tls13.c in wolfSSL before 4.7.0 does not cease processing for certain anomalous peer behavior (sending an ED22519, ED448, ECC, or RSA signature without the corresponding certificate). The client side is affected because man-in-the-middle attackers can impersonate TLS 1.3 servers.
CVSS 8.1
Wolfssl < 4.6.0 - Information Disclosure
In wolfSSL through 4.6.0, a side-channel vulnerability in base64 PEM file decoding allows system-level (administrator) attackers to obtain information about secret RSA keys via a controlled-channel and side-channel attack on software running in isolated environments that can be single stepped, especially Intel SGX.
CVSS 4.9
Wolfssl < 4.6.0 - Out-of-Bounds Write
RsaPad_PSS in wolfcrypt/src/rsa.c in wolfSSL before 4.6.0 has an out-of-bounds write for certain relationships between key size and digest size.
CVSS 9.8
Wolfssl < 4.6.0 - Out-of-Bounds Write
RsaPad_PSS in wolfcrypt/src/rsa.c in wolfSSL before 4.6.0 has an out-of-bounds write for certain relationships between key size and digest size.
CVSS 9.8
Wolfssl < 4.6.0 - Out-of-Bounds Write
RsaPad_PSS in wolfcrypt/src/rsa.c in wolfSSL before 4.6.0 has an out-of-bounds write for certain relationships between key size and digest size.
CVSS 9.8
By Source