Nomisec Exploits
21,750 exploits tracked across all sources.
Joomla! < 4.2.8 - Improper Access Control
An issue was discovered in Joomla! 4.0.0 through 4.2.7. An improper access check allows unauthorized access to webservice endpoints.
by mariovata
CVSS 5.3
Openplcproject Openplc V3 Firmware - Code Injection
Command Injection in Open PLC Webserver v3 allows remote attackers to execute arbitrary code via the "Hardware Layer Code Box" component on the "/hardware" page of the application.
by mind2hex
CVSS 8.8
IOBit Unlocker 1.1.2 - Privilege Escalation
The driver in IOBit Unlocker 1.1.2 allows a low-privileged user to unlock a file and kill processes (even ones running as SYSTEM) that hold a handle, via IOCTL code 0x222124.
by Aterror2be
Palo Alto Networks PAN-OS Unauthenticated Remote Code Execution
A command injection as a result of arbitrary file creation vulnerability in the GlobalProtect feature of Palo Alto Networks PAN-OS software for specific PAN-OS versions and distinct feature configurations may enable an unauthenticated attacker to execute arbitrary code with root privileges on the firewall.
Cloud NGFW, Panorama appliances, and Prisma Access are not impacted by this vulnerability.
by MrR0b0t19
CVSS 10.0
Cmsmadesimple Cms Made Simple - OS Command Injection
Remote code execution vulnerability in /cmsms-2.1.6-install.php/index.php in CMS Made Simple version 2.1.6 allows remote attackers to inject arbitrary PHP code via the "timezone" parameter in step 4 of a fresh installation procedure.
by b1d0ws
Palo Alto Networks PAN-OS Unauthenticated Remote Code Execution
A command injection as a result of arbitrary file creation vulnerability in the GlobalProtect feature of Palo Alto Networks PAN-OS software for specific PAN-OS versions and distinct feature configurations may enable an unauthenticated attacker to execute arbitrary code with root privileges on the firewall.
Cloud NGFW, Panorama appliances, and Prisma Access are not impacted by this vulnerability.
by momika233
Linux Kernel < 4.19.312 - Integer Overflow
In the Linux kernel, the following vulnerability has been resolved:
amdkfd: use calloc instead of kzalloc to avoid integer overflow
This uses calloc instead of doing the multiplication which might
overflow.
by MaherAzzouzi
Node.js HTTP/2 - DoS
An attacker can make the Node.js HTTP/2 server completely unavailable by sending a small amount of HTTP/2 frames packets with a few HTTP/2 frames inside. It is possible to leave some data in nghttp2 memory after reset when headers with HTTP/2 CONTINUATION frame are sent to the server and then a TCP connection is abruptly closed by the client triggering the Http2Session destructor while header frames are still being processed (and stored in memory) causing a race condition.
by lirantal
Cpanel < 11.102.0.31 - XSS
An issue was discovered in cPanel before 11.109.9999.116. XSS can occur on the cpsrvd error page via an invalid webcall ID, aka SEC-669. The fixed versions are 11.109.9999.116, 11.108.0.13, 11.106.0.18, and 11.102.0.31.
by some-man1
CVSS 5.3
Rust <1.77.2 - Command Injection
Rust is a programming language. The Rust Security Response WG was notified that the Rust standard library prior to version 1.77.2 did not properly escape arguments when invoking batch files (with the `bat` and `cmd` extensions) on Windows using the `Command`. An attacker able to control the arguments passed to the spawned process could execute arbitrary shell commands by bypassing the escaping. The severity of this vulnerability is critical for those who invoke batch files on Windows with untrusted arguments. No other platform or use is affected.
The `Command::arg` and `Command::args` APIs state in their documentation that the arguments will be passed to the spawned process as-is, regardless of the content of the arguments, and will not be evaluated by a shell. This means it should be safe to pass untrusted input as an argument.
On Windows, the implementation of this is more complex than other platforms, because the Windows API only provides a single string containing all the arguments to the spawned process, and it's up to the spawned process to split them. Most programs use the standard C run-time argv, which in practice results in a mostly consistent way arguments are splitted.
One exception though is `cmd.exe` (used among other things to execute batch files), which has its own argument splitting logic. That forces the standard library to implement custom escaping for arguments passed to batch files. Unfortunately it was reported that our escaping logic was not thorough enough, and it was possible to pass malicious arguments that would result in arbitrary shell execution.
Due to the complexity of `cmd.exe`, we didn't identify a solution that would correctly escape arguments in all cases. To maintain our API guarantees, we improved the robustness of the escaping code, and changed the `Command` API to return an `InvalidInput` error when it cannot safely escape an argument. This error will be emitted when spawning the process.
The fix is included in Rust 1.77.2. Note that the new escaping logic for batch files errs on the conservative side, and could reject valid arguments. Those who implement the escaping themselves or only handle trusted inputs on Windows can also use the `CommandExt::raw_arg` method to bypass the standard library's escaping logic.
by lpn
Sudo <1.8.26 - Buffer Overflow
In Sudo before 1.8.26, if pwfeedback is enabled in /etc/sudoers, users can trigger a stack-based buffer overflow in the privileged sudo process. (pwfeedback is a default setting in Linux Mint and elementary OS; however, it is NOT the default for upstream and many other packages, and would exist only if enabled by an administrator.) The attacker needs to deliver a long string to the stdin of getln() in tgetpass.c.
by chanbakjsd
Apache Geode < 7.0.100 - Remote Code Execution
When using the Apache JServ Protocol (AJP), care must be taken when trusting incoming connections to Apache Tomcat. Tomcat treats AJP connections as having higher trust than, for example, a similar HTTP connection. If such connections are available to an attacker, they can be exploited in ways that may be surprising. In Apache Tomcat 9.0.0.M1 to 9.0.0.30, 8.5.0 to 8.5.50 and 7.0.0 to 7.0.99, Tomcat shipped with an AJP Connector enabled by default that listened on all configured IP addresses. It was expected (and recommended in the security guide) that this Connector would be disabled if not required. This vulnerability report identified a mechanism that allowed: - returning arbitrary files from anywhere in the web application - processing any file in the web application as a JSP Further, if the web application allowed file upload and stored those files within the web application (or the attacker was able to control the content of the web application by some other means) then this, along with the ability to process a file as a JSP, made remote code execution possible. It is important to note that mitigation is only required if an AJP port is accessible to untrusted users. Users wishing to take a defence-in-depth approach and block the vector that permits returning arbitrary files and execution as JSP may upgrade to Apache Tomcat 9.0.31, 8.5.51 or 7.0.100 or later. A number of changes were made to the default AJP Connector configuration in 9.0.31 to harden the default configuration. It is likely that users upgrading to 9.0.31, 8.5.51 or 7.0.100 or later will need to make small changes to their configurations.
by Warelock
Palo Alto Networks PAN-OS Unauthenticated Remote Code Execution
A command injection as a result of arbitrary file creation vulnerability in the GlobalProtect feature of Palo Alto Networks PAN-OS software for specific PAN-OS versions and distinct feature configurations may enable an unauthenticated attacker to execute arbitrary code with root privileges on the firewall.
Cloud NGFW, Panorama appliances, and Prisma Access are not impacted by this vulnerability.
by CerTusHack
Google Chrome <116.0.5845.96 - Auth Bypass
Insufficient validation of untrusted input in XML in Google Chrome prior to 116.0.5845.96 allowed a remote attacker to bypass file access restrictions via a crafted HTML page. (Chromium security severity: Medium)
by lon5948
xz <5.6.0 - Code Injection
Malicious code was discovered in the upstream tarballs of xz, starting with version 5.6.0.
Through a series of complex obfuscations, the liblzma build process extracts a prebuilt object file from a disguised test file existing in the source code, which is then used to modify specific functions in the liblzma code. This results in a modified liblzma library that can be used by any software linked against this library, intercepting and modifying the data interaction with this library.
by fevar54
CVSS 10.0
Roundcube Webmail <1.4.4 - RCE
rcube_image.php in Roundcube Webmail before 1.4.4 allows attackers to execute arbitrary code via shell metacharacters in a configuration setting for im_convert_path or im_identify_path.
by mbadanoiu
CVSS 9.8
Roundcube Webmail < 1.3.12 - Basic XSS
An issue was discovered in Roundcube Webmail before 1.3.12 and 1.4.x before 1.4.5. There is XSS via a malicious XML attachment because text/xml is among the allowed types for a preview.
by mbadanoiu
CVSS 6.1
Roundcube Webmail <1.4.4 - XSS
An issue was discovered in Roundcube Webmail before 1.4.4. There is a cross-site scripting (XSS) vulnerability in rcube_washtml.php because JavaScript code can occur in the CDATA of an HTML message.
by mbadanoiu
CVSS 6.1
Roundcube Webmail <1.4.4 - Path Traversal
Roundcube Webmail before 1.4.4 allows attackers to include local files and execute code via directory traversal in a plugin name to rcube_plugin_api.php.
by mbadanoiu
CVSS 9.8
jQuery <3.5.0 - XSS
In jQuery versions greater than or equal to 1.0.3 and before 3.5.0, passing HTML containing <option> elements from untrusted sources - even after sanitizing it - to one of jQuery's DOM manipulation methods (i.e. .html(), .append(), and others) may execute untrusted code. This problem is patched in jQuery 3.5.0.
by andreassundstrom
CVSS 6.9
nghttp2 - Memory Corruption
HTTP/2 incoming headers exceeding the limit are temporarily buffered in nghttp2 in order to generate an informative HTTP 413 response. If a client does not stop sending headers, this leads to memory exhaustion.
by lockness-Ko
Palo Alto Networks PAN-OS Unauthenticated Remote Code Execution
A command injection as a result of arbitrary file creation vulnerability in the GlobalProtect feature of Palo Alto Networks PAN-OS software for specific PAN-OS versions and distinct feature configurations may enable an unauthenticated attacker to execute arbitrary code with root privileges on the firewall.
Cloud NGFW, Panorama appliances, and Prisma Access are not impacted by this vulnerability.
by Yuvvi01
Shenzhen TCL Browser TV Web BrowseHere <6.65.022 - XSS
An issue in Shenzhen TCL Browser TV Web BrowseHere (aka com.tcl.browser) 6.65.022_dab24cc6_231221_gp allows a remote attacker to execute arbitrary JavaScript code via the com.tcl.browser.portal.browse.activity.BrowsePageActivity component.
by actuator
Artifex Ghostscript <10.01.2 - Privilege Escalation
Artifex Ghostscript through 10.01.2 mishandles permission validation for pipe devices (with the %pipe% prefix or the | pipe character prefix).
by churamanib
CVSS 7.8
Windows Hyper-V - Privilege Escalation
Windows Hyper-V Elevation of Privilege Vulnerability
by pwndorei
By Source