Writeup Exploits
60,265 exploits tracked across all sources.
Linksys WRT1900ACS, EA7200, EA7450, EA7500 <20250619 - Buffer Overflow
A vulnerability has been found in Linksys WRT1900ACS, EA7200, EA7450 and EA7500 up to 20250619 and classified as critical. This vulnerability affects the function SetDefaultConnectionService of the file /upnp/control/Layer3Forwarding of the component IGD. The manipulation of the argument NewDefaultConnectionService leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
CVSS 8.8
Diyhi Bbs < 6.8 - SSRF
A vulnerability classified as critical has been found in diyhi bbs up to 6.8. This affects the function getUrl of the file /admin/login of the component HTTP Header Handler. The manipulation of the argument Host leads to server-side request forgery. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.
CVSS 6.3
Cometsystem T7611 Firmware - Missing Authentication
A vulnerability was found in Comet System T0510, T3510, T3511, T4511, T6640, T7511, T7611, P8510, P8552 and H3531 1.60. Affected by this issue is some unknown functionality of the file /setupA.cfg of the component Web-based Management Interface. Performing manipulation results in missing authentication. The attack may be initiated remotely. A high degree of complexity is needed for the attack. The exploitation is known to be difficult. The exploit has been made public and could be used. There are still doubts about whether this vulnerability truly exists. The vendor explains, that "[d]evices described at CVE are not intended to be exposed into internet and proper security of devices is to end-users."
CVSS 8.1
Fabian Food Distributor Site - Code Injection
A vulnerability, which was classified as problematic, was found in code-projects Food Distributor Site 1.0. Affected is an unknown function of the file /admin/save_settings.php. The manipulation of the argument site_phone/site_email/address leads to cross site scripting. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.
CVSS 2.4
Linuxfoundation Everest - Resource Allocation Without Limits
EVerest is an EV charging software stack. In versions 2025.9.0 and below, an attacker can exhaust the operating system's memory and cause the module to terminate by initiating an unlimited number of TCP connections that never proceed to ISO 15118-2 communication. This is possible because a new thread is started for each incoming plain TCP or TLS socket connection before any verification occurs, and the verification performed is too permissive. The EVerest processes and all its modules shut down, affecting all EVSE functionality. This issue is fixed in version 2025.10.0.
CVSS 7.4
Authlib < 1.6.6 - CSRF
Authlib is a Python library which builds OAuth and OpenID Connect servers. In versions 1.0.0 through 1.6.5, cache-backed state/request-token storage is not tied to the initiating user session, so CSRF is possible for any attacker that has a valid state (easily obtainable via an attacker-initiated authentication flow). When a cache is supplied to the OAuth client registry, FrameworkIntegration.set_state_data writes the entire state blob under _state_{app}_{state}, and get_state_data ignores the caller’s session altogether. This issue has been patched in version 1.6.6.
CVSS 5.7
Openssl < 1.0.2zn - Out-of-Bounds Write
Issue summary: Writing large, newline-free data into a BIO chain using the
line-buffering filter where the next BIO performs short writes can trigger
a heap-based out-of-bounds write.
Impact summary: This out-of-bounds write can cause memory corruption which
typically results in a crash, leading to Denial of Service for an application.
The line-buffering BIO filter (BIO_f_linebuffer) is not used by default in
TLS/SSL data paths. In OpenSSL command-line applications, it is typically
only pushed onto stdout/stderr on VMS systems. Third-party applications that
explicitly use this filter with a BIO chain that can short-write and that
write large, newline-free data influenced by an attacker would be affected.
However, the circumstances where this could happen are unlikely to be under
attacker control, and BIO_f_linebuffer is unlikely to be handling non-curated
data controlled by an attacker. For that reason the issue was assessed as
Low severity.
The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue,
as the BIO implementation is outside the OpenSSL FIPS module boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue.
CVSS 4.7
Weblate < 5.15.1 - Path Traversal
Weblate is a web based localization tool. In versions prior to 5.15.1, it was possible to overwrite Git configuration remotely and override some of its behavior. Version 5.15.1 fixes the issue.
CVSS 9.1
Parall Jspdf < 4.0.0 - Path Traversal
jsPDF is a library to generate PDFs in JavaScript. Prior to version 4.0.0, user control of the first argument of the loadFile method in the node.js build allows local file inclusion/path traversal. If given the possibility to pass unsanitized paths to the loadFile method, a user can retrieve file contents of arbitrary files in the local file system the node process is running in. The file contents are included verbatim in the generated PDFs. Other affected methods are `addImage`, `html`, and `addFont`. Only the node.js builds of the library are affected, namely the `dist/jspdf.node.js` and `dist/jspdf.node.min.js` files. The vulnerability has been fixed in [email protected]. This version restricts file system access per default. This semver-major update does not introduce other breaking changes. Some workarounds areavailable. With recent node versions, jsPDF recommends using the `--permission` flag in production. The feature was introduced experimentally in v20.0.0 and is stable since v22.13.0/v23.5.0/v24.0.0. For older node versions, sanitize user-provided paths before passing them to jsPDF.
CVSS 7.5
Opensourcepos Open Source Point OF Sale < 3.4.2 - CSRF
Open Source Point of Sale (opensourcepos) is a web based point of sale application written in PHP using CodeIgniter framework. Starting in version 3.4.0 and prior to version 3.4.2, a Cross-Site Request Forgery (CSRF) vulnerability exists in the application's filter configuration. The CSRF protection mechanism was **explicitly disabled**, allowing the application to process state-changing requests (POST) without verifying a valid CSRF token. An unauthenticated remote attacker can exploit this by hosting a malicious web page. If a logged-in administrator visits this page, their browser is forced to send unauthorized requests to the application. A successful exploit allows the attacker to silently create a new Administrator account with full privileges, leading to a complete takeover of the system and loss of confidentiality, integrity, and availability. The vulnerability has been patched in version 3.4.2. The fix re-enables the CSRF filter in `app/Config/Filters.php` and resolves associated AJAX race conditions by adjusting token regeneration settings. As a workaround, administrators can manually re-enable the CSRF filter in `app/Config/Filters.php` by uncommenting the protection line. However, this is not recommended without applying the full patch, as it may cause functionality breakage in the Sales module due to token synchronization issues.
CVSS 8.8
Craftcms Craft Cms < 4.16.17 - SSRF
Craft is a platform for creating digital experiences. In versions 5.0.0-RC1 through 5.8.20 and 4.0.0-RC1 through 4.16.16, the Craft CMS GraphQL `save_<VolumeName>_Asset` mutation is vulnerable to Server-Side Request Forgery (SSRF). This vulnerability arises because the `_file` input, specifically its `url` parameter, allows the server to fetch content from arbitrary remote locations without proper validation. Attackers can exploit this by providing internal IP addresses or cloud metadata endpoints as the `url`, forcing the server to make requests to these restricted services. The fetched content is then saved as an asset, which can subsequently be accessed and exfiltrated, leading to potential data exposure and infrastructure compromise. This exploitation requires specific GraphQL permissions for asset management within the targeted volume. Users should update to the patched 5.8.21 and 4.16.17 releases to mitigate the issue.
CVSS 6.8
Craftcms Craft Cms < 4.16.17 - Remote Code Execution
Craft is a platform for creating digital experiences. Versions 5.0.0-RC1 through 5.8.20 and 4.0.0-RC1 through 4.16.16 are vulnerable to potential authenticated Remote Code Execution via Twig SSTI. For this to work, users must have administrator access to the Craft Control Panel, and allowAdminChanges must be enabled, which is against Craft CMS' recommendations for any non-dev environment. Alternatively, a non-administrator account with allowAdminChanges disabled can be used, provided access to the System Messages utility is available. It is possible to craft a malicious payload using the Twig `map` filter in text fields that accept Twig input under Settings in the Craft control panel or using the System Messages utility, which could lead to a RCE. Users should update to the patched versions (5.8.21 and 4.16.17) to mitigate the issue.
CVSS 8.8
Craftcms Craft Cms < 4.16.17 - Remote Code Execution
Craft is a platform for creating digital experiences. Versions 5.0.0-RC1 through 5.8.20 and 4.0.0-RC1 through 4.16.16 are vulnerable to potential authenticated Remote Code Execution via malicious attached Behavior. Note that attackers must have administrator access to the Craft Control Panel for this to work. Users should update to the patched versions (5.8.21 and 4.16.17) to mitigate the issue.
CVSS 7.2
Craftcms Craft Cms < 4.16.17 - Information Disclosure
Craft is a platform for creating digital experiences. In versions 5.0.0-RC1 through 5.8.20 and 3.0.0 through 4.16.16, unauthenticated users can trigger database backup operations via specific admin actions, potentially leading to resource exhaustion or information disclosure. Users should update to the patched versions (5.8.21 and 4.16.17) to mitigate the issue. Craft 3 users should update to the latest Craft 4 and 5 releases, which include the fixes.
CVSS 9.1
Roundcube Webmail < 1.5.12 - XSS
Roundcube Webmail before 1.5.12 and 1.6 before 1.6.12 is prone to a Cross-Site-Scripting (XSS) vulnerability via the animate tag in an SVG document.
CVSS 7.2
Pypi Biopython - XXE
Bio.Entrez in Biopython through 186 allows doctype XXE.
CVSS 4.9
Espressif Esp-idf - Out-of-Bounds Write
ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.1, 5.4.3, 5.3.4, 5.2.6, 5.1.6, and earlier, in the ESP-IDF Bluetooth host stack (BlueDroid), the function bta_dm_sdp_result() used a fixed-size array uuid_list[32][MAX_UUID_SIZE] to store discovered service UUIDs during the SDP (Service Discovery Protocol) process. On modern Bluetooth devices, it is possible for the number of available services to exceed this fixed limit (32). In such cases, if more than 32 services are discovered, subsequent writes to uuid_list could exceed the bounds of the array, resulting in a potential out-of-bounds write condition.
CVSS 8.6
Espressif Esp-idf - Out-of-Bounds Write
ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.1, 5.4.3, 5.3.4, 5.2.6, 5.1.6, and earlier, in the avrc_vendor_msg() function of the ESP-IDF BlueDroid AVRCP stack, the allocated buffer size was validated using AVRC_MIN_CMD_LEN (20 bytes). However, the actual fixed header data written before the vendor payload exceeds this value. This totals 29 bytes written before p_msg->p_vendor_data is copied. Using the old AVRC_MIN_CMD_LEN could allow an out-of-bounds write if vendor_len approaches the buffer limit. For commands where vendor_len is large, the original buffer allocation may be insufficient, causing writes beyond the allocated memory. This can lead to memory corruption, crashes, or other undefined behavior. The overflow could be larger when assertions are disabled.
CVSS 7.6
Fedify < 1.6.13 - Denial of Service
Fedify is a TypeScript library for building federated server apps powered by ActivityPub. Prior to versions 1.6.13, 1.7.14, 1.8.15, and 1.9.2, a Regular Expression Denial of Service (ReDoS) vulnerability exists in Fedify's document loader. The HTML parsing regex at packages/fedify/src/runtime/docloader.ts:259 contains nested quantifiers that cause catastrophic backtracking when processing maliciously crafted HTML responses. This issue has been patched in versions 1.6.13, 1.7.14, 1.8.15, and 1.9.2.
CVSS 7.5
Pypi Fastapi-users < 15.0.2 - Improper Authorization
FastAPI Users allows users to quickly add a registration and authentication system to their FastAPI project. Prior to version 15.0.2, the OAuth login state tokens are completely stateless and carry no per-request entropy or any data that could link them to the session that initiated the OAuth flow. `generate_state_token()` is always called with an empty `state_data` dict, so the resulting JWT only contains the fixed audience claim plus an expiration timestamp. On callback, the library merely checks that the JWT verifies under `state_secret` and is unexpired; there is no attempt to match the state value to the browser that initiated the OAuth request, no correlation cookie, and no server-side cache. Any attacker can hit `/authorize`, capture the server-generated state, finish the upstream OAuth flow with their own provider account, and then trick a victim into loading `.../callback?code=<attacker_code>&state=<attacker_state>`. Because the state JWT is valid for any client for \~1 hour, the victim’s browser will complete the flow. This leads to login CSRF. Depending on the app’s logic, the login CSRF can lead to an account takeover of the victim account or to the victim user getting logged in to the attacker's account. Version 15.0.2 contains a patch for the issue.
CVSS 5.9
n8n Workflow Expression Remote Code Execution
n8n is an open source workflow automation platform. Versions starting with 0.211.0 and prior to 1.120.4, 1.121.1, and 1.122.0 contain a critical Remote Code Execution (RCE) vulnerability in their workflow expression evaluation system. Under certain conditions, expressions supplied by authenticated users during workflow configuration may be evaluated in an execution context that is not sufficiently isolated from the underlying runtime. An authenticated attacker could abuse this behavior to execute arbitrary code with the privileges of the n8n process. Successful exploitation may lead to full compromise of the affected instance, including unauthorized access to sensitive data, modification of workflows, and execution of system-level operations. This issue has been fixed in versions 1.120.4, 1.121.1, and 1.122.0. Users are strongly advised to upgrade to a patched version, which introduces additional safeguards to restrict expression evaluation. If upgrading is not immediately possible, administrators should consider the following temporary mitigations: Limit workflow creation and editing permissions to fully trusted users only; and/or deploy n8n in a hardened environment with restricted operating system privileges and network access to reduce the impact of potential exploitation. These workarounds do not fully eliminate the risk and should only be used as short-term measures.
CVSS 9.9
FluidSynth <2.5.2 - Use After Free
FluidSynth is a software synthesizer based on the SoundFont 2 specifications. From versions 2.5.0 to before 2.5.2, a race condition during unloading of a DLS file can trigger a heap-based use-after-free. A concurrently running thread may be pending to unload a DLS file, leading to use of freed memory, if the synthesizer is being concurrently destroyed, or samples of the (unloaded) DLS file are concurrently used to synthesize audio. This issue has been patched in version 2.5.2. The problem will not occur, when explicitly unloading a DLS file (before synth destruction), provided that at the time of unloading, no samples of the respective file are used by active voices. The problem will not occur in versions of FluidSynth that have been compiled without native DLS support.
CVSS 7.0
LangChain <0.3.81 and 1.2.5 - Code Injection
LangChain is a framework for building agents and LLM-powered applications. Prior to versions 0.3.81 and 1.2.5, a serialization injection vulnerability exists in LangChain's dumps() and dumpd() functions. The functions do not escape dictionaries with 'lc' keys when serializing free-form dictionaries. The 'lc' key is used internally by LangChain to mark serialized objects. When user-controlled data contains this key structure, it is treated as a legitimate LangChain object during deserialization rather than plain user data. This issue has been patched in versions 0.3.81 and 1.2.5.
CVSS 9.3
5ire <0.15.2 - RCE
5ire is a cross-platform desktop artificial intelligence assistant and model context protocol client. In versions 0.15.2 and prior, an RCE vulnerability exists in useMarkdown.ts, where the markdown-it-mermaid plugin is initialized with securityLevel: 'loose'. This configuration explicitly permits the rendering of HTML tags within Mermaid diagram nodes. This issue has not been patched at time of publication.
CVSS 9.6
RustFS <1.0.0-alpha.79 - Path Traversal
RustFS is a distributed object storage system built in Rust. In versions 1.0.0-alpha.13 to 1.0.0-alpha.78, RustFS contains a path traversal vulnerability in the /rustfs/rpc/read_file_stream endpoint. This issue has been patched in version 1.0.0-alpha.79.
CVSS 9.8
By Source