Writeup Exploits
60,355 exploits tracked across all sources.
SenseLive X3050 Missing authentication for critical function
A vulnerability exists in SenseLive X3050's web management interface that allows critical configuration parameters to be modified without sufficient authentication or server-side validation. By applying unsupported or disruptive values to recovery mechanisms and network settings, an attacker can induce a persistent lockout state. Because the device lacks a physical reset button, recovery requires specialized technical access via the console to perform a factory reset, resulting in a total denial-of-service for the gateway and its connected RS-485 downstream systems.
CVSS 9.1
melange has Path Traversal via .PKGINFO in --persist-lint-results
melange allows users to build apk packages using declarative pipelines. Starting in version 0.32.0 and prior to version 0.43.4, `melange lint --persist-lint-results` (opt-in flag, also usable via `melange build --persist-lint-results`) constructs output file paths by joining `--out-dir` with the `arch` and `pkgname` values read from the `.PKGINFO` control file of the APK being linted. In affected versions these values were not validated for path separators or `..` sequences, so an attacker who can supply an APK to a melange-based lint/build pipeline (e.g. CI that lints third-party APKs, or build-as-a-service) could cause melange to write `lint-<pkgname>-<pkgver>-r<epoch>.json` to an arbitrary `.json` path reachable by the melange process. The written file is a JSON lint report whose content is partially attacker-influenced. There is no direct code-execution path, but the write can clobber other JSON artifacts on the filesystem. The issue only affects deployments that explicitly pass `--persist-lint-results`; the flag is off by default. The issue is fixed in melange v0.43.4 by validating `arch` and `pkgname` for `..`, `/`, and `filepath.Separator` before path construction in `pkg/linter/results.go` (commit 84f3b45). As a workaround, do not pass `--persist-lint-results` when linting or building APKs whose `.PKGINFO` contents are not fully trusted. Running melange as a low-privileged user and confining writes to an isolated directory also limits impact.
CVSS 4.4
MaxiBlocks Builder <= 2.1.8 - Author Arbitrary Media Deletion
The MaxiBlocks Builder plugin for WordPress is vulnerable to arbitrary media file deletion due to insufficient file ownership validation on the 'maxi_remove_custom_image_size' AJAX action in all versions up to, and including, 2.1.8. This makes it possible for authenticated attackers, with Author-level access and above, to delete arbitrary files in the wp-content/uploads directory, including files uploaded by other users and administrators.
CVSS 5.3
Xibo CMS API has SQL Injection via DataSet Filter Parameter
Xibo is an open source digital signage platform with a web content management system and Windows display player software. Versions 1.7 through 4.4.0 have an SQL injection vulnerability in the API routes inside the CMS responsible for Filtering DataSets. This allows an authenticated user to to obtain and modify arbitrary data from the Xibo database by injecting specially crafted values in to the API filter parameter. Exploitation of the vulnerability is possible on behalf of an authorized user who has either of the `Access to DataSet Feature` privilege or the `Access to the Layout Feature` privilege. Users should upgrade to version 4.4.1 which fixes this issue. Customers who host their CMS with Xibo Signage have been patched if they are using 4.4, 4.3, 3.3, 2.3 or 1.8. Upgrading to a fixed version is necessary to remediate. Patches are available for earlier versions of Xibo CMS that are out of support, namely 3.3, 2.3, and 1.8.
CVSS 7.6
Xibo CMS API has SQL Injection via DataSet Filter Parameter
Xibo is an open source digital signage platform with a web content management system and Windows display player software. Versions 1.7 through 4.4.0 have an SQL injection vulnerability in the API routes inside the CMS responsible for Filtering DataSets. This allows an authenticated user to to obtain and modify arbitrary data from the Xibo database by injecting specially crafted values in to the API filter parameter. Exploitation of the vulnerability is possible on behalf of an authorized user who has either of the `Access to DataSet Feature` privilege or the `Access to the Layout Feature` privilege. Users should upgrade to version 4.4.1 which fixes this issue. Customers who host their CMS with Xibo Signage have been patched if they are using 4.4, 4.3, 3.3, 2.3 or 1.8. Upgrading to a fixed version is necessary to remediate. Patches are available for earlier versions of Xibo CMS that are out of support, namely 3.3, 2.3, and 1.8.
CVSS 7.6
Roxy-WI vulnerable to path traversal and arbitrary file writing
Roxy-WI is a web interface for managing Haproxy, Nginx, Apache and Keepalived servers. Prior to version 8.2.6.4, the haproxy_section_save interface presents a vulnerability that could lead to remote code execution due to path traversal and writing into scheduled tasks. Version 8.2.6.4 fixes the issue.
CVSS 9.8
Roxy-WI has an arbitrary file read vulnerability
Roxy-WI is a web interface for managing Haproxy, Nginx, Apache and Keepalived servers. Prior to version 8.2.6.4, the oldconfig parameter in the haproxy_section_save interface has an arbitrary file read vulnerability. Version 8.2.6.4 fixes the issue.
CVSS 7.5
Roxy-WI has SQL Injection in haproxy_section_save Endpoint via Unsanitized server_ip Parameter
Roxy-WI is a web interface for managing Haproxy, Nginx, Apache and Keepalived servers. Versions prior to 8.2.6.4 have a SQL injection vulnerability in the haproxy_section_save function in app/routes/config/routes.py. The server_ip parameter, sourced from the URL path, is passed unsanitized through multiple function calls and ultimately interpolated into a SQL query string using Python string formatting, allowing attackers to execute arbitrary SQL commands. Version 8.2.6.4 fixes the issue.
CVSS 9.8
Roxy-WI Vulnerable to Authenticated Remote Code Execution via OS Command Injection in find-in-config Endpoint
Roxy-WI is a web interface for managing Haproxy, Nginx, Apache and Keepalived servers. Prior to version 8.2.6.4, the /config/ < service > /find-in-config endpoint in Roxy-WI fails to sanitize the user-supplied words parameter before embedding it into a shell command string that is subsequently executed on a remote managed server via SSH. An authenticated attacker can inject arbitrary shell metacharacters to break out of the intended grep command context and execute arbitrary OS commands with sudo privileges on the target server, resulting in full Remote Code Execution (RCE). Version 8.2.6.4 patches the issue.
CVSS 8.8
Op-tee Optee OS - Out-of-Bounds Access
OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. In versions 3.13.0 through 4.10.0, missing checks in `entry_get_attribute_value()` in `ta/pkcs11/src/object.c` can lead to out-of-bounds read from the PKCS#11 TA heap or a crash. When chained with the OOB read, the PKCS#11 TA function `PKCS11_CMD_GET_ATTRIBUTE_VALUE` or `entry_get_attribute_value()` can, with a bad template parameter, be tricked into reading at most 7 bytes beyond the end of the template buffer and writing beyond the end of the template buffer with the content of an attribute value of a PKCS#11 object. Commits e031c4e562023fd9f199e39fd2e85797e4cbdca9, 16926d5a46934c46e6656246b4fc18385a246900, and 149e8d7ecc4ef8bb00ab4a37fd2ccede6d79e1ca contain patches and are anticipated to be part of version 4.11.0.
CVSS 8.7
SenseLive X3050 Missing authentication for critical function
A vulnerability in SenseLive X3050’s management ecosystem allows unauthenticated discovery of deployed units through the vendor’s management protocol, enabling identification of device presence, identifiers, and management interfaces without requiring credentials. Because discovery functions are exposed by the underlying service rather than gated by authentication, an attacker on the same network segment can rapidly enumerate targeted devices.
CVSS 7.5
SenseLive X3050 Use of Hard-coded Credentials
A vulnerability in SenseLive X3050’s web management interface allows authentication logic to be performed entirely on the client side, relying on hardcoded values within browser-executed scripts rather than server-side verification. An attacker with access to the login page could retrieve these exposed parameters and gain unauthorized access to administrative functionality.
CVSS 9.8
SenseLive X3050 Insufficiently Protected Credentials
A vulnerability exists in SenseLive X3050’s web management interface in which password updates are not reliably applied due to improper handling of credential changes on the backend. After the device undergoes a factory restore using the SenseLive Config 2.0 tool, the interface may indicate that the password update was successful; however, the system may continue to accept the previous or default credentials, demonstrating that the password-change process is not consistently enforced. Even after a factory reset, attempted password changes may fail to propagate correctly.
CVSS 8.1
SenseLive X3050 Cleartext transmission of sensitive information
A vulnerability exists in SenseLive X3050’s web management interface due to its reliance on unencrypted HTTP for all administrative communication. Because management traffic, including authentication attempts and configuration data, is transmitted in cleartext, an attacker with access to the same network segment could intercept or observe sensitive operational information.
CVSS 5.3
SenseLive X3050 Missing authentication for critical function
A vulnerability in SenseLive X3050’s embedded management service allows full administrative control to be established without any form of authentication or authorization on the SenseLive config application. The service accepts management connections from any reachable host, enabling unrestricted modification of critical configuration parameters, operational modes, and device state through a vendor-supplied or compatible client.
CVSS 9.8
SenseLive X3050 Missing Authorization
A vulnerability in SenseLive X3050's web management interface allows critical system and network configuration parameters to be modified without sufficient validation and safety controls. Due to inadequate enforcement of constraints on sensitive functions, parameters such as IP addressing, watchdog timers, reconnect intervals, and service ports can be set to unsupported or unsafe values. These configuration changes directly affect core device behaviour and recovery mechanisms. The lack of proper validation and safeguards allows critical system functions to be altered in a manner that can destabilize device operation or render the device persistently unavailable.
CVSS 8.1
Kyverno: Cross-Namespace Read Bypasses RBAC Isolation (CVE-2026-22039 Incomplete Fix)
Kyverno is a policy engine designed for cloud native platform engineering teams. The patch for CVE-2026-22039 fixed cross-namespace privilege escalation in Kyverno's `apiCall` context by validating the `URLPath` field. However, the ConfigMap context loader has the identical vulnerability — the `configMap.namespace` field accepts any namespace with zero validation, allowing a namespace admin to read ConfigMaps from any namespace using Kyverno's privileged service account. This is a complete RBAC bypass in multi-tenant Kubernetes clusters. An updated fix is available in version 1.17.2.
CVSS 7.7
Open Source Social Network (OSSN) Vulnerable to Resource Exhaustion via Malicious Image Processing
Open Source Social Network (OSSN) is open-source social networking software developed in PHP. Versions prior to 9.0 are vulnerable to resource exhaustion. An attacker can upload a specially crafted image with extreme pixel dimensions (e.g., $10000 \times 10000$ pixels). While the compressed file size on disk may be small, the server attempts to allocate significant memory and CPU cycles during the decompression and resizing process, leading to a Denial of Service (DoS) condition. It is highly recommended to upgrade to OSSN 9.0. This version introduces stricter validation of image dimensions and improved resource management during the processing phase. Those who cannot upgrade immediately can mitigate the risk by adjusting their `php.ini` settings to strictly limit `memory_limit` and `max_execution_time` and/or implementing a client-side and server-side check on image headers to reject files exceeding reasonable pixel dimensions (e.g., $4000 \times 4000$ pixels) before processing begins.
CVSS 8.2
Frappe Press has an unsafe HTTP method / CSRF-adjacent issue on API secret generation
Press, a Frappe custom app that runs Frappe Cloud, manages infrastructure, subscription, marketplace, and software-as-a-service (SaaS).`press.api.account.create_api_secret` is prone to CSRF-like exploits. This endpoint writes to database and it is also accessible via GET method. The patch in commit 52ea2f2d1b587be0807557e96f025f47897d00fd restricts method to POST.
CVSS 7.5
AnythingLLM < 1.12.1 - Stored DOM XSS in Chart Caption Renderer
AnythingLLM is an application that turns pieces of content into context that any LLM can use as references during chatting. Prior to version 1.12.1, AnythingLLM's in-chat markdown renderer has an unsafe custom rule for images that interpolates the markdown image's `alt` text into an HTML `alt="..."` attribute without any HTML encoding. Every call-site in the app wraps `renderMarkdown(...)` with `DOMPurify.sanitize(...)` as defense-in-depth — except the `Chartable` component, which renders chart captions with no sanitization. The chart caption is the natural-language text the LLM emits around a `create-chart` tool call, so any attacker who can influence the LLM's output — most cheaply via indirect prompt injection in a shared workspace document, or directly if they can create a chart record in a multi-user workspace — can trigger stored DOM-level XSS in every other user's browser when they open that conversation. AnythingLLM chat history is loaded server-side via `GET /api/workspace/:slug/chats` and rendered directly into the chat UI. Version 1.12.1 contains a patch for this issue.
CVSS 5.4
Kyverno: ServiceAccount token leaked to external servers via apiCall service URL
Kyverno is a policy engine designed for cloud native platform engineering teams. Prior to versions 1.18.0-rc1, 1.17.2-rc1, and 1.16.4, Kyverno's apiCall feature in ClusterPolicy automatically attaches the admission controller's ServiceAccount token to outgoing HTTP requests. The service URL has no validation — it can point anywhere, including attacker-controlled servers. Since the admission controller SA has permissions to patch webhook configurations, a stolen token leads to full cluster compromise. Versions 1.18.0-rc1, 1.17.2-rc1, and 1.16.4 patch the issue.
CVSS 8.1
Press vulnerable to reflected XSS on login redirection
Press, a Frappe custom app that runs Frappe Cloud, manages infrastructure, subscription, marketplace, and software-as-a-service (SaaS). Redirect parameter on login page is vulnerable to reflected XSS. The patch in commit 16d1b6ca2559f858a1de77bcb03fd7f1b81671c6 fixes the issue by restricting redirects to internal URLs only.
CVSS 6.1
Kyverno Controller Denial of Service via forEach Mutation Panic
Kyverno is a policy engine designed for cloud native platform engineering teams. Prior to versions 1.17.2 and 1.16.4, an unchecked type assertion in the `forEach` mutation handler allows any user with permission to create a `Policy` or `ClusterPolicy` to crash the cluster-wide background controller into a persistent CrashLoopBackOff. The same bug also causes the admission controller to drop connections and block all matching resource operations. The crash loop persists until the policy is deleted. The vulnerability is confined to the legacy engine, and CEL-based policies are unaffected. Versions 1.17.2 and 1.16.4 fix the issue.
CVSS 7.7
SenseLive X3050 Insufficient session expiration
A vulnerability exists in SenseLive
X3050’s web management interface due to improper session lifetime enforcement, allowing authenticated sessions to remain active for extended periods without requiring re-authentication. An attacker with access to a previously authenticated session could continue interacting with administrative functions long after legitimate user activity has ceased.
CVSS 5.4
SWUpdate Integer Underflow in Multipart Upload Parser
SWUpdate contains an integer underflow vulnerability in the multipart upload parser in mongoose_multipart.c that allows unauthenticated attackers to cause a denial of service by sending a crafted HTTP POST request to /upload with a malformed multipart boundary and controlled TCP stream timing. Attackers can trigger an integer underflow in the mg_http_multipart_continue_wait_for_chunk() function when the buffer length falls within a specific range, causing an out-of-bounds heap read that writes data beyond the allocated receive buffer to a local IPC socket.
CVSS 6.8
By Source