Exploit Database
145,324 exploits tracked across all sources.
Nagios Fusion <2024R2 - Auth Bypass
A lack of rate limiting in the OTP verification component of Nagios Fusion v2024R1.2 and v2024R2 allows attackers to bypass authentication via a bruteforce attack.
CVSS 7.6
Nagios Fusion <2024R2 - Session Hijacking
Nagios Fusion v2024R1.2 and v2024R2 does not invalidate already existing session tokens when the two-factor authentication mechanism is enabled, allowing attackers to perform a session hijacking attack.
CVSS 8.6
Nagios Fusion <2024R2 - Session Hijacking
Nagios Fusion v2024R1.2 and v2024R2 does not invalidate already existing session tokens when the two-factor authentication mechanism is enabled, allowing attackers to perform a session hijacking attack.
CVSS 8.6
Modular Max Serve <25.6 - Code Injection
Unsafe Deserialization vulnerability in Modular Max Serve before 25.6, specifically when the "--experimental-enable-kvcache-agent" feature is used allowing attackers to execute arbitrary code.
CVSS 8.4
kafka-ui 0.6.0-0.7.2 - Remote Code Execution via CustomSerdeLoader Input Validation
Improper input validation in the component /kafka/ui/serdes/CustomSerdeLoader.java of kafka-ui v0.6.0 to v0.7.2 allows attackers to execute arbitrary code via supplying crafted data.
CVSS 6.5
kafka-ui 0.6.0-0.7.2 - Remote Code Execution via CustomSerdeLoader Input Validation
Improper input validation in the component /kafka/ui/serdes/CustomSerdeLoader.java of kafka-ui v0.6.0 to v0.7.2 allows attackers to execute arbitrary code via supplying crafted data.
CVSS 6.5
kafka-ui 0.6.0-0.7.2 - Denial of Service via Crafted Configuration File Upload
An issue in the Configure New Cluster interface of kafka-ui v0.6.0 to v0.7.2 allows attackers to cause a Denial of Service (DoS) via uploading a crafted configuration file.
CVSS 7.5
kafka-ui 0.6.0-0.7.2 - Denial of Service via Crafted Configuration File Upload
An issue in the Configure New Cluster interface of kafka-ui v0.6.0 to v0.7.2 allows attackers to cause a Denial of Service (DoS) via uploading a crafted configuration file.
CVSS 7.5
Kafka UI < 0.7.2 - Remote Code Execution via JMX Deserialization
Kafka UI is an Open-Source Web UI for Apache Kafka Management. Kafka UI API allows users to connect to different Kafka brokers by specifying their network address and port. As a separate feature, it also provides the ability to monitor the performance of Kafka brokers by connecting to their JMX ports. JMX is based on the RMI protocol, so it is inherently susceptible to deserialization attacks. A potential attacker can exploit this feature by connecting Kafka UI backend to its own malicious broker. This vulnerability affects the deployments where one of the following occurs: 1. dynamic.config.enabled property is set in settings. It's not enabled by default, but it's suggested to be enabled in many tutorials for Kafka UI, including its own README.md. OR 2. an attacker has access to the Kafka cluster that is being connected to Kafka UI. In this scenario the attacker can exploit this vulnerability to expand their access and execute code on Kafka UI as well. Instead of setting up a legitimate JMX port, an attacker can create an RMI listener that returns a malicious serialized object for any RMI call. In the worst case it could lead to remote code execution as Kafka UI has the required gadget chains in its classpath. This issue may lead to post-auth remote code execution. This is particularly dangerous as Kafka-UI does not have authentication enabled by default. This issue has been addressed in version 0.7.2. All users are advised to upgrade. There are no known workarounds for this vulnerability. These issues were discovered and reported by the GitHub Security lab and is also tracked as GHSL-2023-230.
CVSS 8.1
Kafka UI < 0.7.2 - Remote Code Execution via JMX Deserialization
Kafka UI is an Open-Source Web UI for Apache Kafka Management. Kafka UI API allows users to connect to different Kafka brokers by specifying their network address and port. As a separate feature, it also provides the ability to monitor the performance of Kafka brokers by connecting to their JMX ports. JMX is based on the RMI protocol, so it is inherently susceptible to deserialization attacks. A potential attacker can exploit this feature by connecting Kafka UI backend to its own malicious broker. This vulnerability affects the deployments where one of the following occurs: 1. dynamic.config.enabled property is set in settings. It's not enabled by default, but it's suggested to be enabled in many tutorials for Kafka UI, including its own README.md. OR 2. an attacker has access to the Kafka cluster that is being connected to Kafka UI. In this scenario the attacker can exploit this vulnerability to expand their access and execute code on Kafka UI as well. Instead of setting up a legitimate JMX port, an attacker can create an RMI listener that returns a malicious serialized object for any RMI call. In the worst case it could lead to remote code execution as Kafka UI has the required gadget chains in its classpath. This issue may lead to post-auth remote code execution. This is particularly dangerous as Kafka-UI does not have authentication enabled by default. This issue has been addressed in version 0.7.2. All users are advised to upgrade. There are no known workarounds for this vulnerability. These issues were discovered and reported by the GitHub Security lab and is also tracked as GHSL-2023-230.
CVSS 8.1
Karakeep 0.30.0 - Stored Cross-Site Scripting via Reddit Metascraper Plugin
Karakeep is a elf-hostable bookmark-everything app. In version 0.30.0, when the Reddit metascraper plugin returns `readableContentHtml`, the HTML parsing subprocess uses it directly without running it through DOMPurify. Every other content source in the crawler goes through Readability + DOMPurify, but the Reddit path skips both. Since this content ends up in `dangerouslySetInnerHTML` in the reader view, any malicious HTML in the Reddit response gets executed in the user's browser. Version 0.31.0 contains a patch for this issue.
CVSS 8.2
Karakeep 0.30.0 - Stored Cross-Site Scripting via Reddit Metascraper Plugin
Karakeep is a elf-hostable bookmark-everything app. In version 0.30.0, when the Reddit metascraper plugin returns `readableContentHtml`, the HTML parsing subprocess uses it directly without running it through DOMPurify. Every other content source in the crawler goes through Readability + DOMPurify, but the Reddit path skips both. Since this content ends up in `dangerouslySetInnerHTML` in the reader view, any malicious HTML in the Reddit response gets executed in the user's browser. Version 0.31.0 contains a patch for this issue.
CVSS 8.2
karakeep 0.26.0-0.7.0 - Server-Side Request Forgery
karakeep v0.26.0 to v0.7.0 was discovered to contain a Server-Side Request Forgery (SSRF).
CVSS 6.5
gsigel14 ATLAS-EPIC - Info Disclosure
Hardcoded credentials in gsigel14 ATLAS-EPIC commit f29312c (2025-05-26).
CVSS 6.5
Linksys E1200 v2 Firmware - Unauthenticated Stack-based Buffer Overflow via HTTP CGI Parameters
A stack-based buffer overflow exists in the get_merge_ipaddr function of the httpd binary on Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The function concatenates up to four user-supplied CGI parameters matching <parameter>_0~3 into a fixed-size buffer (a2) without bounds checking. Remote attackers can exploit this vulnerability via specially crafted HTTP requests to execute arbitrary code or cause denial of service without authentication.
CVSS 8.8
D-Link DIR-882 Router <DIR882A1_FW102B02 - Command Injection
A command injection vulnerability exists in the D-Link DIR-882 Router firmware DIR882A1_FW102B02 within the `prog.cgi` and `rc` binaries. The `sub_4438A4` function in `prog.cgi` stores user-supplied DDNS parameters (`ServerAddress` and `Hostname`) in NVRAM via `nvram_safe_set`. These values are later retrieved in the `start_DDNS_ipv4` function of `rc` using `nvram_safe_get` and concatenated into DDNS shell commands executed via `twsystem()` without proper sanitization. Partial string comparison is performed but is insufficient to prevent command injection. An unauthenticated remote attacker can exploit this vulnerability to execute arbitrary commands on the device through specially crafted HTTP requests to the router's web interface.
CVSS 7.3
D-Link DIR-882 Router <DIR882A1_FW102B02 - Command Injection
A command injection vulnerability exists in the D-Link DIR-882 Router firmware DIR882A1_FW102B02 within the `prog.cgi` and `rc` binaries. The `sub_432F60` function in `prog.cgi` stores user-supplied `SetSysLogSettings/IPAddress` values in NVRAM via `nvram_safe_set("SysLogRemote_IPAddress", ...)`. These values are later retrieved in the `sub_448DCC` function of `rc` using `nvram_safe_get` and concatenated into a shell command executed via `twsystem()` without any sanitization. An unauthenticated remote attacker can exploit this vulnerability to execute arbitrary commands on the device through specially crafted HTTP requests to the router's web interface.
CVSS 7.3
TOTOLINK A950RG Router <5.9c.4592_B20191022_ALL - Buffer Overflow
A buffer overflow vulnerability exists in the TOTOLINK A950RG Router firmware V5.9c.4592_B20191022_ALL within the `global.so` binary. The `getSaveConfig` function retrieves the `http_host` parameter from user input via `websGetVar` and copies it into a fixed-size stack buffer (`v13`) using `strcpy()` without performing any length checks. An unauthenticated remote attacker can exploit this vulnerability by sending a specially crafted HTTP request to the router's web interface, potentially leading to arbitrary code execution.
CVSS 6.5
D-Link DIR-882 Router - Command Injection
A command injection vulnerability exists in the D-Link DIR-882 Router firmware DIR882A1_FW102B02 within the `prog.cgi` and `librcm.so` binaries. The `sub_4455BC` function in `prog.cgi` stores user-supplied `SetDMZSettings/IPAddress` values in NVRAM via `nvram_safe_set("dmz_ipaddr", ...)`. These values are later retrieved in the `DMZ_run` function of `librcm.so` using `nvram_safe_get` and concatenated into `iptables` shell commands executed via `twsystem()` without any sanitization. An unauthenticated remote attacker can exploit this vulnerability to execute arbitrary commands on the device through specially crafted HTTP requests to the router's web interface.
CVSS 6.5
D-Link DIR-882 Router <DIR882A1_FW102B02 - Command Injection
A command injection vulnerability exists in the D-Link DIR-882 Router firmware DIR882A1_FW102B02 within the `prog.cgi` and `rc` binaries. The `sub_433188` function in `prog.cgi` stores user-supplied email configuration parameters (`EmailFrom`, `EmailTo`, `SMTPServerAddress`, `SMTPServerPort`, `AccountName`) in NVRAM via `nvram_safe_set`. These values are later retrieved in the `sub_448FDC` function of `rc` using `nvram_safe_get` and concatenated into shell commands executed via `twsystem()` without sanitization. An unauthenticated remote attacker can exploit this vulnerability to execute arbitrary commands on the device through specially crafted HTTP requests to the router's web interface.
CVSS 6.5
TOTOLINK A950RG Router V5.9c.4592_B20191022_ALL - Command Injection
A command injection vulnerability exists in the TOTOLINK A950RG Router firmware V5.9c.4592_B20191022_ALL within the `system.so` binary. The `setDiagnosisCfg` function retrieves the `ipDoamin` parameter from user input via `websGetVar` and concatenates it directly into a `ping` system command executed via `CsteSystem()` without any sanitization. An unauthenticated remote attacker can exploit this vulnerability to execute arbitrary commands on the device through specially crafted HTTP requests to the router's web interface.
CVSS 6.5
XiaozhangBang Voluntary Like System V8.8 - Info Disclosure
A vulnerability in the XiaozhangBang Voluntary Like System V8.8 allows remote attackers to manipulate the zhekou parameter in the /topfirst.php Pay module, enabling unauthorized discounts. By sending a crafted HTTP POST request with zhekou set to an abnormally low value, an attacker can purchase votes at a reduced cost. Furthermore, by modifying the zid parameter, attackers can influence purchases made by other users, amplifying the impact. This issue stems from insufficient server-side validation of these parameters, potentially leading to economic loss and unfair manipulation of vote counts.
CVSS 6.5
MotionEye <= 0.43.1b4 - Authenticated Configuration Command Injection
MotionEye v0.43.1b4 and before is vulnerable to OS Command Injection in configuration parameters such as image_file_name. Unsanitized user input is written to Motion configuration files, allowing remote authenticated attackers with admin access to achieve code execution when Motion is restarted.
CVSS 7.2
phppgadmin < 7.13.0 - Authenticated SQL Injection via display.php
phpPgAdmin 7.13.0 and earlier contains a SQL injection vulnerability in display.php at line 396. The application passes user-controlled input from $_REQUEST['query'] directly to the browseQuery function without proper sanitization. An authenticated attacker can exploit this vulnerability to execute arbitrary SQL commands through malicious query manipulation, potentially leading to complete database compromise.
CVSS 6.5
WukongCRM-9.0-JAVA - Code Injection
WukongCRM-9.0-JAVA was discovered to contain a fastjson deserialization vulnerability via the /OaExamine/setOaExamine interface.
CVSS 6.5
By Source