Writeup Exploits
64,858 exploits tracked across all sources.
solidinvoice < 2.4.0 - Stored Cross-Site Scripting via Clients Module Name Parameter
A security flaw has been discovered in SolidInvoice up to 2.4.0. The impacted element is an unknown function of the file /clients of the component Clients Module. Performing manipulation of the argument Name results in cross site scripting. The attack is possible to be carried out remotely. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way.
CVSS 3.5
CMS Decryptor <unknown - Memory Corruption
Issue summary: An application trying to decrypt CMS messages encrypted using
password based encryption can trigger an out-of-bounds read and write.
Impact summary: This out-of-bounds read may trigger a crash which leads to
Denial of Service for an application. The out-of-bounds write can cause
a memory corruption which can have various consequences including
a Denial of Service or Execution of attacker-supplied code.
Although the consequences of a successful exploit of this vulnerability
could be severe, the probability that the attacker would be able to
perform it is low. Besides, password based (PWRI) encryption support in CMS
messages is very rarely used. For that reason the issue was assessed as
Moderate severity according to our Security Policy.
The FIPS modules in 3.5, 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected by this
issue, as the CMS implementation is outside the OpenSSL FIPS module
boundary.
CVSS 7.5
OpenSSL 3.2.0-3.2.5, 3.3.0-3.3.4, 3.4.0-3.4.2, 3.5.0-3.5.3 - SM2 Timing Side-Channel on 64-bit ARM
Issue summary: A timing side-channel which could potentially allow remote
recovery of the private key exists in the SM2 algorithm implementation on 64 bit
ARM platforms.
Impact summary: A timing side-channel in SM2 signature computations on 64 bit
ARM platforms could allow recovering the private key by an attacker..
While remote key recovery over a network was not attempted by the reporter,
timing measurements revealed a timing signal which may allow such an attack.
OpenSSL does not directly support certificates with SM2 keys in TLS, and so
this CVE is not relevant in most TLS contexts. However, given that it is
possible to add support for such certificates via a custom provider, coupled
with the fact that in such a custom provider context the private key may be
recoverable via remote timing measurements, we consider this to be a Moderate
severity issue.
The FIPS modules in 3.5, 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected by this
issue, as SM2 is not an approved algorithm.
CVSS 6.5
OpenSSL 3.0.16-3.0.17, 3.2.4-3.2.5, 3.3.3-3.3.4, 3.4.0-3.4.2, 3.5.0-3.5.3 DoS via HTTP Client API no_proxy
Issue summary: An application using the OpenSSL HTTP client API functions may
trigger an out-of-bounds read if the 'no_proxy' environment variable is set and
the host portion of the authority component of the HTTP URL is an IPv6 address.
Impact summary: An out-of-bounds read can trigger a crash which leads to
Denial of Service for an application.
The OpenSSL HTTP client API functions can be used directly by applications
but they are also used by the OCSP client functions and CMP (Certificate
Management Protocol) client implementation in OpenSSL. However the URLs used
by these implementations are unlikely to be controlled by an attacker.
In this vulnerable code the out of bounds read can only trigger a crash.
Furthermore the vulnerability requires an attacker-controlled URL to be
passed from an application to the OpenSSL function and the user has to have
a 'no_proxy' environment variable set. For the aforementioned reasons the
issue was assessed as Low severity.
The vulnerable code was introduced in the following patch releases:
3.0.16, 3.1.8, 3.2.4, 3.3.3, 3.4.0 and 3.5.0.
The FIPS modules in 3.5, 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected by this
issue, as the HTTP client implementation is outside the OpenSSL FIPS module
boundary.
CVSS 5.9
Scada-LTS < 2.7.8.1 - Stored Cross-Site Scripting via view_edit.shtm Name Parameter
A security vulnerability has been detected in Scada-LTS up to 2.7.8.1. Impacted is an unknown function of the file view_edit.shtm. The manipulation of the argument Name leads to cross site scripting. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used.
CVSS 3.5
Scada-LTS < 2.7.8.1 - Stored Cross-Site Scripting via maintenance_events.shtm Alias Parameter
A vulnerability was detected in Scada-LTS up to 2.7.8.1. The affected element is an unknown function of the file maintenance_events.shtm. The manipulation of the argument Alias results in cross site scripting. The attack can be executed remotely. The exploit is now public and may be used.
CVSS 3.5
Scada-LTS <= 2.7.8.1 - Stored Cross-Site Scripting via compound_events.shtm Name Parameter
A flaw has been found in Scada-LTS up to 2.7.8.1. The impacted element is an unknown function of the file compound_events.shtm. This manipulation of the argument Name causes cross site scripting. The attack is possible to be carried out remotely. The exploit has been published and may be used.
CVSS 3.5
Portabilis i-Educar <2.10 - SQL Injection
A vulnerability has been found in Portabilis i-Educar up to 2.10. This affects an unknown function of the file /intranet/educar_tipo_usuario_lst.php of the component Tipos de usuàrio Page. Such manipulation of the argument nm_tipo/descrição leads to sql injection. The attack may be performed from a remote location. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
CVSS 6.3
CodeAstro Ecommerce Website 1.0 - XSS
A vulnerability was found in CodeAstro Ecommerce Website 1.0. This impacts an unknown function of the file /customer/my_account.php?edit_account of the component Edit Your Account Page. Performing manipulation of the argument Username results in cross site scripting. It is possible to initiate the attack remotely. The exploit has been made public and could be used.
CVSS 3.5
Swatadru Exam-Seating-Arrangement - SQL Injection in /student.php
A vulnerability was determined in Swatadru Exam-Seating-Arrangement up to 97335ccebf95468d92525f4255a2241d2b0b002f. Affected is an unknown function of the file /student.php of the component Student Login. Executing manipulation of the argument email can lead to sql injection. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. The vendor was contacted early about this disclosure but did not respond in any way.
CVSS 7.3
wong2 mcp-cli 1.13.0 - Command Injection
A flaw has been found in wong2 mcp-cli 1.13.0. Affected is the function redirectToAuthorization of the file /src/oauth/provider.js of the component oAuth Handler. This manipulation causes os command injection. The attack may be initiated remotely. The attack is considered to have high complexity. The exploitability is told to be difficult. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
CVSS 5.6
Tenda i22 1.0.0.3(4687) - Buffer Overflow
A vulnerability was detected in Tenda i22 1.0.0.3(4687). This impacts the function formWeixinAuthInfoGet of the file /goform/wxportalauth. Performing manipulation of the argument Type results in stack-based buffer overflow. The attack can be initiated remotely. The exploit is now public and may be used.
CVSS 8.8
Tenda M3 1.0.0.12 - Buffer Overflow
A flaw has been found in Tenda M3 1.0.0.12. Affected is the function formQuickIndex of the file /goform/QuickIndex. Executing manipulation of the argument PPPOEPassword can lead to stack-based buffer overflow. The attack can be launched remotely. The exploit has been published and may be used.
CVSS 8.8
Tenda M3 1.0.0.12 - Buffer Overflow
A vulnerability has been found in Tenda M3 1.0.0.12. Affected by this vulnerability is the function formGetMasterPassengerAnalyseData of the file /goform/getMasterPassengerAnalyseData. The manipulation of the argument Time leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.
CVSS 8.8
TOTOLINK A720R 4.1.5cu.630_B20250509 - Buffer Overflow
A security flaw has been discovered in TOTOLINK A720R 4.1.5cu.630_B20250509. This issue affects the function setParentalRules of the file /cgi-bin/cstecgi.cgi. Performing manipulation of the argument desc results in buffer overflow. The attack is possible to be carried out remotely. The exploit has been released to the public and may be exploited.
CVSS 8.8
Tenda AC10 16.03.10.13 - Info Disclosure
A vulnerability was found in Tenda AC10 16.03.10.13. Affected is an unknown function of the file /etc_ro/shadow of the component MD5 Hash Handler. Performing manipulation results in hard-coded credentials. The attack needs to be approached locally. A high degree of complexity is needed for the attack. The exploitability is told to be difficult. The exploit has been made public and could be used.
CVSS 2.5
Linksys RE6250-RE9000 <1.2.07.001 - Buffer Overflow
A vulnerability was found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Affected by this vulnerability is the function scheduleAdd of the file /goform/scheduleAdd. Performing manipulation of the argument ruleName results in stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.
CVSS 8.8
Linksys RE6250-RE9000 - Buffer Overflow
A vulnerability was determined in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Affected by this issue is the function inboundFilterAdd of the file /goform/inboundFilterAdd. Executing manipulation of the argument ruleName can lead to stack-based buffer overflow. The attack may be performed from a remote location. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.
CVSS 8.8
Linksys RE6250-RE9000 <1.2.07.001 - Buffer Overflow
A vulnerability was identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This affects the function langSwitchByBBS of the file /goform/langSwitchByBBS. The manipulation of the argument langSelectionOnly leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.
CVSS 8.8
Linksys RE6250-RE9000 <1.2.07.001 - Buffer Overflow
A security flaw has been discovered in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This vulnerability affects the function setSysAdm of the file /goform/setSysAdm. The manipulation of the argument admpasshint results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way.
CVSS 8.8
Linksys RE6250/RE6300/RE6350/RE6500/RE7000/RE9000 - Stack-Based Buffer Overflow via RP_checkCredentialsByBBS
A weakness has been identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This issue affects the function RP_checkCredentialsByBBS of the file /goform/RP_checkCredentialsByBBS. This manipulation of the argument ssidhex/pwd causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way.
CVSS 8.8
Linksys RE6250-RE9000 1.0.013.001/1.2.07.001 - Buffer Overflow
A security vulnerability has been detected in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Impacted is the function accessControlAdd of the file /goform/accessControlAdd. Such manipulation of the argument ruleName/schedule leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
CVSS 8.8
Linksys RE6250-RE9000 - Buffer Overflow
A vulnerability was detected in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. The affected element is the function ipRangeBlockManageRule of the file /goform/ipRangeBlockManageRule. Performing manipulation of the argument ipRangeBlockRuleName/scheduleIp/ipRangeBlockRuleIpAddr results in stack-based buffer overflow. The attack may be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
CVSS 8.8
Linksys RE6250-RE9000 <1.2.07.001 - Buffer Overflow
A vulnerability has been found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This affects the function portTriggerManageRule of the file /goform/portTriggerManageRule. The manipulation of the argument triggerRuleName/schedule leads to stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
CVSS 8.8
xmltodict 0.14.2-0.15.0 - XML Injection via Unsanitized Element Names
XML Injection vulnerability in xmltodict allows Input Data Manipulation.
This issue affects xmltodict: from 0.14.2 before 0.15.1.
NOTE: the scope of this CVE is disputed by the vendor on the grounds that xmltodict.unparse() delegates element-name handling to Python's xml.sax.saxutils.XMLGenerator, and that XMLGenerator should be the component performing validation.
By Source