Writeup Exploits
60,946 exploits tracked across all sources.
UTT HiPER 520 1.7.7-160105 - Command Injection
A vulnerability was detected in UTT HiPER 520 1.7.7-160105. Affected is the function sub_44EFB4 of the file /goform/formReleaseConnect of the component Web Management Interface. The manipulation of the argument Isp_Name results in os command injection. The attack can be launched remotely. The exploit is now public and may be used.
CVSS 7.2
bn.js <5.2.3 - DoS
This affects versions of the package bn.js before 5.2.3. Calling maskn(0) on any BN instance corrupts the internal state, causing toString(), divmod(), and other methods to enter an infinite loop, hanging the process indefinitely.
CVSS 5.3
bn.js <5.2.3 - DoS
This affects versions of the package bn.js before 5.2.3. Calling maskn(0) on any BN instance corrupts the internal state, causing toString(), divmod(), and other methods to enter an infinite loop, hanging the process indefinitely.
CVSS 5.3
Comfast CF-E7 2.6.0.9 - Command Injection
A vulnerability was detected in Comfast CF-E7 2.6.0.9. The impacted element is the function sub_41ACCC of the file /cgi-bin/mbox-config?method=SET§ion=ntp_timezone of the component webmggnt. Performing a manipulation of the argument timestr results in command injection. The attack is possible to be carried out remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
CVSS 6.3
Comfast CF-E7 2.6.0.9 - Command Injection
A flaw has been found in Comfast CF-E7 2.6.0.9. This affects the function sub_441CF4 of the file /cgi-bin/mbox-config?method=SET§ion=ping_config of the component webmggnt. Executing a manipulation of the argument destination can lead to command injection. The attack may be performed from remote. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
CVSS 6.3
sigstore cosign < 3.0.5 - Improper Certificate Validation
Cosign provides code signing and transparency for containers and binaries. In versions 3.0.4 and below, an issuing certificate with a validity that expires before the leaf certificate will be considered valid during verification even if the provided timestamp would mean the issuing certificate should be considered expired. When verifying artifact signatures using a certificate, Cosign first verifies the certificate chain using the leaf certificate's "not before" timestamp and later checks expiry of the leaf certificate using either a signed timestamp provided by the Rekor transparency log or from a timestamp authority, or using the current time. The root and all issuing certificates are assumed to be valid during the leaf certificate's validity. There is no impact to users of the public Sigstore infrastructure. This may affect private deployments with customized PKIs. This issue has been fixed in version 3.0.5.
CVSS 3.7
calibre < 9.3.0 - Path Traversal and Remote Code Execution via extract_pictures Function
calibre is a cross-platform e-book manager for viewing, converting, editing, and cataloging e-books. Versions 9.2.1 and below contain a Path Traversal vulnerability that allows arbitrary file writes anywhere the user has write permissions. On Windows, this leads to Remote Code Execution by writing a payload to the Startup folder, which executes on next login. Function extract_pictures only checks startswith('Pictures'), and does not sanitize '..' sequences. calibre's own ZipFile.extractall() in utils/zipfile.py does sanitize '..' via _get_targetpath(), but extract_pictures() bypasses this by using manual zf.read() + open(). This issue has been fixed in version 9.3.0.
CVSS 8.8
calibre < 9.3.0 - Path Traversal and Arbitrary File Write via PDB Reader
calibre is a cross-platform e-book manager for viewing, converting, editing, and cataloging e-books. Versions 9.2.1 and below are vulnerable to Path Traversal through PDB readers (both 132-byte and 202-byte header variants) that allow arbitrary file writes with arbitrary extension and arbitrary content anywhere the user has write permissions. Files are written in 'wb' mode, silently overwriting existing files. This can lead to potential code execution and Denial of Service through file corruption. This issue has been fixed in version 9.3.0.
CVSS 8.8
OpenClaw < 2026.2.14 - Unauthenticated Webhook Spoofing via Missing Telnyx Signature Verification
OpenClaw is a personal AI assistant. Versions 2026.2.13 and below allow the optional @openclaw/voice-call plugin Telnyx webhook handler to accept unsigned inbound webhook requests when telnyx.publicKey is not configured, enabling unauthenticated callers to forge Telnyx events. Telnyx webhooks are expected to be authenticated via Ed25519 signature verification. In affected versions, TelnyxProvider.verifyWebhook() could effectively fail open when no Telnyx public key was configured, allowing arbitrary HTTP POST requests to the voice-call webhook endpoint to be treated as legitimate Telnyx events. This only impacts deployments where the Voice Call plugin is installed, enabled, and the webhook endpoint is reachable from the attacker (for example, publicly exposed via a tunnel/proxy). The issue has been fixed in version 2026.2.14.
CVSS 7.5
OpenClaw macOS 2026.2.6-2026.2.13 - Command Injection
OpenClaw is a personal AI assistant. OpenClaw macOS desktop client registers the `openclaw://` URL scheme. For `openclaw://agent` deep links without an unattended `key`, the app shows a confirmation dialog that previously displayed only the first 240 characters of the message, but executed the full message after the user clicked "Run." At the time of writing, the OpenClaw macOS desktop client is still in beta. In versions 2026.2.6 through 2026.2.13, an attacker could pad the message with whitespace to push a malicious payload outside the visible preview, increasing the chance a user approves a different message than the one that is actually executed. If a user runs the deep link, the agent may perform actions that can lead to arbitrary command execution depending on the user's configured tool approvals/allowlists. This is a social-engineering mediated vulnerability: the confirmation prompt could be made to misrepresent the executed message. The issue is fixed in 2026.2.14. Other mitigations include not approve unexpected "Run OpenClaw agent?" prompts triggered while browsing untrusted sites and usingunattended deep links only with a valid `key` for trusted personal automations.
CVSS 6.5
OpenClaw <2026.2.14 - Path Traversal
OpenClaw is a personal AI assistant. Prior to OpenClaw version 2026.2.14, the Feishu extension previously allowed `sendMediaFeishu` to treat attacker-controlled `mediaUrl` values as local filesystem paths and read them directly. If an attacker can influence tool calls (directly or via prompt injection), they may be able to exfiltrate local files by supplying paths such as `/etc/passwd` as `mediaUrl`. Upgrade to OpenClaw `2026.2.14` or newer to receive a fix. The fix removes direct local file reads from this path and routes media loading through hardened helpers that enforce local-root restrictions.
CVSS 7.5
OpenClaw < 2026.2.14 - Server-Side Request Forgery via Gateway Tool URL Override
OpenClaw is a personal AI assistant. Prior to OpenClaw version 2026.2.14, the Gateway tool accepted a tool-supplied `gatewayUrl` without sufficient restrictions, which could cause the OpenClaw host to attempt outbound WebSocket connections to user-specified targets. This requires the ability to invoke tools that accept `gatewayUrl` overrides (directly or indirectly). In typical setups this is limited to authenticated operators, trusted automation, or environments where tool calls are exposed to non-operators. In other words, this is not a drive-by issue for arbitrary internet users unless a deployment explicitly allows untrusted users to trigger these tool calls. Some tool call paths allowed `gatewayUrl` overrides to flow into the Gateway WebSocket client without validation or allowlisting. This meant the host could be instructed to attempt connections to non-gateway endpoints (for example, localhost services, private network addresses, or cloud metadata IPs). In the common case, this results in an outbound connection attempt from the OpenClaw host (and corresponding errors/timeouts). In environments where the tool caller can observe the results, this can also be used for limited network reachability probing. If the target speaks WebSocket and is reachable, further interaction may be possible. Starting in version 2026.2.14, tool-supplied `gatewayUrl` overrides are restricted to loopback (on the configured gateway port) or the configured `gateway.remote.url`. Disallowed protocols, credentials, query/hash, and non-root paths are rejected.
CVSS 7.6
OpenClaw 2026.1.8-2026.2.13 - Command Injection
OpenClaw is a personal AI assistant. Versions 2026.1.8 through 2026.2.13 have a command injection in the maintainer/dev script `scripts/update-clawtributors.ts`. The issue affects contributors/maintainers (or CI) who run `bun scripts/update-clawtributors.ts` in a source checkout that contains a malicious commit author email (e.g. crafted `@users[.]noreply[.]github[.]com` values). Normal CLI usage is not affected (`npm i -g openclaw`): this script is not part of the shipped CLI and is not executed during routine operation. The script derived a GitHub login from `git log` author metadata and interpolated it into a shell command (via `execSync`). A malicious commit record could inject shell metacharacters and execute arbitrary commands when the script is run. Version 2026.2.14 contains a patch.
CVSS 8.8
OpenClaw < 2026.2.14 - Server-Side Request Forgery via IPv6 Literal Bypass
OpenClaw is a personal AI assistant. Prior to version 2026.2.14, OpenClaw's SSRF protection could be bypassed using full-form IPv4-mapped IPv6 literals such as `0:0:0:0:0:ffff:7f00:1` (which is `127.0.0.1`). This could allow requests that should be blocked (loopback / private network / link-local metadata) to pass the SSRF guard. Version 2026.2.14 patches the issue.
CVSS 7.5
OpenClaw <2026.2.14 - Command Injection
OpenClaw is a personal AI assistant. Prior to version 2026.2.14, a mismatch between `rawCommand` and `command[]` in the node host `system.run` handler could cause allowlist/approval evaluation to be performed on one command while executing a different argv. This only impacts deployments that use the node host / companion node execution path (`system.run` on a node), enable allowlist-based exec policy (`security=allowlist`) with approval prompting driven by allowlist misses (for example `ask=on-miss`), allow an attacker to invoke `system.run`. Default/non-node configurations are not affected. Version 2026.2.14 enforces `rawCommand`/`command[]` consistency (gateway fail-fast + node host validation).
CVSS 7.2
OpenClaw <2026.2.14 - Info Disclosure
OpenClaw is a personal AI assistant. Prior to version 2026.2.14, `skills.status` could disclose secrets to `operator.read` clients by returning raw resolved config values in `configChecks` for skill `requires.config` paths. Version 2026.2.14 stops including raw resolved config values in requirement checks (return only `{ path, satisfied }`) and narrows the Discord skill requirement to the token key. In addition to upgrading, users should rotate any Discord tokens that may have been exposed to read-scoped clients.
CVSS 4.3
OpenClaw < 2026.2.14 - Unauthenticated TLS Certificate Pinning Bypass via Discovery Beacon TXT Records
OpenClaw is a personal AI assistant. Discovery beacons (Bonjour/mDNS and DNS-SD) include TXT records such as `lanHost`, `tailnetDns`, `gatewayPort`, and `gatewayTlsSha256`. TXT records are unauthenticated. Prior to version 2026.2.14, some clients treated TXT values as authoritative routing/pinning inputs. iOS and macOS used TXT-provided host hints (`lanHost`/`tailnetDns`) and ports (`gatewayPort`) to build the connection URL. iOS and Android allowed the discovery-provided TLS fingerprint (`gatewayTlsSha256`) to override a previously stored TLS pin. On a shared/untrusted LAN, an attacker could advertise a rogue `_openclaw-gw._tcp` service. This could cause a client to connect to an attacker-controlled endpoint and/or accept an attacker certificate, potentially exfiltrating Gateway credentials (`auth.token` / `auth.password`) during connection. As of time of publication, the iOS and Android apps are alpha/not broadly shipped (no public App Store / Play Store release). Practical impact is primarily limited to developers/testers running those builds, plus any other shipped clients relying on discovery on a shared/untrusted LAN. Version 2026.2.14 fixes the issue. Clients now prefer the resolved service endpoint (SRV + A/AAAA) over TXT-provided routing hints. Discovery-provided fingerprints no longer override stored TLS pins. In iOS/Android, first-time TLS pins require explicit user confirmation (fingerprint shown; no silent TOFU) and discovery-based direct connects are TLS-only. In Android, hostname verification is no longer globally disabled (only bypassed when pinning).
CVSS 6.5
OpenClaw <2026.2.14 - Privilege Escalation
OpenClaw is a personal AI assistant. Prior to version 2026.2.14, under iMessage `groupPolicy=allowlist`, group authorization could be satisfied by sender identities coming from the DM pairing store, broadening DM trust into group contexts. Version 2026.2.14 fixes the issue.
CVSS 6.5
OpenClaw <2026.2.14 - Path Traversal
OpenClaw is a personal AI assistant. Prior to version 2026.2.14, authenticated attackers can read arbitrary files from the Gateway host by supplying absolute paths or path traversal sequences to the browser tool's `upload` action. The server passed these paths to Playwright's `setInputFiles()` APIs without restricting them to a safe root. An attacker must reach the Gateway HTTP surface (or otherwise invoke the same browser control hook endpoints); present valid Gateway auth (bearer token / password), as required by the Gateway configuration (In common default setups, the Gateway binds to loopback and the onboarding wizard generates a gateway token even for loopback); and have the `browser` tool permitted by tool policy for the target session/context (and have browser support enabled). If an operator exposes the Gateway beyond loopback (LAN/tailnet/custom bind, reverse proxy, tunnels, etc.), the impact increases accordingly. Starting in version 2026.2.14, the upload paths are now confined to OpenClaw's temp uploads root (`DEFAULT_UPLOAD_DIR`) and traversal/escape paths are rejected.
CVSS 6.5
Pi-hole web_interface < 6.4.1 - Authenticated Stored HTML Injection via DNS Records Configuration
Pi-hole Admin Interface is a web interface for managing Pi-hole, a network-level ad and internet tracker blocking application. Versions 6.4 and below are vulnerable to stored HTML injection through the local DNS records configuration page, which allows an authenticated administrator to inject code that is stored in the Pi-hole configuration and rendered every time the DNS records table is viewed. The populateDataTable() function contains a data variable with the full DNS record value exactly as entered by the user and returned by the API. This value is inserted directly into the data-tag HTML attribute without any escaping or sanitization of special characters. When an attacker supplies a value containing double quotes ("), they can prematurely “close” the data-tag attribute and inject additional HTML attributes into the element. Since Pi-hole implements a Content Security Policy (CSP) that blocks inline JavaScript, the impact is limited. This issue has been fixed in version 6.4.1.
CVSS 5.4
Pi-hole Web Interface 6.0-6.4.1 - Authenticated Stored HTML Injection via X-Forwarded-For Header
Pi-hole Admin Interface is a web interface for managing Pi-hole, a network-level ad and internet tracker blocking application. Versions 6.0 and above have a Stored HTML Injection vulnerability in the active sessions table located on the API settings page, allowing an attacker with valid credentials to inject arbitrary HTML code that will be rendered in the browser of any administrator who visits the active sessions page. The rowCallback function contains the value data.x_forwarded_for, which is directly concatenated into an HTML string and inserted into the DOM using jQuery’s .html() method. This method interprets the content as HTML, which means that any HTML tags present in the value will be parsed and rendered by the browser. An attacker can use common tools such as curl, wget, Python requests, Burp Suite, or even JavaScript fetch() to send an authentication request with an X-Forwarded-For header that contains malicious HTML code instead of a legitimate IP address. Since Pi-hole implements a Content Security Policy (CSP) that blocks inline JavaScript, the impact is limited to pure HTML injection without the ability to execute scripts. This issue has been fixed in version 6.4.1.
CVSS 5.4
Libredesk <1.0.2-0.20260215211005-727213631ce6 - SSRF
Libredesk is a self-hosted customer support desk application. Versions prior to 1.0.2-0.20260215211005-727213631ce6 fail to validate destination URLs for webhooks, allowing an attacker posing as an authenticated "Application Admin" to force the server to make HTTP requests to arbitrary internal destinations. This could compromise the underlying cloud infrastructure or internal corporate network where the service is hosted. This issue has been fixed in version 1.0.2-0.20260215211005-727213631ce6.
filippo.io/edwards25519 <=1.1.0 - Memory Corruption
filippo.io/edwards25519 is a Go library implementing the edwards25519 elliptic curve with APIs for building cryptographic primitives. In versions 1.1.0 and earlier, MultiScalarMult produces invalid results or undefined behavior if the receiver is not the identity point. If (*Point).MultiScalarMult is called on an initialized point that is not the identity point, it returns an incorrect result. If the method is called on an uninitialized point, the behavior is undefined. In particular, if the receiver is the zero value, MultiScalarMult returns an invalid point that compares Equal to every other point. Note that MultiScalarMult is a rarely used, advanced API. For example, users who depend on filippo.io/edwards25519 only through github.com/go-sql-driver/mysql are not affected. This issue has been fixed in version 1.1.1.
ADB Explorer <=0.9.26020 - Command Injection
ADB Explorer is a fluent UI for ADB on Windows. Versions 0.9.26020 and below fail to validate the integrity or authenticity of the ADB binary path specified in the ManualAdbPath setting before executing it, allowing arbitrary code execution with the privileges of the current user. An attacker can exploit this by crafting a malicious App.txt settings file that points ManualAdbPath to an arbitrary executable, then convincing a victim to launch the application with a command-line argument directing it to the malicious configuration directory. This vulnerability could be leveraged through social engineering tactics, such as distributing a shortcut bundled with a crafted settings file in an archive, resulting in RCE upon application startup. Thus issue has been fixed in version 0.9.26021.
CVSS 7.8
tar < 7.5.8 - Arbitrary File Read and Write via Hardlink Extraction
node-tar is a full-featured Tar for Node.js. When using default options in versions 7.5.7 and below, an attacker-controlled archive can create a hardlink inside the extraction directory that points to a file outside the extraction root, enabling arbitrary file read and write as the extracting user. Severity is high because the primitive bypasses path protections and turns archive extraction into a direct filesystem access primitive. This issue has been fixed in version 7.5.8.
CVSS 7.1
By Source