CVE & Exploit Intelligence Database

CVE-2025-37807 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix kmemleak warning for percpu hashmap Vlad Poenaru reported the following kmemleak issue: unreferenced object 0x606fd7c44ac8 (size 32): backtrace (crc 0): pcpu_alloc_noprof+0x730/0xeb0 bpf_map_alloc_percpu+0x69/0xc0 prealloc_init+0x9d/0x1b0 htab_map_alloc+0x363/0x510 map_create+0x215/0x3a0 __sys_bpf+0x16b/0x3e0 __x64_sys_bpf+0x18/0x20 do_syscall_64+0x7b/0x150 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Further investigation shows the reason is due to not 8-byte aligned store of percpu pointer in htab_elem_set_ptr(): *(void __percpu **)(l->key + key_size) = pptr; Note that the whole htab_elem alignment is 8 (for x86_64). If the key_size is 4, that means pptr is stored in a location which is 4 byte aligned but not 8 byte aligned. In mm/kmemleak.c, scan_block() scans the memory based on 8 byte stride, so it won't detect above pptr, hence reporting the memory leak. In htab_map_alloc(), we already have htab->elem_size = sizeof(struct htab_elem) + round_up(htab->map.key_size, 8); if (percpu) htab->elem_size += sizeof(void *); else htab->elem_size += round_up(htab->map.value_size, 8); So storing pptr with 8-byte alignment won't cause any problem and can fix kmemleak too. The issue can be reproduced with bpf selftest as well: 1. Enable CONFIG_DEBUG_KMEMLEAK config 2. Add a getchar() before skel destroy in test_hash_map() in prog_tests/for_each.c. The purpose is to keep map available so kmemleak can be detected. 3. run './test_progs -t for_each/hash_map &' and a kmemleak should be reported.

CWE-401 May 08, 2025

CVE-2025-22886 3.3 LOW EPSS 0.00

in OpenHarmony v5.0.3 and prior versions allow a local attacker case DOS through missing release of memory.

CWE-401 May 06, 2025

CVE-2025-1992 5.3 MEDIUM EPSS 0.00

IBM Db2 for Linux, UNIX and Windows (includes DB2 Connect Server) 11.5.0 through 11.5.9 and 12.1.0 through 12.1.1 could allow an authenticated user in federation environment, to cause a denial of service due to insufficient release of allocated memory after usage.

CWE-401 May 05, 2025

CVE-2023-53140 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: scsi: core: Remove the /proc/scsi/${proc_name} directory earlier Remove the /proc/scsi/${proc_name} directory earlier to fix a race condition between unloading and reloading kernel modules. This fixes a bug introduced in 2009 by commit 77c019768f06 ("[SCSI] fix /proc memory leak in the SCSI core"). Fix the following kernel warning: proc_dir_entry 'scsi/scsi_debug' already registered WARNING: CPU: 19 PID: 27986 at fs/proc/generic.c:376 proc_register+0x27d/0x2e0 Call Trace: proc_mkdir+0xb5/0xe0 scsi_proc_hostdir_add+0xb5/0x170 scsi_host_alloc+0x683/0x6c0 sdebug_driver_probe+0x6b/0x2d0 [scsi_debug] really_probe+0x159/0x540 __driver_probe_device+0xdc/0x230 driver_probe_device+0x4f/0x120 __device_attach_driver+0xef/0x180 bus_for_each_drv+0xe5/0x130 __device_attach+0x127/0x290 device_initial_probe+0x17/0x20 bus_probe_device+0x110/0x130 device_add+0x673/0xc80 device_register+0x1e/0x30 sdebug_add_host_helper+0x1a7/0x3b0 [scsi_debug] scsi_debug_init+0x64f/0x1000 [scsi_debug] do_one_initcall+0xd7/0x470 do_init_module+0xe7/0x330 load_module+0x122a/0x12c0 __do_sys_finit_module+0x124/0x1a0 __x64_sys_finit_module+0x46/0x50 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0

CWE-401 May 02, 2025

CVE-2023-53132 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix mpi3mr_hba_port memory leak in mpi3mr_remove() Free mpi3mr_hba_port at .remove.

CWE-401 May 02, 2025

CVE-2023-53131 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix a server shutdown leak Fix a race where kthread_stop() may prevent the threadfn from ever getting called. If that happens the svc_rqst will not be cleaned up.

CWE-401 May 02, 2025

CVE-2023-53128 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix throttle_groups memory leak Add a missing kfree().

CWE-401 May 02, 2025

CVE-2023-53127 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix expander node leak in mpi3mr_remove() Add a missing resource clean up in .remove.

CWE-401 May 02, 2025

CVE-2023-53126 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix sas_hba.phy memory leak in mpi3mr_remove() Free mrioc->sas_hba.phy at .remove.

CWE-401 May 02, 2025

CVE-2023-53125 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: net: usb: smsc75xx: Limit packet length to skb->len Packet length retrieved from skb data may be larger than the actual socket buffer length (up to 9026 bytes). In such case the cloned skb passed up the network stack will leak kernel memory contents.

CWE-401 May 02, 2025

CVE-2023-53120 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix config page DMA memory leak A fix for: DMA-API: pci 0000:83:00.0: device driver has pending DMA allocations while released from device [count=1]

CWE-401 May 02, 2025

CVE-2023-53115 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix memory leaks in mpi3mr_init_ioc() Don't allocate memory again when IOC is being reinitialized.

CWE-401 May 02, 2025

CVE-2023-53097 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: powerpc/iommu: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

CWE-401 May 02, 2025

CVE-2023-53096 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: interconnect: fix mem leak when freeing nodes The node link array is allocated when adding links to a node but is not deallocated when nodes are destroyed.

CWE-401 May 02, 2025

CVE-2023-53092 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: interconnect: exynos: fix node leak in probe PM QoS error path Make sure to add the newly allocated interconnect node to the provider before adding the PM QoS request so that the node is freed on errors.

CWE-401 May 02, 2025

CVE-2023-53078 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_dh_alua: Fix memleak for 'qdata' in alua_activate() If alua_rtpg_queue() failed from alua_activate(), then 'qdata' is not freed, which will cause following memleak: unreferenced object 0xffff88810b2c6980 (size 32): comm "kworker/u16:2", pid 635322, jiffies 4355801099 (age 1216426.076s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 40 39 24 c1 ff ff ff ff 00 f8 ea 0a 81 88 ff ff @9$............. backtrace: [<0000000098f3a26d>] alua_activate+0xb0/0x320 [<000000003b529641>] scsi_dh_activate+0xb2/0x140 [<000000007b296db3>] activate_path_work+0xc6/0xe0 [dm_multipath] [<000000007adc9ace>] process_one_work+0x3c5/0x730 [<00000000c457a985>] worker_thread+0x93/0x650 [<00000000cb80e628>] kthread+0x1ba/0x210 [<00000000a1e61077>] ret_from_fork+0x22/0x30 Fix the problem by freeing 'qdata' in error path.

CWE-401 May 02, 2025

CVE-2023-53069 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: octeontx2-vf: Add missing free for alloc_percpu Add the free_percpu for the allocated "vf->hw.lmt_info" in order to avoid memory leak, same as the "pf->hw.lmt_info" in `drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c`.

CWE-401 May 02, 2025

CVE-2023-53068 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: net: usb: lan78xx: Limit packet length to skb->len Packet length retrieved from descriptor may be larger than the actual socket buffer length. In such case the cloned skb passed up the network stack will leak kernel memory contents. Additionally prevent integer underflow when size is less than ETH_FCS_LEN.

CWE-401 May 02, 2025

CVE-2023-53062 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: net: usb: smsc95xx: Limit packet length to skb->len Packet length retrieved from descriptor may be larger than the actual socket buffer length. In such case the cloned skb passed up the network stack will leak kernel memory contents.

CWE-401 May 02, 2025

CVE-2023-53054 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: fix a devres leak in hw_enable upon suspend resume Each time the platform goes to low power, PM suspend / resume routines call: __dwc2_lowlevel_hw_enable -> devm_add_action_or_reset(). This adds a new devres each time. This may also happen at runtime, as dwc2_lowlevel_hw_enable() can be called from udc_start(). This can be seen with tracing: - echo 1 > /sys/kernel/debug/tracing/events/dev/devres_log/enable - go to low power - cat /sys/kernel/debug/tracing/trace A new "ADD" entry is found upon each low power cycle: ... devres_log: 49000000.usb-otg ADD 82a13bba devm_action_release (8 bytes) ... devres_log: 49000000.usb-otg ADD 49889daf devm_action_release (8 bytes) ... A second issue is addressed here: - regulator_bulk_enable() is called upon each PM cycle (suspend/resume). - regulator_bulk_disable() never gets called. So the reference count for these regulators constantly increase, by one upon each low power cycle, due to missing regulator_bulk_disable() call in __dwc2_lowlevel_hw_disable(). The original fix that introduced the devm_add_action_or_reset() call, fixed an issue during probe, that happens due to other errors in dwc2_driver_probe() -> dwc2_core_reset(). Then the probe fails without disabling regulators, when dr_mode == USB_DR_MODE_PERIPHERAL. Rather fix the error path: disable all the low level hardware in the error path, by using the "hsotg->ll_hw_enabled" flag. Checking dr_mode has been introduced to avoid a dual call to dwc2_lowlevel_hw_disable(). "ll_hw_enabled" should achieve the same (and is used currently in the remove() routine).

CWE-401 May 02, 2025