Ruby Exploits
6,001 exploits tracked across all sources.
Poly Voice – Possible Remote Control of Certain Poly Devices
In certain scenarios when the admin has enabled Interactive Connectivity Establishment (ICE), a buffer overflow could enable
remote code execution on Poly Voice products on the Linux platform.
Poly Voice – Possible Remote Control of Certain Poly Devices
In certain scenarios when the admin has enabled Interactive Connectivity Establishment (ICE), a buffer overflow could enable
remote code execution on Poly Voice products on the Linux platform.
by sfewer-r7
HP-UX - Unauthenticated Remote Login via Default Null Password
A Unix account has a default, null, blank, or missing password.
by jduck
D-Link DIR-859 1.05 and 1.06B01 - Unauthenticated OS Command Injection via M-SEARCH Method
D-Link DIR-859 1.05 and 1.06B01 Beta01 devices allow remote attackers to execute arbitrary OS commands via a urn: to the M-SEARCH method in ssdpcgi() in /htdocs/cgibin, because HTTP_ST is mishandled. The value of the urn: service/device is checked with the strstr function, which allows an attacker to concatenate arbitrary commands separated by shell metacharacters.
CVSS 9.8
D-Link DIR-600 <2.18 - Command Injection
D-Link DIR-600 Hardware Version B5, Firmware Version 2.18 was discovered to contain a command injection vulnerability via the ST parameter in the lxmldbc_system() function.
CVSS 9.8
Cisco IOS XE - Authenticated OS Command Injection via Web UI
A vulnerability in the web UI feature of Cisco IOS XE Software could allow an authenticated, remote attacker to inject commands with the privileges of root. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to inject commands to the underlying operating system with root privileges.
by sfewer-r7
CVSS 7.2
Lenovo ThinkManagement Console 9.0.3 - Path Traversal and Arbitrary File Deletion via VulCore Web Service
Directory traversal vulnerability in the VulCore web service (WSVulnerabilityCore/VulCore.asmx) in Lenovo ThinkManagement Console 9.0.3 allows remote attackers to delete arbitrary files via a .. (dot dot) in the filename parameter in a SetTaskLogByFile SOAP request.
by Andrea Micalizzi, juan vazquez
Oracle Communications Application Session Controller 3.0.0-3.9.1 - Inadequate Encryption Strength via RC4 Algorithm
The RC4 algorithm, as used in the TLS protocol and SSL protocol, has many single-byte biases, which makes it easier for remote attackers to conduct plaintext-recovery attacks via statistical analysis of ciphertext in a large number of sessions that use the same plaintext.
by todb, et, Chris John Riley
CVSS 5.9
SSL - Info Disclosure
The SSL protocol, as used in certain configurations in Microsoft Windows and Microsoft Internet Explorer, Mozilla Firefox, Google Chrome, Opera, and other products, encrypts data by using CBC mode with chained initialization vectors, which allows man-in-the-middle attackers to obtain plaintext HTTP headers via a blockwise chosen-boundary attack (BCBA) on an HTTPS session, in conjunction with JavaScript code that uses (1) the HTML5 WebSocket API, (2) the Java URLConnection API, or (3) the Silverlight WebClient API, aka a "BEAST" attack.
by todb, et, Chris John Riley
OpenSSL <1.0.1s, 1.0.2 before 1.0.2g - RCE
The SSLv2 protocol, as used in OpenSSL before 1.0.1s and 1.0.2 before 1.0.2g and other products, requires a server to send a ServerVerify message before establishing that a client possesses certain plaintext RSA data, which makes it easier for remote attackers to decrypt TLS ciphertext data by leveraging a Bleichenbacher RSA padding oracle, aka a "DROWN" attack.
by todb, et, Chris John Riley
CVSS 5.9
OpenSSL 3.0.0-3.0.5 - NULL Pointer Dereference via Legacy Custom Cipher Handling
OpenSSL supports creating a custom cipher via the legacy EVP_CIPHER_meth_new() function and associated function calls. This function was deprecated in OpenSSL 3.0 and application authors are instead encouraged to use the new provider mechanism in order to implement custom ciphers. OpenSSL versions 3.0.0 to 3.0.5 incorrectly handle legacy custom ciphers passed to the EVP_EncryptInit_ex2(), EVP_DecryptInit_ex2() and EVP_CipherInit_ex2() functions (as well as other similarly named encryption and decryption initialisation functions). Instead of using the custom cipher directly it incorrectly tries to fetch an equivalent cipher from the available providers. An equivalent cipher is found based on the NID passed to EVP_CIPHER_meth_new(). This NID is supposed to represent the unique NID for a given cipher. However it is possible for an application to incorrectly pass NID_undef as this value in the call to EVP_CIPHER_meth_new(). When NID_undef is used in this way the OpenSSL encryption/decryption initialisation function will match the NULL cipher as being equivalent and will fetch this from the available providers. This will succeed if the default provider has been loaded (or if a third party provider has been loaded that offers this cipher). Using the NULL cipher means that the plaintext is emitted as the ciphertext. Applications are only affected by this issue if they call EVP_CIPHER_meth_new() using NID_undef and subsequently use it in a call to an encryption/decryption initialisation function. Applications that only use SSL/TLS are not impacted by this issue. Fixed in OpenSSL 3.0.6 (Affected 3.0.0-3.0.5).
by todb, et, Chris John Riley
CVSS 7.5
OpenSSL 1.0.1-1.0.1l - Man-in-the-Middle Cipher Downgrade via DHE_EXPORT
The TLS protocol 1.2 and earlier, when a DHE_EXPORT ciphersuite is enabled on a server but not on a client, does not properly convey a DHE_EXPORT choice, which allows man-in-the-middle attackers to conduct cipher-downgrade attacks by rewriting a ClientHello with DHE replaced by DHE_EXPORT and then rewriting a ServerHello with DHE_EXPORT replaced by DHE, aka the "Logjam" issue.
by todb, et, Chris John Riley
CVSS 3.7
Xerte Online Toolkits Path Traversal via connector.php
Xerte Online Toolkits versions 3.15 and earlier contain a relative path traversal vulnerability in the elFinder connector endpoint at /editor/elfinder/php/connector.php where the name parameter in rename commands is not sanitized for path traversal sequences. Attackers can supply a name value containing directory traversal sequences to move files from project media directories to arbitrary locations on the filesystem, potentially overwriting application files, achieving stored cross-site scripting, or combining with other vulnerabilities to achieve unauthenticated remote code execution by moving PHP code files to the application root.
CVSS 7.1
Xerte Online Toolkits File Upload RCE via elfinder Connector
Xerte Online Toolkits versions 3.15 and earlier contain an incomplete input validation vulnerability in the elFinder connector endpoint that fails to block PHP-executable extensions .php4 due to an incorrect regex pattern. Unauthenticated attackers can exploit this flaw combined with authentication bypass and path traversal vulnerabilities to upload malicious PHP code, rename it with a .php4 extension, and execute arbitrary operating system commands on the server.
CVSS 9.8
Xerte Online Toolkits Missing Authentication via connector.php
Xerte Online Toolkits versions 3.15 and earlier contain a missing authentication vulnerability in the elFinder connector endpoint at /editor/elfinder/php/connector.php where an HTTP redirect to unauthenticated callers does not call exit() or die(), allowing PHP execution to continue and process the full request server-side. Unauthenticated attackers can perform file operations on project media directories including creating directories, uploading files, renaming files, duplicating files, overwriting files, and deleting files, which can be chained with path traversal and extension blocklist vulnerabilities to achieve remote code execution and arbitrary file read.
CVSS 8.6
Xerte Online Toolkits Path Disclosure via /setup
Xerte Online Toolkits versions 3.15 and earlier contain an information disclosure vulnerability that allows unauthenticated attackers to retrieve the full server-side filesystem path of the application root. Attackers can send a GET request to the /setup page to access the exposed root_path value rendered in the HTML response, which enables exploitation of path-dependent vulnerabilities such as relative path traversal in connector.php.
CVSS 5.3
ptrace: slightly saner 'get_dumpable()' logic
In the Linux kernel, the following vulnerability has been resolved:
ptrace: slightly saner 'get_dumpable()' logic
The 'dumpability' of a task is fundamentally about the memory image of
the task - the concept comes from whether it can core dump or not - and
makes no sense when you don't have an associated mm.
And almost all users do in fact use it only for the case where the task
has a mm pointer.
But we have one odd special case: ptrace_may_access() uses 'dumpable' to
check various other things entirely independently of the MM (typically
explicitly using flags like PTRACE_MODE_READ_FSCREDS). Including for
threads that no longer have a VM (and maybe never did, like most kernel
threads).
It's not what this flag was designed for, but it is what it is.
The ptrace code does check that the uid/gid matches, so you do have to
be uid-0 to see kernel thread details, but this means that the
traditional "drop capabilities" model doesn't make any difference for
this all.
Make it all make a *bit* more sense by saying that if you don't have a
MM pointer, we'll use a cached "last dumpability" flag if the thread
ever had a MM (it will be zero for kernel threads since it is never
set), and require a proper CAP_SYS_PTRACE capability to override.
by 0xdeadbeefnetwork, bhaskarbhar
CVSS 7.1
Paperclip Vulnerable to Unauthenticated Remote Code Execution via Import Authorization Bypass
Paperclip is a Node.js server and React UI that orchestrates a team of AI agents to run a business. Prior to version 2026.416.0, an unauthenticated attacker can achieve full remote code execution on any network-accessible Paperclip instance running in `authenticated` mode with default configuration. No user interaction, no credentials, just the target's address. The chain consists of six API calls. The attack is fully automated, requires no user interaction, and works against the default deployment configuration. Version 2026.416.0 patches the issue.
CVSS 10.0
Mail Server - Info Disclosure
A mail server is explicitly configured to allow SMTP mail relay, which allows abuse by spammers.
by Campbell Murray
Exim < 4.70 - Remote Code Execution via Crafted SMTP Headers
Heap-based buffer overflow in the string_vformat function in string.c in Exim before 4.70 allows remote attackers to execute arbitrary code via an SMTP session that includes two MAIL commands in conjunction with a large message containing crafted headers, leading to improper rejection logging.
by jduck, hdm
CVSS 9.8
Ruby on Rails JSON Processor YAML Deserialization Code Execution
active_support/core_ext/hash/conversions.rb in Ruby on Rails before 2.3.15, 3.0.x before 3.0.19, 3.1.x before 3.1.10, and 3.2.x before 3.2.11 does not properly restrict casts of string values, which allows remote attackers to conduct object-injection attacks and execute arbitrary code, or cause a denial of service (memory and CPU consumption) involving nested XML entity references, by leveraging Action Pack support for (1) YAML type conversion or (2) Symbol type conversion.
by jjarmoc, egypt, lian
ExaGrid EX3000 Firmware - Use of Hard-coded Credentials
ExaGrid appliances with firmware before 4.8 P26 have a default password of (1) inflection for the root shell account and (2) support for the support account in the web interface, which allows remote attackers to obtain administrative access via an SSH or HTTP session.
by egypt
CVSS 9.8
Barracuda Email Security Gateway <9.2.0.006 - Command Injection
A remote command injection vulnerability exists in the Barracuda Email Security Gateway (appliance form factor only) product effecting versions 5.1.3.001-9.2.0.006. The vulnerability arises out of a failure to comprehensively sanitize the processing of .tar file (tape archives). The vulnerability stems from incomplete input validation of a user-supplied .tar file as it pertains to the names of the files contained within the archive. As a consequence, a remote attacker can specifically format these file names in a particular manner that will result in remotely executing a system command through Perl's qx operator with the privileges of the Email Security Gateway product. This issue was fixed as part of BNSF-36456 patch. This patch was automatically applied to all customer appliances.
by Mandiant, cfielding-r7, Curt Hyvarinen
CVSS 9.4
Western Digital My Cloud <2.30.196 - Auth Bypass
It was discovered that the Western Digital My Cloud device before 2.30.196 is affected by an authentication bypass vulnerability. An unauthenticated attacker can exploit this vulnerability to authenticate as an admin user without needing to provide a password, thereby gaining full control of the device. (Whenever an admin logs into My Cloud, a server-side session is created that is bound to the user's IP address. After the session is created, it is possible to call authenticated CGI modules by sending the cookie username=admin in the HTTP request. The invoked CGI will check if a valid session is present and bound to the user's IP address.) It was found that it is possible for an unauthenticated attacker to create a valid session without a login. The network_mgr.cgi CGI module contains a command called "cgi_get_ipv6" that starts an admin session -- tied to the IP address of the user making the request -- if the additional parameter "flag" with the value "1" is provided. Subsequent invocation of commands that would normally require admin privileges now succeed if an attacker sets the username=admin cookie.
by Erik Wynter, Steven Campbell, Remco Vermeulen
CVSS 9.8
TP-Link NC200/NC210/NC220/NC230/NC250/NC260/NC450 Firmware - Use of Hard-coded Encryption Key
Certain TP-Link devices have a Hardcoded Encryption Key. This affects NC200 2.1.9 build 200225, N210 1.0.9 build 200304, NC220 1.3.0 build 200304, NC230 1.3.0 build 200304, NC250 1.3.0 build 200304, NC260 1.5.2 build 200304, and NC450 1.5.3 build 200304.
CVSS 9.8
By Source