CVE & Exploit Intelligence Database

CVE-2023-53477 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: ipv6: Add lwtunnel encap size of all siblings in nexthop calculation In function rt6_nlmsg_size(), the length of nexthop is calculated by multipling the nexthop length of fib6_info and the number of siblings. However if the fib6_info has no lwtunnel but the siblings have lwtunnels, the nexthop length is less than it should be, and it will trigger a warning in inet6_rt_notify() as follows: WARNING: CPU: 0 PID: 6082 at net/ipv6/route.c:6180 inet6_rt_notify+0x120/0x130 ...... Call Trace: <TASK> fib6_add_rt2node+0x685/0xa30 fib6_add+0x96/0x1b0 ip6_route_add+0x50/0xd0 inet6_rtm_newroute+0x97/0xa0 rtnetlink_rcv_msg+0x156/0x3d0 netlink_rcv_skb+0x5a/0x110 netlink_unicast+0x246/0x350 netlink_sendmsg+0x250/0x4c0 sock_sendmsg+0x66/0x70 ___sys_sendmsg+0x7c/0xd0 __sys_sendmsg+0x5d/0xb0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc This bug can be reproduced by script: ip -6 addr add 2002::2/64 dev ens2 ip -6 route add 100::/64 via 2002::1 dev ens2 metric 100 for i in 10 20 30 40 50 60 70; do ip link add link ens2 name ipv_$i type ipvlan ip -6 addr add 2002::$i/64 dev ipv_$i ifconfig ipv_$i up done for i in 10 20 30 40 50 60; do ip -6 route append 100::/64 encap ip6 dst 2002::$i via 2002::1 dev ipv_$i metric 100 done ip -6 route append 100::/64 via 2002::1 dev ipv_70 metric 100 This patch fixes it by adding nexthop_len of every siblings using rt6_nh_nlmsg_size().

Oct 01, 2025

CVE-2023-53476 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: iw_cxgb4: Fix potential NULL dereference in c4iw_fill_res_cm_id_entry() This condition needs to match the previous "if (epcp->state == LISTEN) {" exactly to avoid a NULL dereference of either "listen_ep" or "ep". The problem is that "epcp" has been re-assigned so just testing "if (epcp->state == LISTEN) {" a second time is not sufficient.

CWE-476 Oct 01, 2025

CVE-2023-53475 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: tegra: fix sleep in atomic call When we set the dual-role port to Host mode, we observed the following splat: [ 167.057718] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:229 [ 167.057872] Workqueue: events tegra_xusb_usb_phy_work [ 167.057954] Call trace: [ 167.057962] dump_backtrace+0x0/0x210 [ 167.057996] show_stack+0x30/0x50 [ 167.058020] dump_stack_lvl+0x64/0x84 [ 167.058065] dump_stack+0x14/0x34 [ 167.058100] __might_resched+0x144/0x180 [ 167.058140] __might_sleep+0x64/0xd0 [ 167.058171] slab_pre_alloc_hook.constprop.0+0xa8/0x110 [ 167.058202] __kmalloc_track_caller+0x74/0x2b0 [ 167.058233] kvasprintf+0xa4/0x190 [ 167.058261] kasprintf+0x58/0x90 [ 167.058285] tegra_xusb_find_port_node.isra.0+0x58/0xd0 [ 167.058334] tegra_xusb_find_port+0x38/0xa0 [ 167.058380] tegra_xusb_padctl_get_usb3_companion+0x38/0xd0 [ 167.058430] tegra_xhci_id_notify+0x8c/0x1e0 [ 167.058473] notifier_call_chain+0x88/0x100 [ 167.058506] atomic_notifier_call_chain+0x44/0x70 [ 167.058537] tegra_xusb_usb_phy_work+0x60/0xd0 [ 167.058581] process_one_work+0x1dc/0x4c0 [ 167.058618] worker_thread+0x54/0x410 [ 167.058650] kthread+0x188/0x1b0 [ 167.058672] ret_from_fork+0x10/0x20 The function tegra_xusb_padctl_get_usb3_companion eventually calls tegra_xusb_find_port and this in turn calls kasprintf which might sleep and so cannot be called from an atomic context. Fix this by moving the call to tegra_xusb_padctl_get_usb3_companion to the tegra_xhci_id_work function where it is really needed.

Oct 01, 2025

CVE-2023-53474 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: x86/MCE/AMD: Use an u64 for bank_map Thee maximum number of MCA banks is 64 (MAX_NR_BANKS), see a0bc32b3cacf ("x86/mce: Increase maximum number of banks to 64"). However, the bank_map which contains a bitfield of which banks to initialize is of type unsigned int and that overflows when those bit numbers are >= 32, leading to UBSAN complaining correctly: UBSAN: shift-out-of-bounds in arch/x86/kernel/cpu/mce/amd.c:1365:38 shift exponent 32 is too large for 32-bit type 'int' Change the bank_map to a u64 and use the proper BIT_ULL() macro when modifying bits in there. [ bp: Rewrite commit message. ]

CWE-190 Oct 01, 2025

CVE-2023-53473 7.8 HIGH EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: ext4: improve error handling from ext4_dirhash() The ext4_dirhash() will *almost* never fail, especially when the hash tree feature was first introduced. However, with the addition of support of encrypted, casefolded file names, that function can most certainly fail today. So make sure the callers of ext4_dirhash() properly check for failures, and reflect the errors back up to their callers.

Oct 01, 2025

CVE-2023-53472 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: pwm: lpc32xx: Remove handling of PWM channels Because LPC32xx PWM controllers have only a single output which is registered as the only PWM device/channel per controller, it is known in advance that pwm->hwpwm value is always 0. On basis of this fact simplify the code by removing operations with pwm->hwpwm, there is no controls which require channel number as input. Even though I wasn't aware at the time when I forward ported that patch, this fixes a null pointer dereference as lpc32xx->chip.pwms is NULL before devm_pwmchip_add() is called.

CWE-476 Oct 01, 2025

CVE-2023-53471 7.8 HIGH EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx: disable gfx9 cp_ecc_error_irq only when enabling legacy gfx ras gfx9 cp_ecc_error_irq is only enabled when legacy gfx ras is assert. So in gfx_v9_0_hw_fini, interrupt disablement for cp_ecc_error_irq should be executed under such condition, otherwise, an amdgpu_irq_put calltrace will occur. [ 7283.170322] RIP: 0010:amdgpu_irq_put+0x45/0x70 [amdgpu] [ 7283.170964] RSP: 0018:ffff9a5fc3967d00 EFLAGS: 00010246 [ 7283.170967] RAX: ffff98d88afd3040 RBX: ffff98d89da20000 RCX: 0000000000000000 [ 7283.170969] RDX: 0000000000000000 RSI: ffff98d89da2bef8 RDI: ffff98d89da20000 [ 7283.170971] RBP: ffff98d89da20000 R08: ffff98d89da2ca18 R09: 0000000000000006 [ 7283.170973] R10: ffffd5764243c008 R11: 0000000000000000 R12: 0000000000001050 [ 7283.170975] R13: ffff98d89da38978 R14: ffffffff999ae15a R15: ffff98d880130105 [ 7283.170978] FS: 0000000000000000(0000) GS:ffff98d996f00000(0000) knlGS:0000000000000000 [ 7283.170981] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7283.170983] CR2: 00000000f7a9d178 CR3: 00000001c42ea000 CR4: 00000000003506e0 [ 7283.170986] Call Trace: [ 7283.170988] <TASK> [ 7283.170989] gfx_v9_0_hw_fini+0x1c/0x6d0 [amdgpu] [ 7283.171655] amdgpu_device_ip_suspend_phase2+0x101/0x1a0 [amdgpu] [ 7283.172245] amdgpu_device_suspend+0x103/0x180 [amdgpu] [ 7283.172823] amdgpu_pmops_freeze+0x21/0x60 [amdgpu] [ 7283.173412] pci_pm_freeze+0x54/0xc0 [ 7283.173419] ? __pfx_pci_pm_freeze+0x10/0x10 [ 7283.173425] dpm_run_callback+0x98/0x200 [ 7283.173430] __device_suspend+0x164/0x5f0 v2: drop gfx11 as it's fixed in a different solution by retiring cp_ecc_irq funcs(Hawking)

Oct 01, 2025

CVE-2023-53470 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: ionic: catch failure from devlink_alloc Add a check for NULL on the alloc return. If devlink_alloc() fails and we try to use devlink_priv() on the NULL return, the kernel gets very unhappy and panics. With this fix, the driver load will still fail, but at least it won't panic the kernel.

CWE-476 Oct 01, 2025

CVE-2023-53468 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: ubifs: Fix memory leak in alloc_wbufs() kmemleak reported a sequence of memory leaks, and show them as following: unreferenced object 0xffff8881575f8400 (size 1024): comm "mount", pid 19625, jiffies 4297119604 (age 20.383s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8176cecd>] __kmalloc+0x4d/0x150 [<ffffffffa0406b2b>] ubifs_mount+0x307b/0x7170 [ubifs] [<ffffffff819fa8fd>] legacy_get_tree+0xed/0x1d0 [<ffffffff81936f2d>] vfs_get_tree+0x7d/0x230 [<ffffffff819b2bd4>] path_mount+0xdd4/0x17b0 [<ffffffff819b37aa>] __x64_sys_mount+0x1fa/0x270 [<ffffffff83c14295>] do_syscall_64+0x35/0x80 [<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 unreferenced object 0xffff8881798a6e00 (size 512): comm "mount", pid 19677, jiffies 4297121912 (age 37.816s) hex dump (first 32 bytes): 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk backtrace: [<ffffffff8176cecd>] __kmalloc+0x4d/0x150 [<ffffffffa0418342>] ubifs_wbuf_init+0x52/0x480 [ubifs] [<ffffffffa0406ca5>] ubifs_mount+0x31f5/0x7170 [ubifs] [<ffffffff819fa8fd>] legacy_get_tree+0xed/0x1d0 [<ffffffff81936f2d>] vfs_get_tree+0x7d/0x230 [<ffffffff819b2bd4>] path_mount+0xdd4/0x17b0 [<ffffffff819b37aa>] __x64_sys_mount+0x1fa/0x270 [<ffffffff83c14295>] do_syscall_64+0x35/0x80 [<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 The problem is that the ubifs_wbuf_init() returns an error in the loop which in the alloc_wbufs(), then the wbuf->buf and wbuf->inodes that were successfully alloced before are not freed. Fix it by adding error hanging path in alloc_wbufs() which frees the memory alloced before when ubifs_wbuf_init() returns an error.

CWE-401 Oct 01, 2025

CVE-2023-53467 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fix potential leak in rtw89_append_probe_req_ie() Do `kfree_skb(new)` before `goto out` to prevent potential leak.

CWE-401 Oct 01, 2025

CVE-2023-53466 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: fix memory leak in mt7915_mcu_exit Always purge mcu skb queues in mt7915_mcu_exit routine even if mt7915_firmware_state fails.

CWE-401 Oct 01, 2025

CVE-2023-53465 7.1 HIGH EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: soundwire: qcom: fix storing port config out-of-bounds The 'qcom_swrm_ctrl->pconfig' has size of QCOM_SDW_MAX_PORTS (14), however we index it starting from 1, not 0, to match real port numbers. This can lead to writing port config past 'pconfig' bounds and overwriting next member of 'qcom_swrm_ctrl' struct. Reported also by smatch: drivers/soundwire/qcom.c:1269 qcom_swrm_get_port_config() error: buffer overflow 'ctrl->pconfig' 14 <= 14

CWE-125 Oct 01, 2025

CVE-2023-53464 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: scsi: iscsi_tcp: Check that sock is valid before iscsi_set_param() The validity of sock should be checked before assignment to avoid incorrect values. Commit 57569c37f0ad ("scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()") introduced this change which may lead to inconsistent values of tcp_sw_conn->sendpage and conn->datadgst_en. Fix the issue by moving the position of the assignment.

CWE-476 Oct 01, 2025

CVE-2023-53463 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: ibmvnic: Do not reset dql stats on NON_FATAL err All ibmvnic resets, make a call to netdev_tx_reset_queue() when re-opening the device. netdev_tx_reset_queue() resets the num_queued and num_completed byte counters. These stats are used in Byte Queue Limit (BQL) algorithms. The difference between these two stats tracks the number of bytes currently sitting on the physical NIC. ibmvnic increases the number of queued bytes though calls to netdev_tx_sent_queue() in the drivers xmit function. When, VIOS reports that it is done transmitting bytes, the ibmvnic device increases the number of completed bytes through calls to netdev_tx_completed_queue(). It is important to note that the driver batches its transmit calls and num_queued is increased every time that an skb is added to the next batch, not necessarily when the batch is sent to VIOS for transmission. Unlike other reset types, a NON FATAL reset will not flush the sub crq tx buffers. Therefore, it is possible for the batched skb array to be partially full. So if there is call to netdev_tx_reset_queue() when re-opening the device, the value of num_queued (0) would not account for the skb's that are currently batched. Eventually, when the batch is sent to VIOS, the call to netdev_tx_completed_queue() would increase num_completed to a value greater than the num_queued. This causes a BUG_ON crash: ibmvnic 30000002: Firmware reports error, cause: adapter problem. Starting recovery... ibmvnic 30000002: tx error 600 ibmvnic 30000002: tx error 600 ibmvnic 30000002: tx error 600 ibmvnic 30000002: tx error 600 ------------[ cut here ]------------ kernel BUG at lib/dynamic_queue_limits.c:27! Oops: Exception in kernel mode, sig: 5 [....] NIP dql_completed+0x28/0x1c0 LR ibmvnic_complete_tx.isra.0+0x23c/0x420 [ibmvnic] Call Trace: ibmvnic_complete_tx.isra.0+0x3f8/0x420 [ibmvnic] (unreliable) ibmvnic_interrupt_tx+0x40/0x70 [ibmvnic] __handle_irq_event_percpu+0x98/0x270 ---[ end trace ]--- Therefore, do not reset the dql stats when performing a NON_FATAL reset.

Oct 01, 2025

CVE-2023-53462 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: hsr: Fix uninit-value access in fill_frame_info() Syzbot reports the following uninit-value access problem. ===================================================== BUG: KMSAN: uninit-value in fill_frame_info net/hsr/hsr_forward.c:601 [inline] BUG: KMSAN: uninit-value in hsr_forward_skb+0x9bd/0x30f0 net/hsr/hsr_forward.c:616 fill_frame_info net/hsr/hsr_forward.c:601 [inline] hsr_forward_skb+0x9bd/0x30f0 net/hsr/hsr_forward.c:616 hsr_dev_xmit+0x192/0x330 net/hsr/hsr_device.c:223 __netdev_start_xmit include/linux/netdevice.h:4889 [inline] netdev_start_xmit include/linux/netdevice.h:4903 [inline] xmit_one net/core/dev.c:3544 [inline] dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3560 __dev_queue_xmit+0x34d0/0x52a0 net/core/dev.c:4340 dev_queue_xmit include/linux/netdevice.h:3082 [inline] packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3087 [inline] packet_sendmsg+0x8b1d/0x9f30 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:730 [inline] sock_sendmsg net/socket.c:753 [inline] __sys_sendto+0x781/0xa30 net/socket.c:2176 __do_sys_sendto net/socket.c:2188 [inline] __se_sys_sendto net/socket.c:2184 [inline] __ia32_sys_sendto+0x11f/0x1c0 net/socket.c:2184 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178 do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246 entry_SYSENTER_compat_after_hwframe+0x70/0x82 Uninit was created at: slab_post_alloc_hook+0x12f/0xb70 mm/slab.h:767 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x577/0xa80 mm/slub.c:3523 kmalloc_reserve+0x148/0x470 net/core/skbuff.c:559 __alloc_skb+0x318/0x740 net/core/skbuff.c:644 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6299 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2794 packet_alloc_skb net/packet/af_packet.c:2936 [inline] packet_snd net/packet/af_packet.c:3030 [inline] packet_sendmsg+0x70e8/0x9f30 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:730 [inline] sock_sendmsg net/socket.c:753 [inline] __sys_sendto+0x781/0xa30 net/socket.c:2176 __do_sys_sendto net/socket.c:2188 [inline] __se_sys_sendto net/socket.c:2184 [inline] __ia32_sys_sendto+0x11f/0x1c0 net/socket.c:2184 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178 do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246 entry_SYSENTER_compat_after_hwframe+0x70/0x82 It is because VLAN not yet supported in hsr driver. Return error when protocol is ETH_P_8021Q in fill_frame_info() now to fix it.

CWE-908 Oct 01, 2025

CVE-2023-53461 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: io_uring: wait interruptibly for request completions on exit WHen the ring exits, cleanup is done and the final cancelation and waiting on completions is done by io_ring_exit_work. That function is invoked by kworker, which doesn't take any signals. Because of that, it doesn't really matter if we wait for completions in TASK_INTERRUPTIBLE or TASK_UNINTERRUPTIBLE state. However, it does matter to the hung task detection checker! Normally we expect cancelations and completions to happen rather quickly. Some test cases, however, will exit the ring and park the owning task stopped (eg via SIGSTOP). If the owning task needs to run task_work to complete requests, then io_ring_exit_work won't make any progress until the task is runnable again. Hence io_ring_exit_work can trigger the hung task detection, which is particularly problematic if panic-on-hung-task is enabled. As the ring exit doesn't take signals to begin with, have it wait interruptibly rather than uninterruptibly. io_uring has a separate stuck-exit warning that triggers independently anyway, so we're not really missing anything by making this switch.

Oct 01, 2025

CVE-2023-53460 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: fix memory leak in rtw_usb_probe() drivers/net/wireless/realtek/rtw88/usb.c:876 rtw_usb_probe() warn: 'hw' from ieee80211_alloc_hw() not released on lines: 811 Fix this by modifying return to a goto statement.

CWE-401 Oct 01, 2025

CVE-2023-53459 7.8 HIGH EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: HID: mcp-2221: prevent UAF in delayed work If the device is plugged/unplugged without giving time for mcp_init_work() to complete, we might kick in the devm free code path and thus have unavailable struct mcp_2221 while in delayed work. Canceling the delayed_work item is enough to solve the issue, because cancel_delayed_work_sync will prevent the work item to requeue itself.

CWE-416 Oct 01, 2025

CVE-2023-53458 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: media: cx23885: Fix a null-ptr-deref bug in buffer_prepare() and buffer_finish() When the driver calls cx23885_risc_buffer() to prepare the buffer, the function call dma_alloc_coherent may fail, resulting in a empty buffer risc->cpu. Later when we free the buffer or access the buffer, null ptr deref is triggered. This bug is similar to the following one: https://git.linuxtv.org/media_stage.git/commit/?id=2b064d91440b33fba5b452f2d1b31f13ae911d71. We believe the bug can be also dynamically triggered from user side. Similarly, we fix this by checking the return value of cx23885_risc_buffer() and the value of risc->cpu before buffer free.

CWE-476 Oct 01, 2025

CVE-2023-53457 5.5 MEDIUM EPSS 0.00

In the Linux kernel, the following vulnerability has been resolved: FS: JFS: Fix null-ptr-deref Read in txBegin Syzkaller reported an issue where txBegin may be called on a superblock in a read-only mounted filesystem which leads to NULL pointer deref. This could be solved by checking if the filesystem is read-only before calling txBegin, and returning with appropiate error code.

CWE-476 Oct 01, 2025