Github Exploits
72 exploits tracked across all sources.
F5 NGINX Plus - NGINX Map Directive and Regex Matching Vulnerability
A vulnerability exists in NGINX Plus and NGINX Open Source when a map directive uses regex matching and a string expression references the map's regex capture variables before referencing the map output variable. Alternatively, the same result could be achieved by using a non-cacheable variable in a string expression under certain conditions. An unauthenticated attacker along with conditions beyond their control can exploit this vulnerability by sending crafted HTTP requests. This may cause a heap buffer overflow in the NGINX worker process leading to a restart. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR.
Impact:
This vulnerability may allow remote attackers to cause a denial-of-service (DoS) on the NGINX system or to possibly trigger a code execution. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
by gagaltotal
CVSS 8.1
rtmutex: Use waiter::task instead of current in remove_waiter()
In the Linux kernel, the following vulnerability has been resolved:
rtmutex: Use waiter::task instead of current in remove_waiter()
remove_waiter() is used by the slowlock paths, but it is also used for
proxy-lock rollback in rt_mutex_start_proxy_lock() when invoked from
futex_requeue().
In the latter case waiter::task is not current, but remove_waiter()
operates on current for the dequeue operation. That results in several
problems:
1) the rbtree dequeue happens without waiter::task::pi_lock being held
2) the waiter task's pi_blocked_on state is not cleared, which leaves a
dangling pointer primed for UAF around.
3) rt_mutex_adjust_prio_chain() operates on the wrong top priority waiter
task
Use waiter::task instead of current in all related operations in
remove_waiter() to cure those problems.
[ tglx: Fixup rt_mutex_adjust_prio_chain(), add a comment and amend the
changelog ]
by gagaltotal
CVSS 7.8
WordPress < 7.0.2 - REST API batch-route confusion and SQL injection issue leading to Remote Code Execution
WordPress 6.9.x before 6.9.5 and 7.0.x before 7.0.2 is affected by a REST API batch endpoint route confusion issue which, combined with the author__not_in WP_Query SQL Injection (CVE-2026-60137), could allow an attacker to perform SQL Injection and achieve Remote Code Execution.
by ctkqiang
WordPress < 7.0.2 - Facilitated SQL Injection via author__not_in in WP_Query
WordPress 6.8.x before 6.8.6, 6.9.x before 6.9.5, and 7.0.x before 7.0.2 does not properly sanitise the author__not_in parameter of WP_Query, which could allow SQL Injection when a plugin or theme passes untrusted input to the parameter.
by ebrasha
CVSS 5.9
WordPress < 7.0.2 - REST API batch-route confusion and SQL injection issue leading to Remote Code Execution
WordPress 6.9.x before 6.9.5 and 7.0.x before 7.0.2 is affected by a REST API batch endpoint route confusion issue which, combined with the author__not_in WP_Query SQL Injection (CVE-2026-60137), could allow an attacker to perform SQL Injection and achieve Remote Code Execution.
by ebrasha
CVSS 9.8
Django 4.2-4.2.27 5.2-5.2.10 6.0-6.0.1 - SQL Injection via RasterField Band Index Parameter
An issue was discovered in 6.0 before 6.0.2, 5.2 before 5.2.11, and 4.2 before 4.2.28.
Raster lookups on ``RasterField`` (only implemented on PostGIS) allows remote attackers to inject SQL via the band index parameter.
Earlier, unsupported Django series (such as 5.0.x, 4.1.x, and 3.2.x) were not evaluated and may also be affected.
Django would like to thank Tarek Nakkouch for reporting this issue.
by ctkqiang
Control Web Panel < 0.9.8.1225 Blind SQL Injection via userRes Parameter
Control Web Panel before 0.9.8.1225 contains a blind SQL injection vulnerability that allows unauthenticated remote attackers to execute arbitrary SQL queries by submitting unsanitized input through the userRes POST parameter at the user endpoint. Attackers can exploit MySQL root privileges obtained via the injection to write arbitrary files using INTO DUMPFILE, enabling deployment of a PHP webshell to the web-accessible roundcube logs directory and achieving remote code execution as the cwpsvc account.
by gagaltotal
CVSS 9.8
Apache Solr: Enabling BasicAuth using bin/solr CLI configures additional insecure users
Hardcoded credentials in the Basic Authentication setup tool (bin/solr auth enable) in Apache Solr versions 9.4.0 through 9.10.1 and 10.0.0 allows a remote attacker to gain full administrative access to the cluster via publicly known default credentials installed silently alongside the user-specified account.
As an immediate workaround without upgrading, delete the template users (superadmin, admin, search, index) from security.json or change their passwords.
The future, not yet released, versions 9.11.0 and 10.1.0 will not be vulnerable, and it will be enough to upgrade to solve the issue.
Not affected:
* Clusters where bin/solr auth enable was not used to bootstrap BasicAuth
* Clusters where template users have been assigned strong passwords after bootstrap
by gagaltotal
CVSS 8.1
React Server Components <19.2.0 - RCE
A pre-authentication remote code execution vulnerability exists in React Server Components versions 19.0.0, 19.1.0, 19.1.1, and 19.2.0 including the following packages: react-server-dom-parcel, react-server-dom-turbopack, and react-server-dom-webpack. The vulnerable code unsafely deserializes payloads from HTTP requests to Server Function endpoints.
by RootEvil333
CVSS 10.0
Gitea Docker image trusts spoofable reverse-proxy headers by default
Gitea Docker image versions up to and including 1.26.2 use REVERSE_PROXY_TRUSTED_PROXIES=* by default, allowing any source IP to impersonate a user when reverse-proxy authentication headers such as X-WEBAUTH-USER are enabled.
by szybnev
CVSS 9.8
UniFi Network Application 9.0.118-10.1.89, 10.2.97 - Path Traversal
A malicious actor with access to the network could exploit a Path Traversal vulnerability found in the UniFi Network Application to access files on the underlying system that could be manipulated to access an underlying account.
by gagaltotal
CVSS 10.0
Gravity SMTP <= 2.1.4 - Unauthenticated Sensitive Information Exposure via REST API
The Gravity SMTP plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 2.1.4. This is due to a REST API endpoint registered at /wp-json/gravitysmtp/v1/tests/mock-data with a permission_callback that unconditionally returns true, allowing any unauthenticated visitor to access it. When the ?page=gravitysmtp-settings query parameter is appended, the plugin's register_connector_data() method populates internal connector data, causing the endpoint to return approximately 365 KB of JSON containing the full System Report. This makes it possible for unauthenticated attackers to retrieve detailed system configuration data including PHP version, loaded extensions, web server version, document root path, database server type and version, WordPress version, all active plugins with versions, active theme, WordPress configuration details, database table names, and any API keys/tokens configured in the plugin.
by faizdotid
CVSS 7.5
HAX open-apis: Credential Theft via Server-Side Request Forgery (SSRF) in open-apis
HAX CMS helps manage microsite universe with PHP or NodeJs backends. Starting in version 9.0.1 and prior to version 26.0.0 of @haxtheweb/open-apis, multiple functions conduct substring-only matching to validate hostnames to which basic authorization should be sent. An attacker can append the matched substrings to an attacker-controlled endpoint and capture authentication. Version 26.0.0 fixes the issue.
by bradyjmcl
Apache Tomcat: Digest authenticator will authenticate any unknown user
DEPRECATED: Authentication Bypass Issues vulnerability in digest authentication in Apache Tomcat.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.21, from 10.1.0-M1 through 10.1.54, from 9.0.0.M1 through 9.0.117, from 8.5.0 through 8.5.100, from before 7.0.0.
Older unsupported versions any also be affect
Users are recommended to upgrade to version 11.0.22, 10.1.55 or 9.0.118 which fix the issue.
by covepseng
CVSS 9.8
DOMPurify < 2.4.2 - Prototype Pollution
DOMPurify is a DOM-only, super-fast, uber-tolerant XSS sanitizer for HTML, MathML and SVG. DOMPurify was vulnerable to prototype pollution. This vulnerability is fixed in 2.4.2.
by Galaxy-sc
CVSS 9.1
DOMPurify < 2.4.2 - Prototype Pollution
DOMPurify is a DOM-only, super-fast, uber-tolerant XSS sanitizer for HTML, MathML and SVG. DOMPurify was vulnerable to prototype pollution. This vulnerability is fixed in 2.4.2.
by Galaxy-sc
CVSS 9.1
net: skbuff: propagate shared-frag marker through frag-transfer helpers
In the Linux kernel, the following vulnerability has been resolved:
net: skbuff: preserve shared-frag marker during coalescing
skb_try_coalesce() can attach paged frags from @from to @to. If @from
has SKBFL_SHARED_FRAG set, the resulting @to skb can contain the same
externally-owned or page-cache-backed frags, but the shared-frag marker
is currently lost.
That breaks the invariant relied on by later in-place writers. In
particular, ESP input checks skb_has_shared_frag() before deciding
whether an uncloned nonlinear skb can skip skb_cow_data(). If TCP
receive coalescing has moved shared frags into an unmarked skb, ESP can
see skb_has_shared_frag() as false and decrypt in place over page-cache
backed frags.
Propagate SKBFL_SHARED_FRAG when skb_try_coalesce() transfers paged
frags. The tailroom copy path does not need the marker because it copies
bytes into @to's linear data rather than transferring frag descriptors.
by 1neptune
CVSS 7.8
rxrpc: Also unshare DATA/RESPONSE packets when paged frags are present
In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Also unshare DATA/RESPONSE packets when paged frags are present
The DATA-packet handler in rxrpc_input_call_event() and the RESPONSE
handler in rxrpc_verify_response() copy the skb to a linear one before
calling into the security ops only when skb_cloned() is true. An skb
that is not cloned but still carries externally-owned paged fragments
(e.g. SKBFL_SHARED_FRAG set by splice() into a UDP socket via
__ip_append_data, or a chained skb_has_frag_list()) falls through to
the in-place decryption path, which binds the frag pages directly into
the AEAD/skcipher SGL via skb_to_sgvec().
Extend the gate to also unshare when skb_has_frag_list() or
skb_has_shared_frag() is true. This catches the splice-loopback vector
and other externally-shared frag sources while preserving the
zero-copy fast path for skbs whose frags are kernel-private (e.g. NIC
page_pool RX, GRO). The OOM/trace handling already in place is reused.
by 1neptune
CVSS 7.8
xfrm: esp: avoid in-place decrypt on shared skb frags
In the Linux kernel, the following vulnerability has been resolved:
xfrm: esp: avoid in-place decrypt on shared skb frags
MSG_SPLICE_PAGES can attach pages from a pipe directly to an skb. TCP
marks such skbs with SKBFL_SHARED_FRAG after skb_splice_from_iter(),
so later paths that may modify packet data can first make a private
copy. The IPv4/IPv6 datagram append paths did not set this flag when
splicing pages into UDP skbs.
That leaves an ESP-in-UDP packet made from shared pipe pages looking
like an ordinary uncloned nonlinear skb. ESP input then takes the no-COW
fast path for uncloned skbs without a frag_list and decrypts in place
over data that is not owned privately by the skb.
Mark IPv4/IPv6 datagram splice frags with SKBFL_SHARED_FRAG, matching
TCP. Also make ESP input fall back to skb_cow_data() when the flag is
present, so ESP does not decrypt externally backed frags in place.
Private nonlinear skb frags still use the existing fast path.
This intentionally does not change ESP output. In esp_output_head(),
the path that appends the ESP trailer to existing skb tailroom without
calling skb_cow_data() is not reachable for nonlinear skbs:
skb_tailroom() returns zero when skb->data_len is nonzero, while ESP
tailen is positive. Thus ESP output will either use the separate
destination-frag path or fall back to skb_cow_data().
by 1neptune
CVSS 8.8
crypto: algif_aead - Revert to operating out-of-place
In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_aead - Revert to operating out-of-place
This mostly reverts commit 72548b093ee3 except for the copying of
the associated data.
There is no benefit in operating in-place in algif_aead since the
source and destination come from different mappings. Get rid of
all the complexity added for in-place operation and just copy the
AD directly.
by 1neptune
CVSS 7.8
React Server Components <19.2.0 - RCE
A pre-authentication remote code execution vulnerability exists in React Server Components versions 19.0.0, 19.1.0, 19.1.1, and 19.2.0 including the following packages: react-server-dom-parcel, react-server-dom-turbopack, and react-server-dom-webpack. The vulnerable code unsafely deserializes payloads from HTTP requests to Server Function endpoints.
by w3nch
rxrpc: Also unshare DATA/RESPONSE packets when paged frags are present
In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Also unshare DATA/RESPONSE packets when paged frags are present
The DATA-packet handler in rxrpc_input_call_event() and the RESPONSE
handler in rxrpc_verify_response() copy the skb to a linear one before
calling into the security ops only when skb_cloned() is true. An skb
that is not cloned but still carries externally-owned paged fragments
(e.g. SKBFL_SHARED_FRAG set by splice() into a UDP socket via
__ip_append_data, or a chained skb_has_frag_list()) falls through to
the in-place decryption path, which binds the frag pages directly into
the AEAD/skcipher SGL via skb_to_sgvec().
Extend the gate to also unshare when skb_has_frag_list() or
skb_has_shared_frag() is true. This catches the splice-loopback vector
and other externally-shared frag sources while preserving the
zero-copy fast path for skbs whose frags are kernel-private (e.g. NIC
page_pool RX, GRO). The OOM/trace handling already in place is reused.
by First-John
CVSS 7.8
xfrm: esp: avoid in-place decrypt on shared skb frags
In the Linux kernel, the following vulnerability has been resolved:
xfrm: esp: avoid in-place decrypt on shared skb frags
MSG_SPLICE_PAGES can attach pages from a pipe directly to an skb. TCP
marks such skbs with SKBFL_SHARED_FRAG after skb_splice_from_iter(),
so later paths that may modify packet data can first make a private
copy. The IPv4/IPv6 datagram append paths did not set this flag when
splicing pages into UDP skbs.
That leaves an ESP-in-UDP packet made from shared pipe pages looking
like an ordinary uncloned nonlinear skb. ESP input then takes the no-COW
fast path for uncloned skbs without a frag_list and decrypts in place
over data that is not owned privately by the skb.
Mark IPv4/IPv6 datagram splice frags with SKBFL_SHARED_FRAG, matching
TCP. Also make ESP input fall back to skb_cow_data() when the flag is
present, so ESP does not decrypt externally backed frags in place.
Private nonlinear skb frags still use the existing fast path.
This intentionally does not change ESP output. In esp_output_head(),
the path that appends the ESP trailer to existing skb tailroom without
calling skb_cow_data() is not reachable for nonlinear skbs:
skb_tailroom() returns zero when skb->data_len is nonzero, while ESP
tailen is positive. Thus ESP output will either use the separate
destination-frag path or fall back to skb_cow_data().
by First-John
CVSS 8.8
crypto: algif_aead - Revert to operating out-of-place
In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_aead - Revert to operating out-of-place
This mostly reverts commit 72548b093ee3 except for the copying of
the associated data.
There is no benefit in operating in-place in algif_aead since the
source and destination come from different mappings. Get rid of
all the complexity added for in-place operation and just copy the
AD directly.
by First-John
CVSS 7.8
rxrpc: Also unshare DATA/RESPONSE packets when paged frags are present
In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Also unshare DATA/RESPONSE packets when paged frags are present
The DATA-packet handler in rxrpc_input_call_event() and the RESPONSE
handler in rxrpc_verify_response() copy the skb to a linear one before
calling into the security ops only when skb_cloned() is true. An skb
that is not cloned but still carries externally-owned paged fragments
(e.g. SKBFL_SHARED_FRAG set by splice() into a UDP socket via
__ip_append_data, or a chained skb_has_frag_list()) falls through to
the in-place decryption path, which binds the frag pages directly into
the AEAD/skcipher SGL via skb_to_sgvec().
Extend the gate to also unshare when skb_has_frag_list() or
skb_has_shared_frag() is true. This catches the splice-loopback vector
and other externally-shared frag sources while preserving the
zero-copy fast path for skbs whose frags are kernel-private (e.g. NIC
page_pool RX, GRO). The OOM/trace handling already in place is reused.
by First-John
CVSS 7.8
By Source