Critical Vulnerabilities with Public Exploits

A unverified password change vulnerability in Fortinet FortiSwitch GUI may allow a remote unauthenticated attacker to change admin passwords via a specially crafted request

A NoSQL injection vulnerability in AquilaCMS 1.409.20 and prior allows unauthenticated attackers to reset user and administrator account passwords via the "Reset password" feature.

A stored cross-site scripting (XSS) vulnerability in Typecho v1.3.0 allows attackers to execute arbitrary web scripts or HTML via a crafted payload.

An issue in Intelight X-1L Traffic controller Maxtime v.1.9.6 allows a remote attacker to execute arbitrary code via the /cgi-bin/generateForm.cgi?formID=142 component.

InfluxDB OSS 2.x through 2.7.11 stores the administrative operator token under the default organization which allows authorized users with read access to the authorization resource of the default organization to retrieve the operator token. InfluxDB OSS 1.x, Enterprise, Cloud, Cloud Dedicated and Clustered are not affected. NOTE: The researcher states that InfluxDB allows allAccess administrators to retrieve all raw tokens via an "influx auth ls" command. The supplier indicates that the organizations feature is operating as intended and that users may choose to add users to non-default organizations. A future release of InfluxDB 2.x will remove the ability to retrieve tokens from the API. The supplier has stated that InfluxDB 2.8.0 has addressed this issue.

BuildKit is a toolkit for converting source code to build artifacts in an efficient, expressive and repeatable manner. In addition to running containers as build steps, BuildKit also provides APIs for running interactive containers based on built images. It was possible to use these APIs to ask BuildKit to run a container with elevated privileges. Normally, running such containers is only allowed if special `security.insecure` entitlement is enabled both by buildkitd configuration and allowed by the user initializing the build request. The issue has been fixed in v0.12.5 . Avoid using BuildKit frontends from untrusted sources.

Unauthorized file access in WEB Server in ABB ASPECT - Enterprise v3.08.01; NEXUS Series v3.08.01 ; MATRIX Series v3.08.01 allows Attacker to execute arbitrary code remotely

Unauthorized file access in WEB Server in ABB ASPECT - Enterprise v3.08.01; NEXUS Series v3.08.01 ; MATRIX Series v3.08.01 allows Attacker to access files unauthorized

An issue discovered in pdfmake 0.2.9 allows remote attackers to run arbitrary code via crafted POST request to the /pdf endpoint. NOTE: this is disputed because the behavior of the /pdf endpoint is intentional. The /pdf endpoint is only available after installing a test framework (that lives outside of the pdfmake applicaton). Anyone installing this is responsible for ensuring that it is only available to authorized testers.

SQL Injection vulnerability in Lost and Found Information System 1.0 allows a remote attacker to escalate privileges via the id parameter to php-lfis/admin/categories/manage_category.php.

NVIDIA Container Toolkit 1.16.1 or earlier contains a Time-of-check Time-of-Use (TOCTOU) vulnerability when used with default configuration where a specifically crafted container image may gain access to the host file system. This does not impact use cases where CDI is used. A successful exploit of this vulnerability may lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering.

In invoke-ai/invokeai version v5.0.2, the web API `POST /api/v1/images/delete` is vulnerable to Arbitrary File Deletion. This vulnerability allows unauthorized attackers to delete arbitrary files on the server, potentially including critical or sensitive system files such as SSH keys, SQLite databases, and configuration files. This can impact the integrity and availability of applications relying on these files.

xml-crypto is an xml digital signature and encryption library for Node.js. In affected versions the default configuration does not check authorization of the signer, it only checks the validity of the signature per section 3.2.2 of the w3 xmldsig-core-20080610 spec. As such, without additional validation steps, the default configuration allows a malicious actor to re-sign an XML document, place the certificate in a `<KeyInfo />` element, and pass `xml-crypto` default validation checks. As a result `xml-crypto` trusts by default any certificate provided via digitally signed XML document's `<KeyInfo />`. `xml-crypto` prefers to use any certificate provided via digitally signed XML document's `<KeyInfo />` even if library was configured to use specific certificate (`publicCert`) for signature verification purposes. An attacker can spoof signature verification by modifying XML document and replacing existing signature with signature generated with malicious private key (created by attacker) and by attaching that private key's certificate to `<KeyInfo />` element. This vulnerability is combination of changes introduced to `4.0.0` on pull request 301 / commit `c2b83f98` and has been addressed in version 6.0.0 with pull request 445 / commit `21201723d`. Users are advised to upgrade. Users unable to upgrade may either check the certificate extracted via `getCertFromKeyInfo` against trusted certificates before accepting the results of the validation or set `xml-crypto's getCertFromKeyInfo` to `() => undefined` forcing `xml-crypto` to use an explicitly configured `publicCert` or `privateKey` for signature verification.

An issue has been discovered in GitLab CE/EE affecting all versions from 16.0 prior to 16.6.6, 16.7 prior to 16.7.4, and 16.8 prior to 16.8.1 which allows an authenticated user to write files to arbitrary locations on the GitLab server while creating a workspace.

TP-Link TL-WR845N devices with firmware TL-WR845N(UN)_V4_200909 and TL-WR845N(UN)_V4_190219 was discovered to contain a hardcoded password for the root account which can be obtained by analyzing downloaded firmware or via a brute force attack through physical access to the router. NOTE: The supplier has stated that this issue was fixed in firmware versions 250401 or later.

Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an empty supported client protocols buffer may cause a crash or memory contents to be sent to the peer. Impact summary: A buffer overread can have a range of potential consequences such as unexpected application beahviour or a crash. In particular this issue could result in up to 255 bytes of arbitrary private data from memory being sent to the peer leading to a loss of confidentiality. However, only applications that directly call the SSL_select_next_proto function with a 0 length list of supported client protocols are affected by this issue. This would normally never be a valid scenario and is typically not under attacker control but may occur by accident in the case of a configuration or programming error in the calling application. The OpenSSL API function SSL_select_next_proto is typically used by TLS applications that support ALPN (Application Layer Protocol Negotiation) or NPN (Next Protocol Negotiation). NPN is older, was never standardised and is deprecated in favour of ALPN. We believe that ALPN is significantly more widely deployed than NPN. The SSL_select_next_proto function accepts a list of protocols from the server and a list of protocols from the client and returns the first protocol that appears in the server list that also appears in the client list. In the case of no overlap between the two lists it returns the first item in the client list. In either case it will signal whether an overlap between the two lists was found. In the case where SSL_select_next_proto is called with a zero length client list it fails to notice this condition and returns the memory immediately following the client list pointer (and reports that there was no overlap in the lists). This function is typically called from a server side application callback for ALPN or a client side application callback for NPN. In the case of ALPN the list of protocols supplied by the client is guaranteed by libssl to never be zero in length. The list of server protocols comes from the application and should never normally be expected to be of zero length. In this case if the SSL_select_next_proto function has been called as expected (with the list supplied by the client passed in the client/client_len parameters), then the application will not be vulnerable to this issue. If the application has accidentally been configured with a zero length server list, and has accidentally passed that zero length server list in the client/client_len parameters, and has additionally failed to correctly handle a "no overlap" response (which would normally result in a handshake failure in ALPN) then it will be vulnerable to this problem. In the case of NPN, the protocol permits the client to opportunistically select a protocol when there is no overlap. OpenSSL returns the first client protocol in the no overlap case in support of this. The list of client protocols comes from the application and should never normally be expected to be of zero length. However if the SSL_select_next_proto function is accidentally called with a client_len of 0 then an invalid memory pointer will be returned instead. If the application uses this output as the opportunistic protocol then the loss of confidentiality will occur. This issue has been assessed as Low severity because applications are most likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not widely used. It also requires an application configuration or programming error. Finally, this issue would not typically be under attacker control making active exploitation unlikely. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available.

Incorrect Privilege Assignment vulnerability in wpweb WooCommerce PDF Vouchers woocommerce-pdf-vouchers allows Privilege Escalation.This issue affects WooCommerce PDF Vouchers: from n/a through < 4.9.9.

The MultiVendorX – The Ultimate WooCommerce Multivendor Marketplace Solution plugin for WordPress is vulnerable to privilege escalation/de-escalation and account takeover due to an insufficient capability check on the update_item_permissions_check and create_item_permissions_check functions in all versions up to, and including, 4.2.0. This makes it possible for unauthenticated attackers to change the password of any user with the vendor role, create new users with the vendor role, and demote other users like administrators to the vendor role.

Tasklists provides plugin tasklists for GLPI. Versions prior to 2.0.4 have a blind SQL injection vulnerability. Version 2.0.4 contains a patch for the vulnerability.

Ghost through 5.76.0 allows stored XSS, and resultant privilege escalation in which a contributor can take over any account, via an SVG profile picture that contains JavaScript code to interact with the API on localhost TCP port 3001. NOTE: The discoverer reports that "The vendor does not view this as a valid vector."