Latest Vulnerabilities with Public Exploits

A privileged attacker can prevent delivery of debug exceptions to SEV-SNP guests potentially resulting in guests not receiving expected debug information.

Directory Traversal vulnerability in Ivanti Avalanche 6.3.4.153 allows a remote authenticated attacker to obtain sensitive information via the javax.faces.resource component.

An issue was discovered in the Linux kernel before 6.5.9, exploitable by local users with userspace access to MMIO registers. Incorrect access checking in the #VC handler and instruction emulation of the SEV-ES emulation of MMIO accesses could lead to arbitrary write access to kernel memory (and thus privilege escalation). This depends on a race condition through which userspace can replace an instruction before the #VC handler reads it.

An issue in Buffalo LS210D v.1.78-0.03 allows a remote attacker to execute arbitrary code via the Firmware Update Script at /etc/init.d/update_notifications.sh.

In Cassia Gateway firmware XC1000_2.1.1.2303082218 and XC2000_2.1.1.2303090947, the queueUrl parameter in /bypass/config is not sanitized. This leads to injecting Bash code and executing it with root privileges on device startup.

In run of MDnsSdListener.cpp, there is a possible memory corruption due to a use after free. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

Postfix through 3.8.5 allows SMTP smuggling unless configured with smtpd_data_restrictions=reject_unauth_pipelining and smtpd_discard_ehlo_keywords=chunking (or certain other options that exist in recent versions). Remote attackers can use a published exploitation technique to inject e-mail messages with a spoofed MAIL FROM address, allowing bypass of an SPF protection mechanism. This occurs because Postfix supports <LF>.<CR><LF> but some other popular e-mail servers do not. To prevent attack variants (by always disallowing <LF> without <CR>), a different solution is required, such as the smtpd_forbid_bare_newline=yes option with a Postfix minimum version of 3.5.23, 3.6.13, 3.7.9, 3.8.4, or 3.9.

Multi-Remote Next Generation Connection Manager (mRemoteNG) is free software that enables users to store and manage multi-protocol connection configurations to remotely connect to systems. mRemoteNG configuration files can be stored in an encrypted state on disk. mRemoteNG version <= v1.76.20 and <= 1.77.3-dev loads configuration files in plain text into memory (after decrypting them if necessary) at application start-up, even if no connection has been established yet. This allows attackers to access contents of configuration files in plain text through a memory dump and thus compromise user credentials when no custom password encryption key has been set. This also bypasses the connection configuration file encryption setting by dumping already decrypted configurations from memory.

A vulnerability, which was classified as problematic, was found in PHPGurukul Hospital Management System 1.0. This affects an unknown part of the file registration.php. The manipulation of the argument First Name leads to cross site scripting. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-249357 was assigned to this vulnerability.

A vulnerability, which was classified as critical, has been found in PHPGurukul Hospital Management System 1.0. Affected by this issue is some unknown functionality of the component Admin Dashboard. The manipulation leads to sql injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-249356.

FLIR AX8 thermal sensor cameras up to and including 1.46.16 are vulnerable to Directory Traversal due to improper access restriction. This vulnerability allows an unauthenticated, remote attacker to obtain arbitrary sensitive file contents by uploading a specially crafted symbolic link file. NOTE: The vendor has stated that with the introduction of firmware version 1.49.16 (Jan 2023) the FLIR AX8 should no longer be affected by the vulnerability reported. Latest firmware version (as of Oct 2025, was released Jun 2024) is 1.55.16.

Command injection vulnerability in /usr/www/res.php in FLIR AX8 up to 1.46.16 allows attackers to run arbitrary commands via the value parameter. NOTE: The vendor has stated that with the introduction of firmware version 1.49.16 (Jan 2023) the FLIR AX8 should no longer be affected by the vulnerability reported. Latest firmware version (as of Oct 2025, was released Jun 2024) is 1.55.16.

Parallels Desktop Updater Link Following Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of Parallels Desktop. An attacker must first obtain the ability to execute low-privileged code on the target host system in order to exploit this vulnerability. The specific flaw exists within the Updater service. By creating a symbolic link, an attacker can abuse the service to move arbitrary files. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of root. . Was ZDI-CAN-21227.

The ERP WordPress plugin before 1.12.4 does not properly sanitise and escape the `type` parameter in the `erp/v1/accounting/v1/people` REST API endpoint before using it in a SQL statement, leading to a SQL injection exploitable by high privilege users such as admin.

An open redirect vulnerability in the python package Flask-Security-Too <=5.3.2 allows attackers to redirect unsuspecting users to malicious sites via a crafted URL by abusing the ?next parameter on the /login and /register routes.

Sourcecodester Customer Support System 1.0 has multiple SQL injection vulnerabilities in /customer_support/ajax.php?action=save_ticket via department_id, customer_id, and subject.

Windows SmartScreen Security Feature Bypass Vulnerability

A vulnerability in Solar-Log Base 15 Firmware 6.0.1 Build 161, and possibly other Solar-Log Base products, allows an attacker to escalate their privileges by exploiting a stored cross-site scripting (XSS) vulnerability in the switch group function under /#ilang=DE&b=c_smartenergy_swgroups in the web portal. The vulnerability can be exploited to gain the rights of an installer or PM, which can then be used to gain administrative access to the web portal and execute further attacks. NOTE: The vendor states that this vulnerability has been fixed with 3.0.0-60 11.10.2013 for SL 200, 500, 1000 / not existing for SL 250, 300, 1200, 2000, SL 50 Gateway, SL Base.

JumpServer is an open source bastion host. Logged-in users can access and modify the contents of any file on the system. A user can use the 'Job-Template' menu and create a playbook named 'test'. Get the playbook id from the detail page, like 'e0adabef-c38f-492d-bd92-832bacc3df5f'. An attacker can exploit the directory traversal flaw using the provided URL to access and retrieve the contents of the file. `https://jumpserver-ip/api/v1/ops/playbook/e0adabef-c38f-492d-bd92-832bacc3df5f/file/?key=../../../../../../../etc/passwd` a similar method to modify the file content is also present. This issue has been addressed in version 3.6.5. Users are advised to upgrade. There are no known workarounds for this vulnerability.

The com.cutestudio.colordialer application through 2.1.8-2 for Android allows a remote attacker to initiate phone calls without user consent, because of improper export of the com.cutestudio.dialer.activities.DialerActivity component. A third-party application (without any permissions) can craft an intent targeting com.cutestudio.dialer.activities.DialerActivity via the android.intent.action.CALL action in conjunction with a tel: URI, thereby placing a phone call.